[PATCH v3 0/6] Fix issues on pf8x00 driver

[Adrien Grassein]

Hello,

this patch set aims is to fix some issues contains in the pf8x00 driver.
Some issues are documentation ones, some others are in code.

These issues where found while developing another version of the same
driver. I prefer to share with you the patch for it.

I do these patches on the master branch of the linux-next repository.

1: there is a missing documentation when we build the driver as a
module.

2: nxp,phase-shift documentation was not optimal.

3: nxp,ilim-ma is useless since another property does (nearly) the same.

4: Same than 4, in driver code.

5: It's better to use a linear_range to describe the voltage of bucks.

6: Fix several mistakes in the handle of nxp,phase-shift property.

Changes introduced in v2:
Some patches were mixed (and did not compile separately);
Add path 7 for the handle of nxp,phase-shift property.

Changes introduced in v3:
Remove useless patch 0;
Do requested fixes in patches.

Thanks,

Adrien Grassein (6):
  regulator: pf8x00: add a doc for the module
  regulator: dt-bindings: pf8x00: fix nxp,phase-shift doc
  regulator: dt-bindings: pf8x00: remove nxp,ilim-ma property
  regulator: pf8x00: remove nxp,ilim-ma property
  regulator: pf8x00: use linear range for buck 1-6
  regulator: pf8x00: fix nxp,phase-shift

 .../regulator/nxp,pf8x00-regulator.yaml       |  27 +--
 drivers/regulator/Kconfig                     |   4 +
 drivers/regulator/pf8x00-regulator.c          | 174 ++++++++----------
 3 files changed, 79 insertions(+), 126 deletions(-)

-- 
2.25.1