Re: [PATCH] drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()

From: Felix Kuehling
Date: Fri Jan 08 2021 - 18:47:17 EST

Next message: Atish Patra: "Re: [PATCH v2 0/2] CLK: microchip: Add clkcfg driver for Microchip PolarFire SoC"
Previous message: Thomas Bogendoerfer: "Re: Old platforms: bring out your dead"
In reply to: Jeremy Cline: "[PATCH] drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()"
Next in thread: Jeremy Cline: "Re: [PATCH] drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Am 2021-01-08 um 11:31 a.m. schrieb Jeremy Cline:
> KASAN reported a slab-out-of-bounds read of size 1 in
> kdf_create_vcrat_image_cpu().
>
> This occurs when, for example, when on an x86_64 with a single NUMA node
> because kfd_fill_iolink_info_for_cpu() is a no-op, but afterwards the
> sub_type_hdr->length, which is out-of-bounds, is read and multiplied by
> entries. Fortunately, entries is 0 in this case so the overall
> crat_table->length is still correct.

That's a pretty big change to fix that. Wouldn't it be enough to add a
simple check after calling kfd_fill_iolink_info_for_cpu:

if (entries) {
crat_table->length += (sub_type_hdr->length * entries);
crat_table->total_entries += entries;
}

Or change the output parameters of the kfd_fill_..._for_cpu functions
from num_entries to size_filled, so the caller doesn't need to read
sub_type_hdr->length any more.

