Re: [PATCH 7/7] arm64: dts: qcom: sdm845: enable dma for spi

[Vinod Koul]

On 11-01-21, 08:47, Doug Anderson wrote:
> Hi,
> 
> On Mon, Jan 11, 2021 at 7:18 AM Vinod Koul <vkoul@xxxxxxxxxx> wrote:
> >
> > @@ -2622,6 +2626,13 @@ pinmux {
> >                                                "gpio2", "gpio3";
> >                                         function = "qup0";
> >                                 };
> > +
> > +                               config {
> 
> Convention in Qualcomm device tree files seems to be that the node is
> "pinconf", not "config".

Yes missed that, thanks for pointing
> 
> 
> > +                                       pins = "gpio0", "gpio1",
> > +                                              "gpio2", "gpio3";
> > +                                       drive-strength = <6>;
> > +                                       bias-disable;
> > +                               };
> 
> Pin config almost never belongs in the SoC dtsi file.  This should be
> in the board .dts file.  What if pulls are needed on some pins?  What
> if you need a stronger or weaker drive strength?

Right I will move it to dtsi

-- 
~Vinod