[PATCH 06/44] tty: isicom, remove this orphan
From: Jiri Slaby
Date: Tue Mar 02 2021 - 03:24:11 EST
The Isicom driver was orphaned by commit d86b3001a1a6 (MAINTAINERS:
orphan isicom) 10 years ago. Noone stepped up to take care of them and
to fix all the issues the driver has.
So it's time to drop the driver with all its traces.
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
Documentation/admin-guide/devices.txt | 2 +-
Documentation/process/magic-number.rst | 1 -
.../it_IT/process/magic-number.rst | 1 -
.../zh_CN/process/magic-number.rst | 1 -
MAINTAINERS | 5 -
drivers/tty/Kconfig | 10 -
drivers/tty/Makefile | 1 -
drivers/tty/isicom.c | 1699 -----------------
include/linux/isicom.h | 85 -
9 files changed, 1 insertion(+), 1804 deletions(-)
delete mode 100644 drivers/tty/isicom.c
delete mode 100644 include/linux/isicom.h
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index b5bd9d46e031..ef41f77cb979 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -289,7 +289,7 @@
152 = /dev/kpoll Kernel Poll Driver
153 = /dev/mergemem Memory merge device
154 = /dev/pmu Macintosh PowerBook power manager
- 155 = /dev/isictl MultiTech ISICom serial control
+ 155 =
156 = /dev/lcd Front panel LCD display
157 = /dev/ac Applicom Intl Profibus card
158 = /dev/nwbutton Netwinder external button
diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst
index d4a30c09bd03..c36f21eecefb 100644
--- a/Documentation/process/magic-number.rst
+++ b/Documentation/process/magic-number.rst
@@ -77,7 +77,6 @@ DB_MAGIC 0x4442 fc_info ``drivers/net/ip
DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c``
FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h``
FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c``
-ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst
index 0df2e7e32cd8..440087f9f402 100644
--- a/Documentation/translations/it_IT/process/magic-number.rst
+++ b/Documentation/translations/it_IT/process/magic-number.rst
@@ -83,7 +83,6 @@ DB_MAGIC 0x4442 fc_info ``drivers/net/ip
DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c``
FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h``
FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c``
-ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst
index 82d62f6a4406..e91bec4ec156 100644
--- a/Documentation/translations/zh_CN/process/magic-number.rst
+++ b/Documentation/translations/zh_CN/process/magic-number.rst
@@ -66,7 +66,6 @@ DB_MAGIC 0x4442 fc_info ``drivers/net/ip
DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c``
FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h``
FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c``
-ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
diff --git a/MAINTAINERS b/MAINTAINERS
index fd45767da24c..549145c5fb0b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12225,11 +12225,6 @@ F: drivers/mux/
F: include/dt-bindings/mux/
F: include/linux/mux/
-MULTITECH MULTIPORT CARD (ISICOM)
-S: Orphan
-F: drivers/tty/isicom.c
-F: include/linux/isicom.h
-
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Bin Liu <b-liu@xxxxxx>
L: linux-usb@xxxxxxxxxxxxxxx
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 397523a8095e..0031aa8f8b16 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -238,16 +238,6 @@ config SYNCLINK_GT
synchronous and asynchronous serial adapters
manufactured by Microgate Systems, Ltd. (www.microgate.com)
-config ISI
- tristate "Multi-Tech multiport card support"
- depends on SERIAL_NONSTANDARD && PCI
- select FW_LOADER
- help
- This is a driver for the Multi-Tech cards which provide several
- serial ports. The driver is experimental and can currently only be
- built as a module. The module will be called isicom.
- If you want to do that, choose M here.
-
config N_HDLC
tristate "HDLC line discipline support"
depends on SERIAL_NONSTANDARD
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 94eb2bf75763..a34055bc8b7a 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_SERIAL_DEV_BUS) += serdev/
# tty drivers
obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
-obj-$(CONFIG_ISI) += isicom.o
obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
obj-$(CONFIG_NOZOMI) += nozomi.o
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
deleted file mode 100644
index 3b2f9fb01aa0..000000000000
--- a/drivers/tty/isicom.c
+++ /dev/null
@@ -1,1699 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Original driver code supplied by Multi-Tech
- *
- * Changes
- * 1/9/98 alan@xxxxxxxxxxxxxxxxxxx
- * Merge to 2.0.x kernel tree
- * Obtain and use official major/minors
- * Loader switched to a misc device
- * (fixed range check bug as a side effect)
- * Printk clean up
- * 9/12/98 alan@xxxxxxxxxxxxxxxxxxx
- * Rough port to 2.1.x
- *
- * 10/6/99 sameer Merged the ISA and PCI drivers to
- * a new unified driver.
- *
- * 3/9/99 sameer Added support for ISI4616 cards.
- *
- * 16/9/99 sameer We do not force RTS low anymore.
- * This is to prevent the firmware
- * from getting confused.
- *
- * 26/10/99 sameer Cosmetic changes:The driver now
- * dumps the Port Count information
- * along with I/O address and IRQ.
- *
- * 13/12/99 sameer Fixed the problem with IRQ sharing.
- *
- * 10/5/00 sameer Fixed isicom_shutdown_board()
- * to not lower DTR on all the ports
- * when the last port on the card is
- * closed.
- *
- * 10/5/00 sameer Signal mask setup command added
- * to isicom_setup_port and
- * isicom_shutdown_port.
- *
- * 24/5/00 sameer The driver is now SMP aware.
- *
- *
- * 27/11/00 Vinayak P Risbud Fixed the Driver Crash Problem
- *
- *
- * 03/01/01 anil .s Added support for resetting the
- * internal modems on ISI cards.
- *
- * 08/02/01 anil .s Upgraded the driver for kernel
- * 2.4.x
- *
- * 11/04/01 Kevin Fixed firmware load problem with
- * ISIHP-4X card
- *
- * 30/04/01 anil .s Fixed the remote login through
- * ISI port problem. Now the link
- * does not go down before password
- * prompt.
- *
- * 03/05/01 anil .s Fixed the problem with IRQ sharing
- * among ISI-PCI cards.
- *
- * 03/05/01 anil .s Added support to display the version
- * info during insmod as well as module
- * listing by lsmod.
- *
- * 10/05/01 anil .s Done the modifications to the source
- * file and Install script so that the
- * same installation can be used for
- * 2.2.x and 2.4.x kernel.
