Re: [PATCH] ARM: dts: stm32: Add STM32MP1 I2C6 SDA/SCL pinmux

[Alexandre TORGUE]

Hi,

On 12/23/20 12:07 PM, Jagan Teki wrote:
> Add SDA/SCL pinmux lines for I2C6 on STM32MP1.
>
> This support adds both in default and sleep states.
>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> ---
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index 20a59e8f7a33..2036c1d0d798 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -2018,6 +2018,23 @@ pins {
>   		};
>   	};
>   
> +	i2c6_pins_a: i2c6-0 {
> +		pins {
> +			pinmux = <STM32_PINMUX('Z', 6, AF2)>, /* I2C6_SCL */
> +				 <STM32_PINMUX('Z', 7, AF2)>; /* I2C6_SDA */
> +			bias-disable;
> +			drive-open-drain;
> +			slew-rate = <0>;
> +		};
> +	};
> +
> +	i2c6_sleep_pins_a: i2c6-sleep-0 {
> +		pins {
> +			pinmux = <STM32_PINMUX('Z', 6, ANALOG)>, /* I2C6_SCL */
> +				 <STM32_PINMUX('Z', 7, ANALOG)>; /* I2C6_SDA */
> +		};
> +	};
> +
>   	spi1_pins_a: spi1-0 {
>   		pins1 {
>   			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */

Applied on stm32-next.

Thanks.
Alex