[PATCH 2/2] arm64: dts: qcom: pm8916: Add batt_id channel node

[Jonathan Albrieux]

Working on a battery charger and fuel gauge driver it happened to
have the need to read from VADC_LR_MUX2_BAT_ID channel. Here is
the declaration from downstream msm8916.dtsi:

	chan@31 {
		label = "batt_id";
		reg = <0x31>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0xb>;
		qcom,fast-avg-setup = <0>;
	};

Add VADC_LR_MUX2_BAT_ID accordingly.

Signed-off-by: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm8916.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index a7663bf867ec..854e51883289 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -95,6 +95,11 @@
 			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
+			adc-chan@g {
+				reg = <VADC_LR_MUX2_BAT_ID>;
+				qcom,hw-settle-time = <2000>;
+				qcom,ratiometric;
+			};
 		};
 
 		rtc@6000 {
-- 
2.17.1