- *
- * 06/06/01 anil .s Now we drop both dtr and rts during
- * shutdown_port as well as raise them
- * during isicom_config_port.
- *
- * 09/06/01 acme@xxxxxxxxxxxxxxxx use capable, not suser, do
- * restore_flags on failure in
- * isicom_send_break, verify put_user
- * result
- *
- * 11/02/03 ranjeeth Added support for 230 Kbps and 460 Kbps
- * Baud index extended to 21
- *
- * 20/03/03 ranjeeth Made to work for Linux Advanced server.
- * Taken care of license warning.
- *
- * 10/12/03 Ravindra Made to work for Fedora Core 1 of
- * Red Hat Distribution
- *
- * 06/01/05 Alan Cox Merged the ISI and base kernel strands
- * into a single 2.6 driver
- *
- * ***********************************************************
- *
- * To use this driver you also need the support package. You
- * can find this in RPM format on
- * ftp://ftp.linux.org.uk/pub/linux/alan
- *
- * You can find the original tools for this direct from Multitech
- * ftp://ftp.multitech.com/ISI-Cards/
- *
- * Having installed the cards the module options (/etc/modprobe.d/)
- *
- * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4
- *
- * Omit those entries for boards you don't have installed.
- *
- * TODO
- * Merge testing
- * 64-bit verification
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/firmware.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/termios.h>
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <linux/pci.h>
-
-#include <linux/isicom.h>
-
-#define InterruptTheCard(base) outw(0, (base) + 0xc)
-#define ClearInterrupt(base) inw((base) + 0x0a)
-
-#ifdef DEBUG
-#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
-#else
-#define isicom_paranoia_check(a, b, c) 0
-#endif
-
-static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
-static void isicom_remove(struct pci_dev *);
-
-static const struct pci_device_id isicom_pci_tbl[] = {
- { PCI_DEVICE(VENDOR_ID, 0x2028) },
- { PCI_DEVICE(VENDOR_ID, 0x2051) },
- { PCI_DEVICE(VENDOR_ID, 0x2052) },
- { PCI_DEVICE(VENDOR_ID, 0x2053) },
- { PCI_DEVICE(VENDOR_ID, 0x2054) },
- { PCI_DEVICE(VENDOR_ID, 0x2055) },
- { PCI_DEVICE(VENDOR_ID, 0x2056) },
- { PCI_DEVICE(VENDOR_ID, 0x2057) },
- { PCI_DEVICE(VENDOR_ID, 0x2058) },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, isicom_pci_tbl);
-
-static struct pci_driver isicom_driver = {
- .name = "isicom",
- .id_table = isicom_pci_tbl,
- .probe = isicom_probe,
- .remove = isicom_remove
-};
-
-static int prev_card = 3; /* start servicing isi_card[0] */
-static struct tty_driver *isicom_normal;
-
-static void isicom_tx(struct timer_list *unused);
-static void isicom_start(struct tty_struct *tty);
-
-static DEFINE_TIMER(tx, isicom_tx);
-
-/* baud index mappings from linux defns to isi */
-
-static signed char linuxb_to_isib[] = {
- -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21
-};
-
-struct isi_board {
- unsigned long base;
- int irq;
- unsigned char port_count;
- unsigned short status;
- unsigned short port_status; /* each bit for each port */
- unsigned short shift_count;
- struct isi_port *ports;
- signed char count;
- spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */
- unsigned long flags;
- unsigned int index;
-};
-
-struct isi_port {
- unsigned short magic;
- struct tty_port port;
- u16 channel;
- u16 status;
- struct isi_board *card;
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
-};
-
-static struct isi_board isi_card[BOARD_COUNT];
-static struct isi_port isi_ports[PORT_COUNT];
-
-/*
- * Locking functions for card level locking. We need to own both
- * the kernel lock for the card and have the card in a position that
- * it wants to talk.
- */
-
-static int WaitTillCardIsFree(unsigned long base)
-{
- unsigned int count = 0;
-
- while (!(inw(base + 0xe) & 0x1) && count++ < 100)
- mdelay(1);
-
- return !(inw(base + 0xe) & 0x1);
-}
-
-static int lock_card(struct isi_board *card)
-{
- unsigned long base = card->base;
- unsigned int retries, a;
-
- for (retries = 0; retries < 10; retries++) {
- spin_lock_irqsave(&card->card_lock, card->flags);
- for (a = 0; a < 10; a++) {
- if (inw(base + 0xe) & 0x1)
- return 1;
- udelay(10);
- }
- spin_unlock_irqrestore(&card->card_lock, card->flags);
- msleep(10);
- }
- pr_warn("Failed to lock Card (0x%lx)\n", card->base);
-
- return 0; /* Failed to acquire the card! */
-}
-
-static void unlock_card(struct isi_board *card)
-{
- spin_unlock_irqrestore(&card->card_lock, card->flags);
-}
-
-/*
- * ISI Card specific ops ...
- */
-
-/* card->lock HAS to be held */
-static void raise_dtr(struct isi_port *port)
-{
- struct isi_board *card = port->card;
- unsigned long base = card->base;
- u16 channel = port->channel;
-
- if (WaitTillCardIsFree(base))
- return;
-
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw(0x0504, base);
- InterruptTheCard(base);
- port->status |= ISI_DTR;
-}
-
-/* card->lock HAS to be held */
-static void drop_dtr(struct isi_port *port)
-{
- struct isi_board *card = port->card;
- unsigned long base = card->base;
- u16 channel = port->channel;
-
- if (WaitTillCardIsFree(base))
- return;
-
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw(0x0404, base);
- InterruptTheCard(base);
- port->status &= ~ISI_DTR;
-}
-
-/* card->lock HAS to be held */
-static inline void raise_rts(struct isi_port *port)
-{
- struct isi_board *card = port->card;
- unsigned long base = card->base;
- u16 channel = port->channel;
-
- if (WaitTillCardIsFree(base))
- return;
-
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw(0x0a04, base);
- InterruptTheCard(base);
- port->status |= ISI_RTS;
-}
-
-/* card->lock HAS to be held */
-static inline void drop_rts(struct isi_port *port)
-{
- struct isi_board *card = port->card;
- unsigned long base = card->base;
- u16 channel = port->channel;
-
- if (WaitTillCardIsFree(base))
- return;
-
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw(0x0804, base);
- InterruptTheCard(base);
- port->status &= ~ISI_RTS;
-}
-
-/* card->lock MUST NOT be held */
-
-static void isicom_dtr_rts(struct tty_port *port, int on)
-{
- struct isi_port *ip = container_of(port, struct isi_port, port);
- struct isi_board *card = ip->card;
- unsigned long base = card->base;
- u16 channel = ip->channel;
-
- if (!lock_card(card))
- return;
-
- if (on) {
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw(0x0f04, base);
- InterruptTheCard(base);
- ip->status |= (ISI_DTR | ISI_RTS);
- } else {
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw(0x0C04, base);
- InterruptTheCard(base);
- ip->status &= ~(ISI_DTR | ISI_RTS);
- }
- unlock_card(card);
-}
-
-/* card->lock HAS to be held */
-static void drop_dtr_rts(struct isi_port *port)
-{
- struct isi_board *card = port->card;
- unsigned long base = card->base;
- u16 channel = port->channel;
-
- if (WaitTillCardIsFree(base))
- return;
-
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw(0x0c04, base);
- InterruptTheCard(base);
- port->status &= ~(ISI_RTS | ISI_DTR);
-}
-
-/*
- * ISICOM Driver specific routines ...
