Re: [PATCH RFC 1/4] firmware: Add the support for ZSTD-compressed firmware files
From: Takashi Iwai
Date: Wed Feb 17 2021 - 08:31:08 EST
On Wed, 17 Feb 2021 14:16:44 +0100,
Luis Chamberlain wrote:
>
> On Wed, Jan 27, 2021 at 04:49:36PM +0100, Takashi Iwai wrote:
> > Due to the popular demands on ZSTD, here is a patch to add a support
> > of ZSTD-compressed firmware files via the direct firmware loader.
> > It's just like XZ-compressed file support, providing a decompressor
> > with ZSTD. Since ZSTD API can give the decompression size beforehand,
> > the code is even simpler than XZ.
> >
> > Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
> > ---
> > drivers/base/firmware_loader/Kconfig | 21 ++++++--
> > drivers/base/firmware_loader/main.c | 74 ++++++++++++++++++++++++++--
> > 2 files changed, 87 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/base/firmware_loader/Kconfig b/drivers/base/firmware_loader/Kconfig
> > index 5b24f3959255..f5307978927c 100644
> > --- a/drivers/base/firmware_loader/Kconfig
> > +++ b/drivers/base/firmware_loader/Kconfig
> > @@ -157,17 +157,28 @@ config FW_LOADER_USER_HELPER_FALLBACK
> >
> > config FW_LOADER_COMPRESS
> > bool "Enable compressed firmware support"
> > - select FW_LOADER_PAGED_BUF
> > - select XZ_DEC
> > help
> > This option enables the support for loading compressed firmware
> > files. The caller of firmware API receives the decompressed file
> > content. The compressed file is loaded as a fallback, only after
> > loading the raw file failed at first.
> >
> > - Currently only XZ-compressed files are supported, and they have to
> > - be compressed with either none or crc32 integrity check type (pass
> > - "-C crc32" option to xz command).
> > +if FW_LOADER_COMPRESS
> > +config FW_LOADER_COMPRESS_XZ
> > + bool "Enable XZ-compressed firmware support"
> > + select FW_LOADER_PAGED_BUF
> > + select XZ_DEC
> > + help
> > + This option adds the support for XZ-compressed files.
> > + The files have to be compressed with either none or crc32
> > + integrity check type (pass "-C crc32" option to xz command).
> > +
> > +config FW_LOADER_COMPRESS_ZSTD
> > + bool "Enable ZSTD-compressed firmware support"
> > + select ZSTD_DECOMPRESS
> > + help
> > + This option adds the support for ZSTD-compressed files.
> > +endif # FW_LOADER_COMPRESS
> >
> > config FW_CACHE
> > bool "Enable firmware caching during suspend"
> > diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c
> > index 78355095e00d..71332ed4959d 100644
> > --- a/drivers/base/firmware_loader/main.c
> > +++ b/drivers/base/firmware_loader/main.c
> > @@ -34,6 +34,7 @@
> > #include <linux/syscore_ops.h>
> > #include <linux/reboot.h>
> > #include <linux/security.h>
> > +#include <linux/zstd.h>
> > #include <linux/xz.h>
> >
> > #include <generated/utsrelease.h>
> > @@ -362,10 +363,72 @@ int fw_map_paged_buf(struct fw_priv *fw_priv)
> > }
> > #endif
> >
> > +/*
> > + * ZSTD-compressed firmware support
> > + */
> > +#ifdef CONFIG_FW_LOADER_COMPRESS_ZSTD
> > +static int fw_decompress_zstd(struct device *dev, struct fw_priv *fw_priv,
> > + size_t in_size, const void *in_buffer)
> > +{
> > + size_t len, out_size, workspace_size;
> > + void *workspace, *out_buf;
> > + ZSTD_DCtx *ctx;
> > + int err;
> > +
> > + if (fw_priv->data) {
> > + out_size = fw_priv->allocated_size;
> > + out_buf = fw_priv->data;
> > + } else {
> > + out_size = ZSTD_findDecompressedSize(in_buffer, in_size);
> > + if (out_size == ZSTD_CONTENTSIZE_UNKNOWN ||
> > + out_size == ZSTD_CONTENTSIZE_ERROR) {
> > + dev_dbg(dev, "%s: invalid decompression size\n", __func__);
> > + return -EINVAL;
> > + }
> > + out_buf = vzalloc(out_size);
> > + if (!out_buf)
> > + return -ENOMEM;
> > + }
> > +
> > + workspace_size = ZSTD_DCtxWorkspaceBound();
> > + workspace = kvzalloc(workspace_size, GFP_KERNEL);
> > + if (!workspace) {
> > + err = -ENOMEM;
> > + goto error;
> > + }
> > +
> > + ctx = ZSTD_initDCtx(workspace, workspace_size);
> > + if (!ctx) {
> > + dev_dbg(dev, "%s: failed to initialize context\n", __func__);
> > + err = -EINVAL;
> > + goto error;
> > + }
> > +
> > + len = ZSTD_decompressDCtx(ctx, out_buf, out_size, in_buffer, in_size);
> > + if (ZSTD_isError(len)) {
> > + dev_dbg(dev, "%s: failed to decompress: %d\n", __func__,
> > + ZSTD_getErrorCode(len));
> > + err = -EINVAL;
> > + goto error;
> > + }
> > +
> > + fw_priv->size = len;
> > + if (!fw_priv->data)
> > + fw_priv->data = out_buf;
> > + err = 0;
> > +
> > + error:
> > + kvfree(workspace);
> > + if (!fw_priv->data)
> > + vfree(out_buf);
> > + return err;
> > +}
> > +#endif /* CONFIG_FW_LOADER_COMPRESS_ZSTD */
> > +
> > /*
> > * XZ-compressed firmware support
> > */
> > -#ifdef CONFIG_FW_LOADER_COMPRESS
> > +#ifdef CONFIG_FW_LOADER_COMPRESS_XZ
> > /* show an error and return the standard error code */
> > static int fw_decompress_xz_error(struct device *dev, enum xz_ret xz_ret)
> > {
> > @@ -459,7 +522,7 @@ static int fw_decompress_xz(struct device *dev, struct fw_priv *fw_priv,
> > else
> > return fw_decompress_xz_pages(dev, fw_priv, in_size, in_buffer);
> > }
> > -#endif /* CONFIG_FW_LOADER_COMPRESS */
> > +#endif /* CONFIG_FW_LOADER_COMPRESS_XZ */
> >
> > /* direct firmware loading support */
> > static char fw_path_para[256];
> > @@ -814,7 +877,12 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
> > if (!(opt_flags & FW_OPT_PARTIAL))
> > nondirect = true;
> >
> > -#ifdef CONFIG_FW_LOADER_COMPRESS
> > +#ifdef CONFIG_FW_LOADER_COMPRESS_ZSTD
> > + if (ret == -ENOENT && nondirect)
> > + ret = fw_get_filesystem_firmware(device, fw->priv, ".zst",
> > + fw_decompress_zstd);
> > +#endif
> > +#ifdef CONFIG_FW_LOADER_COMPRESS_XZ
> > if (ret == -ENOENT && nondirect)
> > ret = fw_get_filesystem_firmware(device, fw->priv, ".xz",
> > fw_decompress_xz);
>
> Since this is growing, it would be nicer if we avoid the #ifdef mess and
> simply have code iterate over supported compressions, and this is
> observed here in one line.
If it ever grows further, yeah, but I guess this won't happen so
often :) As of now, I chose the open-code as there are only two.
thanks,
Takashi