RE: [PATCH v17 02/10] fs/ntfs3: Add initialization of super block

[Konstantin Komarov]

From: Kari Argillander <kari.argillander@xxxxxxxxx>
Sent: Sunday, January 3, 2021 10:50 PM
> To: Konstantin Komarov <almaz.alexandrovich@xxxxxxxxxxxxxxxxxxxx>
> Cc: linux-fsdevel@xxxxxxxxxxxxxxx; viro@xxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; pali@xxxxxxxxxx; dsterba@xxxxxxx;
> aaptel@xxxxxxxx; willy@xxxxxxxxxxxxx; rdunlap@xxxxxxxxxxxxx; joe@xxxxxxxxxxx; mark@xxxxxxxxxxxxx; nborisov@xxxxxxxx;
> linux-ntfs-dev@xxxxxxxxxxxxxxxxxxxxx; anton@xxxxxxxxxx; dan.carpenter@xxxxxxxxxx; hch@xxxxxx; ebiggers@xxxxxxxxxx;
> andy.lavr@xxxxxxxxx
> Subject: Re: [PATCH v17 02/10] fs/ntfs3: Add initialization of super block
> 
> On Thu, Dec 31, 2020 at 06:23:53PM +0300, Konstantin Komarov wrote:
> 
> > diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c
> 
> > +int ntfs_loadlog_and_replay(struct ntfs_inode *ni, struct ntfs_sb_info *sbi)
> > +{
> > +	int err = 0;
> > +	struct super_block *sb = sbi->sb;
> > +	struct inode *inode = &ni->vfs_inode;
> > +	struct MFT_REF ref;
> > +
> > +	/* Check for 4GB */
> > +	if (inode->i_size >= 0x100000000ull) {
> > +		ntfs_err(sb, "$LogFile is too big");
> > +		err = -EINVAL;
> > +		goto out;
> > +	}
> > +
> > +	sbi->flags |= NTFS_FLAGS_LOG_REPLAYING;
> > +
> > +	ref.low = cpu_to_le32(MFT_REC_MFT);
> > +	ref.high = 0;
> > +	ref.seq = cpu_to_le16(1);
> > +
> > +	inode = ntfs_iget5(sb, &ref, NULL);
> > +
> > +	if (IS_ERR(inode))
> > +		inode = NULL;
> > +
> > +	if (!inode) {
> > +		/* Try to use mft copy */
> > +		u64 t64 = sbi->mft.lbo;
> > +
> > +		sbi->mft.lbo = sbi->mft.lbo2;
> > +		inode = ntfs_iget5(sb, &ref, NULL);
> > +		sbi->mft.lbo = t64;
> > +		if (IS_ERR(inode))
> > +			inode = NULL;
> > +	}
> > +
> > +	if (!inode) {
> > +		err = -EINVAL;
> > +		ntfs_err(sb, "Failed to load $MFT.");
> > +		goto out;
> > +	}
> > +
> > +	sbi->mft.ni = ntfs_i(inode);
> > +
> > +	err = ni_load_all_mi(sbi->mft.ni);
> > +	if (!err)
> > +		err = log_replay(ni);
> 
> We only get error from log_replay if
> 
> > +
> > +	iput(inode);
> > +	sbi->mft.ni = NULL;
> > +
> > +	sync_blockdev(sb->s_bdev);
> > +	invalidate_bdev(sb->s_bdev);
> > +
> > +	/* reinit MFT */
> > +	if (sbi->flags & NTFS_FLAGS_NEED_REPLAY) {
> > +		err = 0;
> > +		goto out;
> > +	}
> > +
> > +	if (sb_rdonly(sb))
> > +		goto out;
> 
> we get here. Is this a intentional? Probably but I'm just checking.
> 

Hi Kari! Thanks for your attention on our patches.
This may be indeed quite entangled, here are the cases needed to be
covered:
1) !err && !(sbi->flags & NTFS_FLAGS_NEED_REPLAY) - ok
2) err && !(sbi->flags & NTFS_FLAGS_NEED_REPLAY) - no memory,
  io error, etc on prepare to replay stage
3) !err && (sbi->flags & NTFS_FLAGS_NEED_REPLAY) -
  journal is not empty, storage is readonly or unsupported log version
4) err && (sbi->flags & NTFS_FLAGS_NEED_REPLAY) - no memory, io error,
  etc while replaying
Distinction is that, cases 2/3 lead to mount error every time, while
case 4 permits read-only mount.

> > diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c
> 
> > +int ntfs_create_inode(struct inode *dir, struct dentry *dentry,
> > +		      const struct cpu_str *uni, umode_t mode, dev_t dev,
> > +		      const char *symname, u32 size, int excl,
> > +		      struct ntfs_fnd *fnd, struct inode **new_inode)
> > +{
> 
> > +#ifdef CONFIG_NTFS3_FS_POSIX_ACL
> 
> In Kconfig this is NTFS3_POSIX_ACL. This repeat every file.
> 

This is OK. You may refer to similar parts of ext4/btrfs sources as a
reference:
fs/ext4/Kconfig or fs/btrfs/Kconfig

> > +int ntfs_unlink_inode(struct inode *dir, const struct dentry *dentry)
> > +{
> > +	int err;
> > +	struct super_block *sb = dir->i_sb;
> > +	struct ntfs_sb_info *sbi = sb->s_fs_info;
> > +	struct inode *inode = d_inode(dentry);
> > +	struct ntfs_inode *ni = ntfs_i(inode);
> > +	const struct qstr *name = &dentry->d_name;
> > +	struct ntfs_inode *dir_ni = ntfs_i(dir);
> > +	struct ntfs_index *indx = &dir_ni->dir;
> > +	struct cpu_str *uni = NULL;
> > +	struct ATTR_FILE_NAME *fname;
> > +	u8 name_type;
> > +	struct ATTR_LIST_ENTRY *le;
> > +	struct MFT_REF ref;
> > +	bool is_dir = S_ISDIR(inode->i_mode);
> > +	struct INDEX_ROOT *dir_root;
> > +
> > +	dir_root = indx_get_root(indx, dir_ni, NULL, NULL);
> > +	if (!dir_root)
> > +		return -EINVAL;
> > +
> > +	ni_lock(ni);
> > +
> > +	if (is_dir && !dir_is_empty(inode)) {
> > +		err = -ENOTEMPTY;
> > +		goto out1;
> > +	}
> > +
> > +	if (ntfs_is_meta_file(sbi, inode->i_ino)) {
> > +		err = -EINVAL;
> > +		goto out1;
> > +	}
> > +
> > +	/* allocate PATH_MAX bytes */
> > +	uni = __getname();
> > +	if (!uni) {
> > +		err = -ENOMEM;
> > +		goto out1;
> > +	}
> > +
> > +	/* Convert input string to unicode */
> > +	err = ntfs_nls_to_utf16(sbi, name->name, name->len, uni, NTFS_NAME_LEN,
> > +				UTF16_HOST_ENDIAN);
> > +	if (err < 0)
> > +		goto out4;
> > +
> > +	le = NULL;
> 
> Little bit random place for this. Do we even need to NULL le.
> 