- *
- */
-
-static inline int __isicom_paranoia_check(struct isi_port const *port,
- char *name, const char *routine)
-{
- if (!port) {
- pr_warn("Warning: bad isicom magic for dev %s in %s\n",
- name, routine);
- return 1;
- }
- if (port->magic != ISICOM_MAGIC) {
- pr_warn("Warning: NULL isicom port for dev %s in %s\n",
- name, routine);
- return 1;
- }
-
- return 0;
-}
-
-/*
- * Transmitter.
- *
- * We shovel data into the card buffers on a regular basis. The card
- * will do the rest of the work for us.
- */
-
-static void isicom_tx(struct timer_list *unused)
-{
- unsigned long flags, base;
- unsigned int retries;
- short count = (BOARD_COUNT-1), card;
- short txcount, wrd, residue, word_count, cnt;
- struct isi_port *port;
- struct tty_struct *tty;
-
- /* find next active board */
- card = (prev_card + 1) & 0x0003;
- while (count-- > 0) {
- if (isi_card[card].status & BOARD_ACTIVE)
- break;
- card = (card + 1) & 0x0003;
- }
- if (!(isi_card[card].status & BOARD_ACTIVE))
- goto sched_again;
-
- prev_card = card;
-
- count = isi_card[card].port_count;
- port = isi_card[card].ports;
- base = isi_card[card].base;
-
- spin_lock_irqsave(&isi_card[card].card_lock, flags);
- for (retries = 0; retries < 100; retries++) {
- if (inw(base + 0xe) & 0x1)
- break;
- udelay(2);
- }
- if (retries >= 100)
- goto unlock;
-
- tty = tty_port_tty_get(&port->port);
- if (tty == NULL)
- goto put_unlock;
-
- for (; count > 0; count--, port++) {
- /* port not active or tx disabled to force flow control */
- if (!tty_port_initialized(&port->port) ||
- !(port->status & ISI_TXOK))
- continue;
-
- txcount = min_t(short, TX_SIZE, port->xmit_cnt);
- if (txcount <= 0 || tty->stopped || tty->hw_stopped)
- continue;
-
- if (!(inw(base + 0x02) & (1 << port->channel)))
- continue;
-
- pr_debug("txing %d bytes, port%d.\n",
- txcount, port->channel + 1);
- outw((port->channel << isi_card[card].shift_count) | txcount,
- base);
- residue = NO;
- wrd = 0;
- while (1) {
- cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE
- - port->xmit_tail));
- if (residue == YES) {
- residue = NO;
- if (cnt > 0) {
- wrd |= (port->port.xmit_buf[port->xmit_tail]
- << 8);
- port->xmit_tail = (port->xmit_tail + 1)
- & (SERIAL_XMIT_SIZE - 1);
- port->xmit_cnt--;
- txcount--;
- cnt--;
- outw(wrd, base);
- } else {
- outw(wrd, base);
- break;
- }
- }
- if (cnt <= 0)
- break;
- word_count = cnt >> 1;
- outsw(base, port->port.xmit_buf+port->xmit_tail, word_count);
- port->xmit_tail = (port->xmit_tail
- + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
- txcount -= (word_count << 1);
- port->xmit_cnt -= (word_count << 1);
- if (cnt & 0x0001) {
- residue = YES;
- wrd = port->port.xmit_buf[port->xmit_tail];
- port->xmit_tail = (port->xmit_tail + 1)
- & (SERIAL_XMIT_SIZE - 1);
- port->xmit_cnt--;
- txcount--;
- }
- }
-
- InterruptTheCard(base);
- if (port->xmit_cnt <= 0)
- port->status &= ~ISI_TXOK;
- if (port->xmit_cnt <= WAKEUP_CHARS)
- tty_wakeup(tty);
- }
-
-put_unlock:
- tty_kref_put(tty);
-unlock:
- spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
- /* schedule another tx for hopefully in about 10ms */
-sched_again:
- mod_timer(&tx, jiffies + msecs_to_jiffies(10));
-}
-
-/*
- * Main interrupt handler routine
- */
-
-static irqreturn_t isicom_interrupt(int irq, void *dev_id)
-{
- struct isi_board *card = dev_id;
- struct isi_port *port;
- struct tty_struct *tty;
- unsigned long base;
- u16 header, word_count, count, channel;
- short byte_count;
- unsigned char *rp;
-
- if (!card || !(card->status & FIRMWARE_LOADED))
- return IRQ_NONE;
-
- base = card->base;
-
- /* did the card interrupt us? */
- if (!(inw(base + 0x0e) & 0x02))
- return IRQ_NONE;
-
- spin_lock(&card->card_lock);
-
- /*
- * disable any interrupts from the PCI card and lower the
- * interrupt line
- */
- outw(0x8000, base+0x04);
- ClearInterrupt(base);
-
- inw(base); /* get the dummy word out */
- header = inw(base);
- channel = (header & 0x7800) >> card->shift_count;
