[PATCH 18/24] perf daemon: Add man page for perf-daemon

From: Jiri Olsa
Date: Sat Jan 30 2021 - 18:52:40 EST


Adding man page for perf-daemon usage.

Signed-off-by: Jiri Olsa <jolsa@xxxxxxxxxx>
---
tools/perf/Documentation/perf-config.txt | 14 ++
tools/perf/Documentation/perf-daemon.txt | 187 +++++++++++++++++++++++
2 files changed, 201 insertions(+)

diff --git a/tools/perf/Documentation/perf-config.txt b/tools/perf/Documentation/perf-config.txt
index c3ce48f1b379..153bde14bbe0 100644
--- a/tools/perf/Documentation/perf-config.txt
+++ b/tools/perf/Documentation/perf-config.txt
@@ -703,6 +703,20 @@ auxtrace.*::
If the directory does not exist or has the wrong file type,
the current directory is used.

+daemon.*::
+
+ daemon.base::
+ Base path for daemon data. All sessions data are stored under
+ this path.
+
+session-<NAME>.*::
+
+ session-<NAME>.run::
+
+ Defines new record session for daemon. The value is record's
+ command line without the 'record' keyword.
+
+
SEE ALSO
--------
linkperf:perf[1]
diff --git a/tools/perf/Documentation/perf-daemon.txt b/tools/perf/Documentation/perf-daemon.txt
index e69de29bb2d1..b0e1015476c2 100644
--- a/tools/perf/Documentation/perf-daemon.txt
+++ b/tools/perf/Documentation/perf-daemon.txt
@@ -0,0 +1,187 @@
+perf-daemon(1)
+==============
+
+NAME
+----
+perf-daemon - Run record sessions on background
+
+SYNOPSIS
+--------
+[verse]
+'perf daemon'
+'perf daemon' [<options>]
+'perf daemon start' [<options>]
+'perf daemon stop' [<options>]
+'perf daemon signal' [<options>]
+'perf daemon ping' [<options>]
+
+
+DESCRIPTION
+-----------
+This command allows to run simple daemon process that starts and
+monitors configured record sessions.
+
+Each session represents one perf record process started with
+control setup (with perf record --control.. options).
+
+These sessions are configured through config file, see CONFIG FILE
+section with EXAMPLES.
+
+
+OPTIONS
+-------
+--config=<PATH>::
+ Config file path, if not perf will check system and default
+ locations (/etc/perfconfig, $HOME/.perfconfig).
+
+-v::
+--verbose::
+ Be more verbose.
+
+
+All generic options are available also under commands.
+
+
+START COMMAND
+-------------
+The start command creates the daemon process.
+
+-f::
+--foreground::
+ Do not put the process in background.
+
+
+STOP COMMAND
+------------
+The stop command stops all the session and the daemon process.
+
+
+SIGNAL COMMAND
+--------------
+The signal command sends signal to configured sessions.
+
+--session::
+ Send signal to specific session.
+
+
+PING COMMAND
+------------
+The ping command sends control ping to configured sessions.
+
+--session::
+ Send ping to specific session.
+
+
+CONFIG FILE
+-----------
+The daemon is configured within standard perf config file by
+following new variables:
+
+daemon.base:
+ Base path for daemon data. All sessions data are
+ stored under this path.
+
+session-<NAME>.run:
+ Defines new record session. The value is record's command
+ line without the 'record' keyword.
+
+Each perf record session is run in daemon.base/<NAME> directory.
+
+
+EXAMPLES
+--------
+Example with 2 record sessions:
+
+ # cat ~/.perfconfig
+ [daemon]
+ base=/opt/perfdata
+
+ [session-cycles]
+ run = -m 10M -e cycles --overwrite --switch-output -a
+
+ [session-sched]
+ run = -m 20M -e sched:* --overwrite --switch-output -a
+
+
+Starting the daemon:
+
+ # perf daemon start
+
+
+Check sessions:
+
+ # perf daemon
+ [603349:daemon] base: /opt/perfdata
+ [603350:cycles] perf record -m 10M -e cycles --overwrite --switch-output -a
+ [603351:sched] perf record -m 20M -e sched:* --overwrite --switch-output -a
+
+First line is daemon process info with configured daemon base.
+
+
+Check sessions with more info:
+
+ # perf daemon -v
+ [603349:daemon] base: /opt/perfdata
+ output: /opt/perfdata/output
+ lock: /opt/perfdata/lock
+ up: 1 minutes
+ [603350:cycles] perf record -m 10M -e cycles --overwrite --switch-output -a
+ base: /opt/perfdata/session-cycles
+ output: /opt/perfdata/session-cycles/output
+ control: /opt/perfdata/session-cycles/control
+ ack: /opt/perfdata/session-cycles/ack
+ up: 1 minutes
+ [603351:sched] perf record -m 20M -e sched:* --overwrite --switch-output -a
+ base: /opt/perfdata/session-sched
+ output: /opt/perfdata/session-sched/output
+ control: /opt/perfdata/session-sched/control
+ ack: /opt/perfdata/session-sched/ack
+ up: 1 minutes
+
+The 'base' path is daemon/session base.
+The 'lock' file is daemon's lock file guarding that no other
+daemon is running on top of the base.
+The 'output' file is perf record output for specific session.
+The 'control' and 'ack' files are perf control files.
+The 'up' number shows minutes daemon/session is running.
+
+
+Make sure control session is online:
+
+ # perf daemon ping
+ OK cycles
+ OK sched
+
+
+Send USR2 signal to session 'cycles' to generate perf.data file:
+
+ # perf daemon signal --session cycles
+ signal 12 sent to session 'cycles [603452]'
+
+ # tail -2 /opt/perfdata/session-cycles/output
+ [ perf record: dump data: Woken up 1 times ]
+ [ perf record: Dump perf.data.2020123017013149 ]
+
+
+Send USR2 signal to all sessions:
+
+ # perf daemon signal
+ signal 12 sent to session 'cycles [603452]'
+ signal 12 sent to session 'sched [603453]'
+
+ # tail -2 /opt/perfdata/session-cycles/output
+ [ perf record: dump data: Woken up 1 times ]
+ [ perf record: Dump perf.data.2020123017024689 ]
+ # tail -2 /opt/perfdata/session-sched/output
+ [ perf record: dump data: Woken up 1 times ]
+ [ perf record: Dump perf.data.2020123017024713 ]
+
+
+Stop daemon:
+
+ # perf daemon stop
+
+
+SEE ALSO
+--------
+linkperf:perf-record[1], linkperf:perf-config[1]
--
2.29.2