[PATCH 5.11 371/775] scsi: isci: Pass gfp_t flags in isci_port_link_up()

[Greg Kroah-Hartman]

From: Ahmed S. Darwish <a.darwish@xxxxxxxxxxxxx>

[ Upstream commit 5ce7902902adb8d154d67ba494f06daa29360ef0 ]

Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

libsas sas_notify_port_event() is called from isci_port_link_up().  Below
is the context analysis for all of its call chains:

host.c: isci_host_init()                                        (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_initialize(), atomic                        (*)
    -> port_config.c: sci_port_configuration_agent_initialize()
      -> sci_mpc_agent_validate_phy_configuration()
        -> port.c: sci_port_add_phy()
          -> sci_port_general_link_up_handler()
            -> sci_port_activate_phy()
              -> isci_port_link_up()

port_config.c: apc_agent_timeout(), atomic, timer callback      (*)
  -> sci_apc_agent_configure_ports()
    -> port.c: sci_port_add_phy()
      -> sci_port_general_link_up_handler()
        -> sci_port_activate_phy()
          -> isci_port_link_up()

phy.c: enter SCI state: *SCI_PHY_SUB_FINAL*                     # Cont. from [1]
  -> phy.c: sci_phy_starting_final_substate_enter()
    -> phy.c: sci_change_state(SCI_PHY_READY)
      -> enter SCI state: *SCI_PHY_READY*
        -> phy.c: sci_phy_ready_state_enter()
          -> host.c: sci_controller_link_up()
            -> .link_up_handler()
            == port_config.c: sci_apc_agent_link_up()
              -> port.c: sci_port_link_up()
                -> (continue at [A])
            == port_config.c: sci_mpc_agent_link_up()
	      -> port.c: sci_port_link_up()
                -> (continue at [A])

port_config.c: mpc_agent_timeout(), atomic, timer callback      (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> ->link_up_handler()
  == port_config.c: sci_apc_agent_link_up()
    -> port.c: sci_port_link_up()
      -> (continue at [A])
  == port_config.c: sci_mpc_agent_link_up()
    -> port.c: sci_port_link_up()
      -> (continue at [A])

[A] port.c: sci_port_link_up()
  -> sci_port_activate_phy()
    -> isci_port_link_up()
  -> sci_port_general_link_up_handler()
    -> sci_port_activate_phy()
      -> isci_port_link_up()

[1] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL*
-----------------------------------------------------------

host.c: power_control_timeout(), atomic, timer callback         (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> phy.c: sci_phy_consume_power_handler()
    -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL)

host.c: sci_controller_error_handler(): atomic, irq handler     (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
  -> sci_controller_process_completions()
    -> sci_controller_unsolicited_frame()
      -> phy.c: sci_phy_frame_handler()
        -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER)
          -> sci_phy_starting_await_sas_power_substate_enter()
            -> host.c: sci_controller_power_control_queue_insert()
              -> phy.c: sci_phy_consume_power_handler()
                -> sci_change_state(SCI_PHY_SUB_FINAL)
        -> sci_change_state(SCI_PHY_SUB_FINAL)
    -> sci_controller_event_completion()
      -> phy.c: sci_phy_event_handler()
        -> sci_phy_start_sata_link_training()
          -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER)
            -> sci_phy_starting_await_sata_power_substate_enter
              -> host.c: sci_controller_power_control_queue_insert()
                -> phy.c: sci_phy_consume_power_handler()
                  -> sci_change_state(SCI_PHY_SUB_FINAL)

As can be seen from the "(*)" markers above, all the call-chains are
atomic.  Pass GFP_ATOMIC to libsas port event notifier.

Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide
which memory allocation type to use.  This was only partially correct, as
it fails to choose the correct GFP flags when just preemption or interrupts
are disabled. Such buggy code paths are marked with "(@)" in the call
chains above.

Link: https://lore.kernel.org/r/20210118100955.1761652-7-a.darwish@xxxxxxxxxxxxx
Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost")
Cc: Artur Paszkiewicz <artur.paszkiewicz@xxxxxxxxx>
Reviewed-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Ahmed S. Darwish <a.darwish@xxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/isci/port.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index a3c58718c2600..10136ae466e20 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -223,7 +223,8 @@ static void isci_port_link_up(struct isci_host *isci_host,
 	/* Notify libsas that we have an address frame, if indeed
 	 * we've found an SSP, SMP, or STP target */
 	if (success)
-		sas_notify_port_event(&iphy->sas_phy, PORTE_BYTES_DMAED);
+		sas_notify_port_event_gfp(&iphy->sas_phy,
+					  PORTE_BYTES_DMAED, GFP_ATOMIC);
 }
 
 
-- 
2.27.0