- byte_count = header & 0xff;
-
- if (channel + 1 > card->port_count) {
- pr_warn("%s(0x%lx): %d(channel) > port_count\n",
- __func__, base, channel + 1);
- outw(0x0000, base+0x04); /* enable interrupts */
- spin_unlock(&card->card_lock);
- return IRQ_HANDLED;
- }
- port = card->ports + channel;
- if (!tty_port_initialized(&port->port)) {
- outw(0x0000, base+0x04); /* enable interrupts */
- spin_unlock(&card->card_lock);
- return IRQ_HANDLED;
- }
-
- tty = tty_port_tty_get(&port->port);
- if (tty == NULL) {
- while (byte_count > 1) {
- inw(base);
- byte_count -= 2;
- }
- if (byte_count & 0x01)
- inw(base);
- outw(0x0000, base+0x04); /* enable interrupts */
- spin_unlock(&card->card_lock);
- return IRQ_HANDLED;
- }
-
- if (header & 0x8000) { /* Status Packet */
- header = inw(base);
- switch (header & 0xff) {
- case 0: /* Change in EIA signals */
- if (tty_port_check_carrier(&port->port)) {
- if (port->status & ISI_DCD) {
- if (!(header & ISI_DCD)) {
- /* Carrier has been lost */
- pr_debug("%s: DCD->low.\n",
- __func__);
- port->status &= ~ISI_DCD;
- tty_hangup(tty);
- }
- } else if (header & ISI_DCD) {
- /* Carrier has been detected */
- pr_debug("%s: DCD->high.\n",
- __func__);
- port->status |= ISI_DCD;
- wake_up_interruptible(&port->port.open_wait);
- }
- } else {
- if (header & ISI_DCD)
- port->status |= ISI_DCD;
- else
- port->status &= ~ISI_DCD;
- }
-
- if (tty_port_cts_enabled(&port->port)) {
- if (tty->hw_stopped) {
- if (header & ISI_CTS) {
- tty->hw_stopped = 0;
- /* start tx ing */
- port->status |= (ISI_TXOK
- | ISI_CTS);
- tty_wakeup(tty);
- }
- } else if (!(header & ISI_CTS)) {
- tty->hw_stopped = 1;
- /* stop tx ing */
- port->status &= ~(ISI_TXOK | ISI_CTS);
- }
- } else {
- if (header & ISI_CTS)
- port->status |= ISI_CTS;
- else
- port->status &= ~ISI_CTS;
- }
-
- if (header & ISI_DSR)
- port->status |= ISI_DSR;
- else
- port->status &= ~ISI_DSR;
-
- if (header & ISI_RI)
- port->status |= ISI_RI;
- else
- port->status &= ~ISI_RI;
-
- break;
-
- case 1: /* Received Break !!! */
- tty_insert_flip_char(&port->port, 0, TTY_BREAK);
- if (port->port.flags & ASYNC_SAK)
- do_SAK(tty);
- tty_flip_buffer_push(&port->port);
- break;
-
- case 2: /* Statistics */
- pr_debug("%s: stats!!!\n", __func__);
- break;
-
- default:
- pr_debug("%s: Unknown code in status packet.\n",
- __func__);
- break;
- }
- } else { /* Data Packet */
- count = tty_prepare_flip_string(&port->port, &rp,
- byte_count & ~1);
- pr_debug("%s: Can rx %d of %d bytes.\n",
- __func__, count, byte_count);
- word_count = count >> 1;
- insw(base, rp, word_count);
- byte_count -= (word_count << 1);
- if (count & 0x0001) {
- tty_insert_flip_char(&port->port, inw(base) & 0xff,
- TTY_NORMAL);
- byte_count -= 2;
- }
- if (byte_count > 0) {
- pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n",
- __func__, base, channel + 1);
- /* drain out unread xtra data */
- while (byte_count > 0) {
- inw(base);
- byte_count -= 2;
- }
- }
- tty_flip_buffer_push(&port->port);
- }
- outw(0x0000, base+0x04); /* enable interrupts */
- spin_unlock(&card->card_lock);
- tty_kref_put(tty);
-
- return IRQ_HANDLED;
-}
-
-static void isicom_config_port(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
- unsigned long baud;
- unsigned long base = card->base;
- u16 channel_setup, channel = port->channel,
- shift_count = card->shift_count;
- unsigned char flow_ctrl;
-
- /* FIXME: Switch to new tty baud API */
- baud = C_BAUD(tty);
- if (baud & CBAUDEX) {
- baud &= ~CBAUDEX;
-
- /* if CBAUDEX bit is on and the baud is set to either 50 or 75
- * then the card is programmed for 57.6Kbps or 115Kbps
- * respectively.
- */
-
- /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
- if (baud < 1 || baud > 4)
- tty->termios.c_cflag &= ~CBAUDEX;
- else
- baud += 15;
- }
- if (baud == 15) {
-
- /* the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set
- * by the set_serial_info ioctl ... this is done by
- * the 'setserial' utility.