Thanks. Inititialization is moved to to the place where ni_fname_name
is being called.
> > +
> > +	/*mark rw ntfs as dirty. it will be cleared at umount*/
> > +	ntfs_set_state(sbi, NTFS_DIRTY_DIRTY);
> > +
> > +	/* find name in record */
> > +#ifdef NTFS3_64BIT_CLUSTER
> > +	ref.low = cpu_to_le32(dir->i_ino & 0xffffffff);
> > +	ref.high = cpu_to_le16(dir->i_ino >> 32);
> > +#else
> > +	ref.low = cpu_to_le32(dir->i_ino & 0xffffffff);
> > +	ref.high = 0;
> > +#endif
> > +	ref.seq = dir_ni->mi.mrec->seq;
> > +
> > +	fname = ni_fname_name(ni, uni, &ref, &le);
> 
> > diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c
> 
> > +#ifdef CONFIG_PRINTK
> > +/*
> > + * Trace warnings/notices/errors
> > + * Thanks Joe Perches <joe@xxxxxxxxxxx> for implementation
> > + */
> > +void ntfs_printk(const struct super_block *sb, const char *fmt, ...)
> > +{
> > +	struct va_format vaf;
> > +	va_list args;
> > +	int level;
> > +	struct ntfs_sb_info *sbi = sb->s_fs_info;
> > +
> > +	/*should we use different ratelimits for warnings/notices/errors? */
> > +	if (!___ratelimit(&sbi->msg_ratelimit, "ntfs3"))
> > +		return;
> > +
> > +	va_start(args, fmt);
> > +
> > +	level = printk_get_level(fmt);
> > +	vaf.fmt = printk_skip_level(fmt);
> > +	vaf.va = &args;
> > +	printk("%c%cntfs3: %s: %pV\n", KERN_SOH_ASCII, level, sb->s_id, &vaf);
> > +
> > +	va_end(args);
> > +}
> > +
> > +static char s_name_buf[512];
> > +static atomic_t s_name_buf_cnt = ATOMIC_INIT(1); // 1 means 'free s_name_buf'
> > +
> > +/* print warnings/notices/errors about inode using name or inode number */
> > +void ntfs_inode_printk(struct inode *inode, const char *fmt, ...)
> > +{
> > +	struct super_block *sb = inode->i_sb;
> > +	struct ntfs_sb_info *sbi = sb->s_fs_info;
> > +	char *name;
> > +	va_list args;
> > +	struct va_format vaf;
> > +	int level;
> > +
> > +	if (!___ratelimit(&sbi->msg_ratelimit, "ntfs3"))
> > +		return;
> > +
> > +	if (atomic_dec_and_test(&s_name_buf_cnt)) {
> > +		/* use static allocated buffer */
> > +		name = s_name_buf;
> > +	} else {
> > +		name = kmalloc(sizeof(s_name_buf), GFP_NOFS);
> > +	}
> > +
> > +	if (name) {
> > +		struct dentry *dentry = d_find_alias(inode);
> > +		const u32 name_len = ARRAY_SIZE(s_name_buf) - 1;
> > +
> > +		if (dentry) {
> > +			spin_lock(&dentry->d_lock);
> > +			snprintf(name, name_len, "%s", dentry->d_name.name);
> > +			spin_unlock(&dentry->d_lock);
> > +			dput(dentry);
> > +			name[name_len] = 0; /* to be sure*/
> > +		} else {
> > +			name[0] = 0;
> > +		}
> > +	}
> > +
> > +	va_start(args, fmt);
> > +
> > +	level = printk_get_level(fmt);
> > +	vaf.fmt = printk_skip_level(fmt);
> > +	vaf.va = &args;
> > +
> > +	printk("%c%cntfs3: %s: ino=%lx, \"%s\" %pV\n", KERN_SOH_ASCII, level,
> > +	       sb->s_id, inode->i_ino, name ? name : "", &vaf);
> > +
> > +	va_end(args);
> > +
> > +	atomic_inc(&s_name_buf_cnt);
> > +	if (name != s_name_buf)
> > +		kfree(name);
> > +}
> > +#endif
> 
> Should these be in debug.c or something? Atleast I do not see point why
> they are in super.c.
> 
Overall, the problem file name may be omitted, but it seems to be useful for
debug purposes. This code is placed into super.c because ntfs_printk is described there.

> > +static int __init init_ntfs_fs(void)
> > +{
> > +	int err;
> > +
> > +#ifdef NTFS3_INDEX_BINARY_SEARCH
> > +	pr_notice("ntfs3: +index binary search\n");
> > +#endif
> > +
> > +#ifdef NTFS3_CHECK_FREE_CLST
> > +	pr_notice("ntfs3: +check free clusters\n");
> > +#endif
> > +
> > +#if NTFS_LINK_MAX < 0xffff
> > +	pr_notice("ntfs3: max link count %u\n", NTFS_LINK_MAX);
> > +#endif
> > +
> > +#ifdef NTFS3_64BIT_CLUSTER
> > +	pr_notice("ntfs3: 64 bits per cluster\n");
> > +#else
> > +	pr_notice("ntfs3: 32 bits per cluster\n");
> > +#endif
> > +#ifdef CONFIG_NTFS3_LZX_XPRESS
> > +	pr_notice("ntfs3: read-only lzx/xpress compression included\n");
> > +#endif
> > +
> > +	ntfs_inode_cachep = kmem_cache_create(
> > +		"ntfs_inode_cache", sizeof(struct ntfs_inode), 0,
> > +		(SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD | SLAB_ACCOUNT),
> > +		init_once);
> > +	if (!ntfs_inode_cachep) {
> > +		err = -ENOMEM;
> > +		goto failed;
> > +	}
> > +
> > +	err = register_filesystem(&ntfs_fs_type);
> > +	if (!err)
> > +		return 0;
> 
> Do we need kmem_cache_destroy() here if err?
> 
Thanks, this will be fixed in v18.
> > +
> > +failed:
> > +	return err;
> > +}