Re: [PATCHv3 1/6] firmware: stratix10-svc: add COMMAND_AUTHENTICATE_BITSTREAM flag

[Moritz Fischer]

On Wed, Jan 27, 2021 at 07:05:41AM -0600, Richard Gong wrote:
> 
> Hi Greg,
> 
> Thanks for review!
> 
> On 1/27/21 6:04 AM, Greg KH wrote:
> > On Mon, Jan 25, 2021 at 02:56:23PM -0600, richard.gong@xxxxxxxxxxxxxxx wrote:
> > > From: Richard Gong <richard.gong@xxxxxxxxx>
> > > 
> > > Add COMMAND_AUTHENTICATE_BITSTREAM command flag for new added bitstream
> > > authentication feature. Authenticating a bitstream is to make sure a signed
> > > bitstream has the valid signatures.
> > > 
> > > Except for the actual configuration of the device, the bitstream
> > > authentication works the same way as FPGA configuration does. If the
> > > authentication passes, the signed bitstream will be programmed into QSPI
> > > flash memory and will be expected to boot without issues.
> > > 
> > > Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
> > > aligns with the firmware settings.
> > > 
> > > Signed-off-by: Richard Gong <richard.gong@xxxxxxxxx>
> > > ---
> > > v3: no change
> > > v2: new added
> > > ---
> > >   include/linux/firmware/intel/stratix10-svc-client.h | 11 ++++++++---
> > >   1 file changed, 8 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
> > > index ebc2956..7ada1f2 100644
> > > --- a/include/linux/firmware/intel/stratix10-svc-client.h
> > > +++ b/include/linux/firmware/intel/stratix10-svc-client.h
> > > @@ -51,12 +51,17 @@
> > >   #define SVC_STATUS_NO_SUPPORT		6
> > >   /*
> > > - * Flag bit for COMMAND_RECONFIG
> > > + * Flag for COMMAND_RECONFIG, in bit number
> > >    *
> > >    * COMMAND_RECONFIG_FLAG_PARTIAL:
> > > - * Set to FPGA configuration type (full or partial).
> > > + * Set for partial FPGA configuration.
> > > + *
> > > + * COMMAND_AUTHENTICATE_BITSTREAM:
> > > + * Set for bitstream authentication, which makes sure a signed bitstream
> > > + * has valid signatures before committing it to QSPI flash memory.
> > >    */
> > > -#define COMMAND_RECONFIG_FLAG_PARTIAL	1
> > > +#define COMMAND_RECONFIG_FLAG_PARTIAL	0
> > 
> > So is this a bugfix, changing this value to the correct one?
> 
> Yes, it is a bug fix.
Wat? This is a change in interface spec with the firmware. I thought the
whole point of the firmware version SVC call was to prevent breaking old
firmware?

Didn't we discuss this earlier?

> > 
> > If so, shouldn't this be a stand-alone patch and get backported to
> > stable kernel releases?
> 
> Sure, I will make change and submit again as a standalone patch.
> 
> > 
> > If not, then no one uses this flag today?
> > 
> > thanks,
> > 
> > greg k-h
> > 
> Regards,
> Richard

- Moritz