- */
-
- if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- baud++; /* 57.6 Kbps */
- if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- baud += 2; /* 115 Kbps */
- if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- baud += 3; /* 230 kbps*/
- if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- baud += 4; /* 460 kbps*/
- }
- if (linuxb_to_isib[baud] == -1) {
- /* hang up */
- drop_dtr(port);
- return;
- } else
- raise_dtr(port);
-
- if (WaitTillCardIsFree(base) == 0) {
- outw(0x8000 | (channel << shift_count) | 0x03, base);
- outw(linuxb_to_isib[baud] << 8 | 0x03, base);
- channel_setup = 0;
- switch (C_CSIZE(tty)) {
- case CS5:
- channel_setup |= ISICOM_CS5;
- break;
- case CS6:
- channel_setup |= ISICOM_CS6;
- break;
- case CS7:
- channel_setup |= ISICOM_CS7;
- break;
- case CS8:
- channel_setup |= ISICOM_CS8;
- break;
- }
-
- if (C_CSTOPB(tty))
- channel_setup |= ISICOM_2SB;
- if (C_PARENB(tty)) {
- channel_setup |= ISICOM_EVPAR;
- if (C_PARODD(tty))
- channel_setup |= ISICOM_ODPAR;
- }
- outw(channel_setup, base);
- InterruptTheCard(base);
- }
- tty_port_set_check_carrier(&port->port, !C_CLOCAL(tty));
-
- /* flow control settings ...*/
- flow_ctrl = 0;
- tty_port_set_cts_flow(&port->port, C_CRTSCTS(tty));
- if (C_CRTSCTS(tty))
- flow_ctrl |= ISICOM_CTSRTS;
- if (I_IXON(tty))
- flow_ctrl |= ISICOM_RESPOND_XONXOFF;
- if (I_IXOFF(tty))
- flow_ctrl |= ISICOM_INITIATE_XONXOFF;
-
- if (WaitTillCardIsFree(base) == 0) {
- outw(0x8000 | (channel << shift_count) | 0x04, base);
- outw(flow_ctrl << 8 | 0x05, base);
- outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
- InterruptTheCard(base);
- }
-
- /* rx enabled -> enable port for rx on the card */
- if (C_CREAD(tty)) {
- card->port_status |= (1 << channel);
- outw(card->port_status, base + 0x02);
- }
-}
-
-/* open et all */
-
-static inline void isicom_setup_board(struct isi_board *bp)
-{
- int channel;
- struct isi_port *port;
-
- bp->count++;
- if (!(bp->status & BOARD_INIT)) {
- port = bp->ports;
- for (channel = 0; channel < bp->port_count; channel++, port++)
- drop_dtr_rts(port);
- }
- bp->status |= BOARD_ACTIVE | BOARD_INIT;
-}
-
-/* Activate and thus setup board are protected from races against shutdown
- by the tty_port mutex */
-
-static int isicom_activate(struct tty_port *tport, struct tty_struct *tty)
-{
- struct isi_port *port = container_of(tport, struct isi_port, port);
- struct isi_board *card = port->card;
- unsigned long flags;
-
- if (tty_port_alloc_xmit_buf(tport) < 0)
- return -ENOMEM;
-
- spin_lock_irqsave(&card->card_lock, flags);
- isicom_setup_board(card);
-
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
-
- /* discard any residual data */
- if (WaitTillCardIsFree(card->base) == 0) {
- outw(0x8000 | (port->channel << card->shift_count) | 0x02,
- card->base);
- outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base);
- InterruptTheCard(card->base);
- }
- isicom_config_port(tty);
- spin_unlock_irqrestore(&card->card_lock, flags);
-
- return 0;
-}
-
-static int isicom_carrier_raised(struct tty_port *port)
-{
- struct isi_port *ip = container_of(port, struct isi_port, port);
- return (ip->status & ISI_DCD)?1 : 0;
-}
-
-static struct tty_port *isicom_find_port(struct tty_struct *tty)
-{
- struct isi_port *port;
- struct isi_board *card;
- unsigned int board;
- int line = tty->index;
-
- board = BOARD(line);
- card = &isi_card[board];
-
- if (!(card->status & FIRMWARE_LOADED))
- return NULL;
-
- /* open on a port greater than the port count for the card !!! */
- if (line > ((board * 16) + card->port_count - 1))
- return NULL;
-
- port = &isi_ports[line];
- if (isicom_paranoia_check(port, tty->name, "isicom_open"))
- return NULL;
-
- return &port->port;
-}
-
-static int isicom_open(struct tty_struct *tty, struct file *filp)
-{
- struct isi_port *port;
- struct tty_port *tport;
-
- tport = isicom_find_port(tty);
- if (tport == NULL)
- return -ENODEV;
- port = container_of(tport, struct isi_port, port);
-
- tty->driver_data = port;
- return tty_port_open(tport, tty, filp);
-}
-
-/* close et all */
-
-/* card->lock HAS to be held */
-static void isicom_shutdown_port(struct isi_port *port)
-{
- struct isi_board *card = port->card;
-
- if (--card->count < 0) {
- pr_debug("%s: bad board(0x%lx) count %d.\n",
- __func__, card->base, card->count);
- card->count = 0;
- }
- /* last port was closed, shutdown that board too */
- if (!card->count)
- card->status &= BOARD_ACTIVE;
-}
-
-static void isicom_flush_buffer(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
- unsigned long flags;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
- return;
-
- spin_lock_irqsave(&card->card_lock, flags);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&card->card_lock, flags);
-
- tty_wakeup(tty);
-}
-
-static void isicom_shutdown(struct tty_port *port)
-{
- struct isi_port *ip = container_of(port, struct isi_port, port);
- struct isi_board *card = ip->card;
- unsigned long flags;
-
- /* indicate to the card that no more data can be received
- on this port */
- spin_lock_irqsave(&card->card_lock, flags);
- card->port_status &= ~(1 << ip->channel);
- outw(card->port_status, card->base + 0x02);
- isicom_shutdown_port(ip);
- spin_unlock_irqrestore(&card->card_lock, flags);
- tty_port_free_xmit_buf(port);
-}
-
-static void isicom_close(struct tty_struct *tty, struct file *filp)
-{
- struct isi_port *ip = tty->driver_data;
- struct tty_port *port;
-
- if (ip == NULL)
- return;
-
- port = &ip->port;
- if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
- return;
- tty_port_close(port, tty, filp);
-}
-
-/* write et all */
-static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
- int count)
-{
- struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
- unsigned long flags;
- int cnt, total = 0;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_write"))
- return 0;
-
- spin_lock_irqsave(&card->card_lock, flags);
-
- while (1) {
- cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
- - 1, SERIAL_XMIT_SIZE - port->xmit_head));
