[PATCH 19/20] ata: pata_optidma: Fix a function misnaming, a formatting issue and a missing description

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/ata/pata_optidma.c:298: warning: expecting prototype for optidma_make_bits(). Prototype was for optidma_make_bits43() instead
 drivers/ata/pata_optidma.c:319: warning: Function parameter or member 'r_failed' not described in 'optidma_set_mode'
 drivers/ata/pata_optidma.c:361: warning: Function parameter or member 'pdev' not described in 'optiplus_with_udma'

Cc: Jens Axboe <axboe@xxxxxxxxx>
Cc: linux-ide@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 drivers/ata/pata_optidma.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index fbcf0af34924d..f6278d9de3486 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -287,7 +287,7 @@ static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	optidma_make_bits	-	PCI setup helper
+ *	optidma_make_bits43	-	PCI setup helper
  *	@adev: ATA device
  *
  *	Turn the ATA device setup into PCI configuration bits
@@ -309,6 +309,7 @@ static u8 optidma_make_bits43(struct ata_device *adev)
 /**
  *	optidma_set_mode	-	mode setup
  *	@link: link to set up
+ *	@r_failed: out parameter for failed device
  *
  *	Use the standard setup to tune the chipset and then finalise the
  *	configuration by writing the nibble of extra bits of data into
@@ -354,7 +355,7 @@ static struct ata_port_operations optiplus_port_ops = {
 
 /**
  *	optiplus_with_udma	-	Look for UDMA capable setup
- *	@pdev; ATA controller
+ *	@pdev: ATA controller
  */
 
 static int optiplus_with_udma(struct pci_dev *pdev)
-- 
2.25.1