Re: [PATCH v6 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings

[Mike Looijmans]

Wow, fast response, thanks.

Updated my dtschema, fixed the match name as requested and v7 is ready 
to go. I'm awaiting feedback from the iio people so I can send a new 
patch set.

M.


Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@xxxxxxxxxxxxxxxxx
W: www.topicproducts.com

Please consider the environment before printing this e-mail
On 20-01-2021 02:31, Rob Herring wrote:
> On Tue, Jan 19, 2021 at 01:46:21PM +0100, Mike Looijmans wrote:
> > This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> > the accelerometer part.
> >
> > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> >
> > ---
> >
> > Changes in v6:
> > I't been almost a year since the last commit, sorry...
> > Fixed the yaml errors
> > Add interrupt, vdd and vddio properties
> >
> > Changes in v5:
> > submit together with driver code as patch series
> >
> > Changes in v2:
> > convert to yaml format
> >
> >   .../bindings/iio/accel/bosch,bmi088.yaml      | 55 +++++++++++++++++++
> >   1 file changed, 55 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> > new file mode 100644
> > index 000000000000..459b9969fd12
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> > @@ -0,0 +1,55 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Bosch BMI088 IMU accelerometer part
> > +
> > +maintainers:
> > +  - Mike Looijmans <mike.looijmans@xxxxxxxx>
> > +
> > +description: |
> > +  Acceleration part of the IMU sensor with an SPI interface
> > +  Specifications about the sensor can be found at:
> > +    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - bosch,bmi088_accel
> bosch,bmi088-accel
>
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  vdd-supply: true
> > +
> > +  vddio-supply: true
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +    description: |
> > +      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
> > +      The first interrupt listed must be the one connected to the INT1 pin, the
> > +      second must be the one connected to the INT2 pin.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    spi {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      bmi088_accel@1 {
> > +        compatible = "bosch,bmi088_accel";
> > +        reg = <1>;
> > +        spi-max-frequency = <10000000>;
> > +        interrupt-parent = <&gpio6>;
> > +        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> > +      };
> > +    };
> > +...
> > --
> > 2.17.1

--
Mike Looijmans