- if (cnt <= 0)
- break;
-
- memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt);
- port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
- - 1);
- port->xmit_cnt += cnt;
- buf += cnt;
- count -= cnt;
- total += cnt;
- }
- if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped)
- port->status |= ISI_TXOK;
- spin_unlock_irqrestore(&card->card_lock, flags);
- return total;
-}
-
-/* put_char et all */
-static int isicom_put_char(struct tty_struct *tty, unsigned char ch)
-{
- struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
- unsigned long flags;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
- return 0;
-
- spin_lock_irqsave(&card->card_lock, flags);
- if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
- spin_unlock_irqrestore(&card->card_lock, flags);
- return 0;
- }
-
- port->port.xmit_buf[port->xmit_head++] = ch;
- port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
- port->xmit_cnt++;
- spin_unlock_irqrestore(&card->card_lock, flags);
- return 1;
-}
-
-/* flush_chars et all */
-static void isicom_flush_chars(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
- return;
-
- if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !port->port.xmit_buf)
- return;
-
- /* this tells the transmitter to consider this port for
- data output to the card ... that's the best we can do. */
- port->status |= ISI_TXOK;
-}
-
-/* write_room et all */
-static int isicom_write_room(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
- int free;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_write_room"))
- return 0;
-
- free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
- if (free < 0)
- free = 0;
- return free;
-}
-
-/* chars_in_buffer et all */
-static int isicom_chars_in_buffer(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
- if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer"))
- return 0;
- return port->xmit_cnt;
-}
-
-/* ioctl et all */
-static int isicom_send_break(struct tty_struct *tty, int length)
-{
- struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
- unsigned long base = card->base;
-
- if (length == -1)
- return -EOPNOTSUPP;
-
- if (!lock_card(card))
- return -EINVAL;
-
- outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
- outw((length & 0xff) << 8 | 0x00, base);
- outw((length & 0xff00u), base);
- InterruptTheCard(base);
-
- unlock_card(card);
- return 0;
-}
-
-static int isicom_tiocmget(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
- /* just send the port status */
- u16 status = port->status;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
- return -ENODEV;
-
- return ((status & ISI_RTS) ? TIOCM_RTS : 0) |
- ((status & ISI_DTR) ? TIOCM_DTR : 0) |
- ((status & ISI_DCD) ? TIOCM_CAR : 0) |
- ((status & ISI_DSR) ? TIOCM_DSR : 0) |
- ((status & ISI_CTS) ? TIOCM_CTS : 0) |
- ((status & ISI_RI ) ? TIOCM_RI : 0);
-}
-
-static int isicom_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct isi_port *port = tty->driver_data;
- unsigned long flags;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
- return -ENODEV;
-
- spin_lock_irqsave(&port->card->card_lock, flags);
- if (set & TIOCM_RTS)
- raise_rts(port);
- if (set & TIOCM_DTR)
- raise_dtr(port);
-
- if (clear & TIOCM_RTS)
- drop_rts(port);
- if (clear & TIOCM_DTR)
- drop_dtr(port);
- spin_unlock_irqrestore(&port->card->card_lock, flags);
-
- return 0;
-}
-
-static int isicom_set_serial_info(struct tty_struct *tty,
- struct serial_struct *ss)
-{
- struct isi_port *port = tty->driver_data;
- int reconfig_port;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
- return -ENODEV;
-
- mutex_lock(&port->port.mutex);
- reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
- (ss->flags & ASYNC_SPD_MASK));
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((ss->close_delay != port->port.close_delay) ||
- (ss->closing_wait != port->port.closing_wait) ||
- ((ss->flags & ~ASYNC_USR_MASK) !=
- (port->port.flags & ~ASYNC_USR_MASK))) {
- mutex_unlock(&port->port.mutex);
- return -EPERM;
- }
- port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
- (ss->flags & ASYNC_USR_MASK));
- } else {
- port->port.close_delay = ss->close_delay;
- port->port.closing_wait = ss->closing_wait;
- port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
- (ss->flags & ASYNC_FLAGS));
- }
- if (reconfig_port) {
- unsigned long flags;
- spin_lock_irqsave(&port->card->card_lock, flags);
- isicom_config_port(tty);
- spin_unlock_irqrestore(&port->card->card_lock, flags);
- }
- mutex_unlock(&port->port.mutex);
- return 0;
-}
-
-static int isicom_get_serial_info(struct tty_struct *tty,
- struct serial_struct *ss)
-{
- struct isi_port *port = tty->driver_data;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
- return -ENODEV;
-
- mutex_lock(&port->port.mutex);
-/* ss->type = ? */
- ss->line = port - isi_ports;
- ss->port = port->card->base;
- ss->irq = port->card->irq;
- ss->flags = port->port.flags;
-/* ss->baud_base = ? */
- ss->close_delay = port->port.close_delay;
- ss->closing_wait = port->port.closing_wait;
- mutex_unlock(&port->port.mutex);
- return 0;
-}
-
-/* set_termios et all */
-static void isicom_set_termios(struct tty_struct *tty,
- struct ktermios *old_termios)
-{
- struct isi_port *port = tty->driver_data;
- unsigned long flags;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
- return;
-
- if (tty->termios.c_cflag == old_termios->c_cflag &&
- tty->termios.c_iflag == old_termios->c_iflag)
- return;
-
- spin_lock_irqsave(&port->card->card_lock, flags);
- isicom_config_port(tty);
- spin_unlock_irqrestore(&port->card->card_lock, flags);
-
- if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
- tty->hw_stopped = 0;
- isicom_start(tty);
- }
-}
-
-/* throttle et all */
-static void isicom_throttle(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_throttle"))
- return;
-
- /* tell the card that this port cannot handle any more data for now */
- card->port_status &= ~(1 << port->channel);
- outw(card->port_status, card->base + 0x02);
-}
-
-/* unthrottle et all */