Regards,
Felix

>
> This refactors the helper functions to accept the crat_table directly
> and calculate the table entry pointer based on the current table length.
> This allows us to avoid an out-of-bounds read and hopefully makes the
> pointer arithmetic clearer. It should have no functional change beyond
> removing the out-of-bounds read.
>
> Fixes: b7b6c38529c9 ("drm/amdkfd: Calculate CPU VCRAT size dynamically (v2)")
> Signed-off-by: Jeremy Cline <jcline@xxxxxxxxxx>
> ---
> drivers/gpu/drm/amd/amdkfd/kfd_crat.c | 86 +++++++++++++--------------
> 1 file changed, 40 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> index 8cac497c2c45..e50db2c0f4ee 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> @@ -829,21 +829,24 @@ int kfd_create_crat_image_acpi(void **crat_image, size_t *size)
> /* kfd_fill_cu_for_cpu - Fill in Compute info for the given CPU NUMA node
> *
> * @numa_node_id: CPU NUMA node id
> - * @avail_size: Available size in the memory
> - * @sub_type_hdr: Memory into which compute info will be filled in
> + * @avail_size: Available space in bytes at the end of the @crat_table.
> + * @crat_table: The CRAT table to append the Compute info to;
> + * on success the table length and total_entries count is updated.
> *
> * Return 0 if successful else return -ve value
> */
> static int kfd_fill_cu_for_cpu(int numa_node_id, int *avail_size,
> - int proximity_domain,
> - struct crat_subtype_computeunit *sub_type_hdr)
> + struct crat_header *crat_table)
> {
> const struct cpumask *cpumask;
> + struct crat_subtype_computeunit *sub_type_hdr;
>
> *avail_size -= sizeof(struct crat_subtype_computeunit);
> if (*avail_size < 0)
> return -ENOMEM;
>
> + sub_type_hdr = (typeof(sub_type_hdr))((char *)crat_table +
> + crat_table->length);
> memset(sub_type_hdr, 0, sizeof(struct crat_subtype_computeunit));
>
> /* Fill in subtype header data */
> @@ -855,36 +858,42 @@ static int kfd_fill_cu_for_cpu(int numa_node_id, int *avail_size,
>
> /* Fill in CU data */
> sub_type_hdr->flags |= CRAT_CU_FLAGS_CPU_PRESENT;
> - sub_type_hdr->proximity_domain = proximity_domain;
> + sub_type_hdr->proximity_domain = crat_table->num_domains;
> sub_type_hdr->processor_id_low = kfd_numa_node_to_apic_id(numa_node_id);
> if (sub_type_hdr->processor_id_low == -1)
> return -EINVAL;
>
> sub_type_hdr->num_cpu_cores = cpumask_weight(cpumask);
>
> + crat_table->length += sub_type_hdr->length;
> + crat_table->total_entries++;
> +
> return 0;
> }
>
> /* kfd_fill_mem_info_for_cpu - Fill in Memory info for the given CPU NUMA node
> *
> * @numa_node_id: CPU NUMA node id
> - * @avail_size: Available size in the memory
> - * @sub_type_hdr: Memory into which compute info will be filled in
> + * @avail_size: Available space in bytes at the end of the @crat_table.
> + * @crat_table: The CRAT table to append the Memory info to;
> + * on success the table length and total_entries count is updated.
> *
> * Return 0 if successful else return -ve value
> */
> static int kfd_fill_mem_info_for_cpu(int numa_node_id, int *avail_size,
> - int proximity_domain,
> - struct crat_subtype_memory *sub_type_hdr)
> + struct crat_header *crat_table)
> {
> uint64_t mem_in_bytes = 0;
> pg_data_t *pgdat;
> int zone_type;
> + struct crat_subtype_memory *sub_type_hdr;
>
> *avail_size -= sizeof(struct crat_subtype_memory);
> if (*avail_size < 0)
> return -ENOMEM;
>
> + sub_type_hdr = (typeof(sub_type_hdr))((char *)crat_table +
> + crat_table->length);
> memset(sub_type_hdr, 0, sizeof(struct crat_subtype_memory));
>
> /* Fill in subtype header data */
> @@ -905,27 +914,37 @@ static int kfd_fill_mem_info_for_cpu(int numa_node_id, int *avail_size,
>
> sub_type_hdr->length_low = lower_32_bits(mem_in_bytes);
> sub_type_hdr->length_high = upper_32_bits(mem_in_bytes);
> - sub_type_hdr->proximity_domain = proximity_domain;
> + sub_type_hdr->proximity_domain = crat_table->num_domains;
> +
> + crat_table->length += sub_type_hdr->length;
> + crat_table->total_entries++;
>
> return 0;
> }
>
> #ifdef CONFIG_X86_64
> +/* kfd_fill_iolink_info_for_cpu() - Add IO link info to a Virtual CRAT
> + *
> + * @numa_node_id: The NUMA node ID for the CPU; as from for_each_online_node()
> + * @avail_size: Available space in bytes at the end of the @crat_table.
> + * @crat_table: The CRAT table to append the IO link info to; on success the
> + * table length and total_entries count is updated.
> + *
> + * Return: 0 if successful else return -ve value
> + */
> static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
> - uint32_t *num_entries,
> - struct crat_subtype_iolink *sub_type_hdr)
> + struct crat_header *crat_table)
> {
> int nid;
> struct cpuinfo_x86 *c = &cpu_data(0);
> uint8_t link_type;
> + struct crat_subtype_iolink *sub_type_hdr;
>
> if (c->x86_vendor == X86_VENDOR_AMD)
> link_type = CRAT_IOLINK_TYPE_HYPERTRANSPORT;
> else
> link_type = CRAT_IOLINK_TYPE_QPI_1_1;
>
> - *num_entries = 0;
> -
> /* Create IO links from this node to other CPU nodes */
> for_each_online_node(nid) {
> if (nid == numa_node_id) /* node itself */
> @@ -935,6 +954,8 @@ static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
> if (*avail_size < 0)
> return -ENOMEM;
>
> + sub_type_hdr = (typeof(sub_type_hdr))((char *)crat_table +
> + crat_table->length);
> memset(sub_type_hdr, 0, sizeof(struct crat_subtype_iolink));
>
> /* Fill in subtype header data */
> @@ -947,8 +968,8 @@ static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
> sub_type_hdr->proximity_domain_to = nid;
> sub_type_hdr->io_interface_type = link_type;
>
> - (*num_entries)++;
> - sub_type_hdr++;
> + crat_table->length += sub_type_hdr->length;
> + crat_table->total_entries++;
> }
>
> return 0;
> @@ -966,12 +987,8 @@ static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
> struct crat_header *crat_table = (struct crat_header *)pcrat_image;
> struct acpi_table_header *acpi_table;
> acpi_status status;
> - struct crat_subtype_generic *sub_type_hdr;
> int avail_size = *size;
> int numa_node_id;
> -#ifdef CONFIG_X86_64
> - uint32_t entries = 0;
> -#endif
> int ret = 0;
>
> if (!pcrat_image)
> @@ -1003,48 +1020,25 @@ static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
> crat_table->total_entries = 0;
> crat_table->num_domains = 0;
>
> - sub_type_hdr = (struct crat_subtype_generic *)(crat_table+1);
> -
> for_each_online_node(numa_node_id) {
> if (kfd_numa_node_to_apic_id(numa_node_id) == -1)
> continue;
>
> /* Fill in Subtype: Compute Unit */
> - ret = kfd_fill_cu_for_cpu(numa_node_id, &avail_size,
> - crat_table->num_domains,
> - (struct crat_subtype_computeunit *)sub_type_hdr);
> + ret = kfd_fill_cu_for_cpu(numa_node_id, &avail_size, crat_table);
> if (ret < 0)
> return ret;
> - crat_table->length += sub_type_hdr->length;
> - crat_table->total_entries++;
> -
> - sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
> - sub_type_hdr->length);
>
> /* Fill in Subtype: Memory */
> - ret = kfd_fill_mem_info_for_cpu(numa_node_id, &avail_size,
> - crat_table->num_domains,
> - (struct crat_subtype_memory *)sub_type_hdr);
> + ret = kfd_fill_mem_info_for_cpu(numa_node_id, &avail_size, crat_table);
> if (ret < 0)
> return ret;
> - crat_table->length += sub_type_hdr->length;
> - crat_table->total_entries++;
> -
> - sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
> - sub_type_hdr->length);
>
> /* Fill in Subtype: IO Link */
> #ifdef CONFIG_X86_64
> - ret = kfd_fill_iolink_info_for_cpu(numa_node_id, &avail_size,
> - &entries,
> - (struct crat_subtype_iolink *)sub_type_hdr);
> + ret = kfd_fill_iolink_info_for_cpu(numa_node_id, &avail_size, crat_table);
> if (ret < 0)
> return ret;
> - crat_table->length += (sub_type_hdr->length * entries);
> - crat_table->total_entries += entries;
> -
> - sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
> - sub_type_hdr->length * entries);
> #else
> pr_info("IO link not available for non x86 platforms\n");
> #endif

Next message: Atish Patra: "Re: [PATCH v2 0/2] CLK: microchip: Add clkcfg driver for Microchip PolarFire SoC"
Previous message: Thomas Bogendoerfer: "Re: Old platforms: bring out your dead"
In reply to: Jeremy Cline: "[PATCH] drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()"
Next in thread: Jeremy Cline: "Re: [PATCH] drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]