[PATCH 2/3] dt-bindings: phy: brcm,ns-usb2-phy: bind single CRU reg

[Rafał Miłecki]

From: Rafał Miłecki <rafal@xxxxxxxxxx>

The old binding was using whole DMU space. It was an overkill. DMU is a
big block which contains e.g. CRU which contains e.g. PLLs, PHY, pinctrl
and thermal blocks.

Rework the binding to directly use a single CRU register that controls
USB 2.0 PHY. It's still required to reference CRU generic clkset
register so add a syscon for that.

For a full DMU & CRU description see arch/arm/boot/dts/bcm5301x.dtsi .

The old binding is deprecated now.

Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
This has been verified using dt_binding_check

I'd really like to get Rob's ack to make sure I don't do anything stupid

It's a reworked version of my abonded 2019 patch:
[PATCH V2 1/2] dt-bindings: bcm-ns-usb2-phy: rework binding to use CRU syscon
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20190108123907.19816-1-zajec5@xxxxxxxxx/
---
 .../bindings/phy/brcm,ns-usb2-phy.yaml        | 46 +++++++++++++++----
 1 file changed, 36 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
index b8b683ce8fa9..8e056d4d205a 100644
--- a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
@@ -16,11 +16,20 @@ properties:
     const: brcm,ns-usb2-phy
 
   reg:
-    maxItems: 1
-    description: DMU (Device Management Unit) address range
+    anyOf:
+      - maxItems: 1
+        description: PHY control register
+      - maxItems: 1
+        description: DMU (Device Management Unit) address range
+        deprecated: true
 
   reg-names:
     const: dmu
+    deprecated: true
+
+  brcm,syscon-clkset:
+    description: phandle to syscon for clkset register
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   clocks:
     maxItems: 1
@@ -34,22 +43,39 @@ properties:
 
 required:
   - reg
-  - reg-names
   - clocks
   - clock-names
   - "#phy-cells"
 
+oneOf:
+  - required:
+      - brcm,syscon-clkset
+  - required:
+      - reg-names
+
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/bcm-nsp.h>
 
-    usb2-phy@1800c000 {
-        compatible = "brcm,ns-usb2-phy";
-        reg = <0x1800c000 0x1000>;
-        reg-names = "dmu";
-        clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-        clock-names = "phy-ref-clk";
-        #phy-cells = <0>;
+    cru-bus@1800c100 {
+        compatible = "simple-bus";
+        ranges = <0 0x1800c100 0x1a4>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        usb2-phy@64 {
+            compatible = "brcm,ns-usb2-phy";
+            reg = <0x64 0x4>;
+            brcm,syscon-clkset = <&clkset>;
+            clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+            clock-names = "phy-ref-clk";
+            #phy-cells = <0>;
+        };
+
+        clkset: syscon@80 {
+            compatible = "brcm,cru-clkset", "syscon";
+            reg = <0x80 0x4>;
+        };
     };
-- 
2.26.2