-static void isicom_unthrottle(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle"))
- return;
-
- /* tell the card that this port is ready to accept more data */
- card->port_status |= (1 << port->channel);
- outw(card->port_status, card->base + 0x02);
-}
-
-/* stop et all */
-static void isicom_stop(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_stop"))
- return;
-
- /* this tells the transmitter not to consider this port for
- data output to the card. */
- port->status &= ~ISI_TXOK;
-}
-
-/* start et all */
-static void isicom_start(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_start"))
- return;
-
- /* this tells the transmitter to consider this port for
- data output to the card. */
- port->status |= ISI_TXOK;
-}
-
-static void isicom_hangup(struct tty_struct *tty)
-{
- struct isi_port *port = tty->driver_data;
-
- if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
- return;
- tty_port_hangup(&port->port);
-}
-
-
-/*
- * Driver init and deinit functions
- */
-
-static const struct tty_operations isicom_ops = {
- .open = isicom_open,
- .close = isicom_close,
- .write = isicom_write,
- .put_char = isicom_put_char,
- .flush_chars = isicom_flush_chars,
- .write_room = isicom_write_room,
- .chars_in_buffer = isicom_chars_in_buffer,
- .set_termios = isicom_set_termios,
- .throttle = isicom_throttle,
- .unthrottle = isicom_unthrottle,
- .stop = isicom_stop,
- .start = isicom_start,
- .hangup = isicom_hangup,
- .flush_buffer = isicom_flush_buffer,
- .tiocmget = isicom_tiocmget,
- .tiocmset = isicom_tiocmset,
- .break_ctl = isicom_send_break,
- .get_serial = isicom_get_serial_info,
- .set_serial = isicom_set_serial_info,
-};
-
-static const struct tty_port_operations isicom_port_ops = {
- .carrier_raised = isicom_carrier_raised,
- .dtr_rts = isicom_dtr_rts,
- .activate = isicom_activate,
- .shutdown = isicom_shutdown,
-};
-
-static int reset_card(struct pci_dev *pdev,
- const unsigned int card, unsigned int *signature)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
- unsigned long base = board->base;
- unsigned int sig, portcount = 0;
- int retval = 0;
-
- dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1,
- base);
-
- inw(base + 0x8);
-
- msleep(10);
-
- outw(0, base + 0x8); /* Reset */
-
- msleep(1000);
-
- sig = inw(base + 0x4) & 0xff;
-
- if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd &&
- sig != 0xee) {
- dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible "
- "bad I/O Port Address 0x%lx).\n", card + 1, base);
- dev_dbg(&pdev->dev, "Sig=0x%x\n", sig);
- retval = -EIO;
- goto end;
- }
-
- msleep(10);
-
- portcount = inw(base + 0x2);
- if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 &&
- portcount != 8 && portcount != 16)) {
- dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
- card + 1);
- retval = -EIO;
- goto end;
- }
-
- switch (sig) {
- case 0xa5:
- case 0xbb:
- case 0xdd:
- board->port_count = (portcount == 4) ? 4 : 8;
- board->shift_count = 12;
- break;
- case 0xcc:
- case 0xee:
- board->port_count = 16;
- board->shift_count = 11;
- break;
- }
- dev_info(&pdev->dev, "-Done\n");
- *signature = sig;
-
-end:
- return retval;
-}
-
-static int load_firmware(struct pci_dev *pdev,
- const unsigned int index, const unsigned int signature)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
- const struct firmware *fw;
- unsigned long base = board->base;
- unsigned int a;
- u16 word_count, status;
- int retval = -EIO;
- char *name;
- u8 *data;
-
- struct stframe {
- u16 addr;
- u16 count;
- u8 data[0];
- } *frame;
-
- switch (signature) {
- case 0xa5:
- name = "isi608.bin";
- break;
- case 0xbb:
- name = "isi608em.bin";
- break;
- case 0xcc:
- name = "isi616em.bin";
- break;
- case 0xdd:
- name = "isi4608.bin";
- break;
- case 0xee:
- name = "isi4616.bin";
- break;
- default:
- dev_err(&pdev->dev, "Unknown signature.\n");
- goto end;
- }
-
- retval = request_firmware(&fw, name, &pdev->dev);
- if (retval)
- goto end;
-
- retval = -EIO;
-
- for (frame = (struct stframe *)fw->data;
- frame < (struct stframe *)(fw->data + fw->size);
- frame = (struct stframe *)((u8 *)(frame + 1) +
- frame->count)) {
- if (WaitTillCardIsFree(base))
- goto errrelfw;
-
- outw(0xf0, base); /* start upload sequence */
- outw(0x00, base);
- outw(frame->addr, base); /* lsb of address */
-
- word_count = frame->count / 2 + frame->count % 2;
- outw(word_count, base);
- InterruptTheCard(base);
-
- udelay(100); /* 0x2f */
-
- if (WaitTillCardIsFree(base))
- goto errrelfw;
-
- status = inw(base + 0x4);
- if (status != 0) {
- dev_warn(&pdev->dev, "Card%d rejected load header:\n"
- "Address:0x%x\n"
- "Count:0x%x\n"
- "Status:0x%x\n",
- index + 1, frame->addr, frame->count, status);
- goto errrelfw;
- }
- outsw(base, frame->data, word_count);
-
- InterruptTheCard(base);
-
- udelay(50); /* 0x0f */
-
- if (WaitTillCardIsFree(base))
- goto errrelfw;
-
- status = inw(base + 0x4);
- if (status != 0) {
- dev_err(&pdev->dev, "Card%d got out of sync.Card "
- "Status:0x%x\n", index + 1, status);
- goto errrelfw;
- }
- }
-
-/* XXX: should we test it by reading it back and comparing with original like
- * in load firmware package? */
- for (frame = (struct stframe *)fw->data;
- frame < (struct stframe *)(fw->data + fw->size);
- frame = (struct stframe *)((u8 *)(frame + 1) +
- frame->count)) {
- if (WaitTillCardIsFree(base))
- goto errrelfw;
-
- outw(0xf1, base); /* start download sequence */
- outw(0x00, base);
- outw(frame->addr, base); /* lsb of address */
-
- word_count = (frame->count >> 1) + frame->count % 2;
- outw(word_count + 1, base);
- InterruptTheCard(base);
-
- udelay(50); /* 0xf */
-
- if (WaitTillCardIsFree(base))
- goto errrelfw;
-
- status = inw(base + 0x4);
- if (status != 0) {
- dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
- "Address:0x%x\n"
- "Count:0x%x\n"
- "Status: 0x%x\n",
- index + 1, frame->addr, frame->count, status);
- goto errrelfw;
- }
-
- data = kmalloc_array(word_count, 2, GFP_KERNEL);
- if (data == NULL) {
- dev_err(&pdev->dev, "Card%d, firmware upload "
- "failed, not enough memory\n", index + 1);
- goto errrelfw;
- }
- inw(base);
- insw(base, data, word_count);
- InterruptTheCard(base);
-
- for (a = 0; a < frame->count; a++)
- if (data[a] != frame->data[a]) {
- kfree(data);
- dev_err(&pdev->dev, "Card%d, firmware upload "
- "failed\n", index + 1);
- goto errrelfw;
- }
- kfree(data);
-
- udelay(50); /* 0xf */
-
- if (WaitTillCardIsFree(base))
- goto errrelfw;
-
- status = inw(base + 0x4);
- if (status != 0) {
- dev_err(&pdev->dev, "Card%d verify got out of sync. "
- "Card Status:0x%x\n", index + 1, status);
- goto errrelfw;
- }
- }
-
- /* xfer ctrl */
- if (WaitTillCardIsFree(base))
- goto errrelfw;
-
- outw(0xf2, base);
- outw(0x800, base);
- outw(0x0, base);
- outw(0x0, base);
- InterruptTheCard(base);
- outw(0x0, base + 0x4); /* for ISI4608 cards */
-
- board->status |= FIRMWARE_LOADED;
- retval = 0;
-
-errrelfw:
- release_firmware(fw);
-end:
- return retval;
-}
-
-/*
- * Insmod can set static symbols so keep these static
- */
-static unsigned int card_count;
-
-static int isicom_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- unsigned int signature, index;
- int retval = -EPERM;
- struct isi_board *board = NULL;
-
- if (card_count >= BOARD_COUNT)
- goto err;
-
- retval = pci_enable_device(pdev);
- if (retval) {
- dev_err(&pdev->dev, "failed to enable\n");
- goto err;
- }
-
- dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
-
- /* allot the first empty slot in the array */
- for (index = 0; index < BOARD_COUNT; index++) {
- if (isi_card[index].base == 0) {
- board = &isi_card[index];
- break;
- }
- }
- if (index == BOARD_COUNT) {
- retval = -ENODEV;
- goto err_disable;
- }
-
- board->index = index;
- board->base = pci_resource_start(pdev, 3);
- board->irq = pdev->irq;
- card_count++;
-
- pci_set_drvdata(pdev, board);
-
- retval = pci_request_region(pdev, 3, ISICOM_NAME);
- if (retval) {
- dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
- "will be disabled.\n", board->base, board->base + 15,
- index + 1);
- retval = -EBUSY;
- goto errdec;
- }
-
- retval = request_irq(board->irq, isicom_interrupt,
- IRQF_SHARED, ISICOM_NAME, board);
- if (retval < 0) {
- dev_err(&pdev->dev, "Could not install handler at Irq %d. "
- "Card%d will be disabled.\n", board->irq, index + 1);
- goto errunrr;
- }
-
- retval = reset_card(pdev, index, &signature);
- if (retval < 0)
- goto errunri;
-
- retval = load_firmware(pdev, index, signature);
- if (retval < 0)
- goto errunri;
-
- for (index = 0; index < board->port_count; index++) {
- struct tty_port *tport = &board->ports[index].port;
- tty_port_init(tport);
- tport->ops = &isicom_port_ops;
- tport->close_delay = 50 * HZ/100;
- tport->closing_wait = 3000 * HZ/100;
- tty_port_register_device(tport, isicom_normal,
- board->index * 16 + index, &pdev->dev);
- }
-
- return 0;
-
-errunri:
- free_irq(board->irq, board);
-errunrr:
- pci_release_region(pdev, 3);
-errdec:
- board->base = 0;
- card_count--;
-err_disable:
- pci_disable_device(pdev);
-err:
- return retval;
-}
-
-static void isicom_remove(struct pci_dev *pdev)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
- unsigned int i;
-
- for (i = 0; i < board->port_count; i++) {
- tty_unregister_device(isicom_normal, board->index * 16 + i);
- tty_port_destroy(&board->ports[i].port);
- }
-
- free_irq(board->irq, board);
- pci_release_region(pdev, 3);
- board->base = 0;
- card_count--;
- pci_disable_device(pdev);
-}
-
-static int __init isicom_init(void)
-{
- int retval, idx, channel;
- struct isi_port *port;
-
- for (idx = 0; idx < BOARD_COUNT; idx++) {
- port = &isi_ports[idx * 16];
- isi_card[idx].ports = port;
- spin_lock_init(&isi_card[idx].card_lock);
- for (channel = 0; channel < 16; channel++, port++) {
- port->magic = ISICOM_MAGIC;
- port->card = &isi_card[idx];
- port->channel = channel;
- port->status = 0;
- /* . . . */
- }
- isi_card[idx].base = 0;
- isi_card[idx].irq = 0;
- }
-
- /* tty driver structure initialization */
- isicom_normal = alloc_tty_driver(PORT_COUNT);
- if (!isicom_normal) {
- retval = -ENOMEM;
- goto error;
- }
-
- isicom_normal->name = "ttyM";
- isicom_normal->major = ISICOM_NMAJOR;
- isicom_normal->minor_start = 0;
- isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
- isicom_normal->subtype = SERIAL_TYPE_NORMAL;
- isicom_normal->init_termios = tty_std_termios;
- isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
- CLOCAL;
- isicom_normal->flags = TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK;
- tty_set_operations(isicom_normal, &isicom_ops);
-
- retval = tty_register_driver(isicom_normal);
- if (retval) {
- pr_debug("Couldn't register the dialin driver\n");
- goto err_puttty;
- }
-
- retval = pci_register_driver(&isicom_driver);
- if (retval < 0) {
- pr_err("Unable to register pci driver.\n");
- goto err_unrtty;
- }
-
- mod_timer(&tx, jiffies + 1);
-
- return 0;
-err_unrtty:
- tty_unregister_driver(isicom_normal);
-err_puttty:
- put_tty_driver(isicom_normal);
-error:
- return retval;
-}
-
-static void __exit isicom_exit(void)
-{
- del_timer_sync(&tx);
-
- pci_unregister_driver(&isicom_driver);
- tty_unregister_driver(isicom_normal);
- put_tty_driver(isicom_normal);
-}
-
-module_init(isicom_init);
-module_exit(isicom_exit);
-
-MODULE_AUTHOR("MultiTech");
-MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("isi608.bin");
-MODULE_FIRMWARE("isi608em.bin");
-MODULE_FIRMWARE("isi616em.bin");
-MODULE_FIRMWARE("isi4608.bin");
-MODULE_FIRMWARE("isi4616.bin");
diff --git a/include/linux/isicom.h b/include/linux/isicom.h
deleted file mode 100644
index 7de6822d7b1a..000000000000
--- a/include/linux/isicom.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_ISICOM_H
-#define _LINUX_ISICOM_H
-
-#define YES 1
-#define NO 0
-
-/*
- * ISICOM Driver definitions ...
- *
- */
-
-#define ISICOM_NAME "ISICom"
-
-/*
- * PCI definitions
- */
-
-#define DEVID_COUNT 9
-#define VENDOR_ID 0x10b5
-
-/*
- * These are now officially allocated numbers
- */
-
-#define ISICOM_NMAJOR 112 /* normal */
-#define ISICOM_CMAJOR 113 /* callout */
-#define ISICOM_MAGIC (('M' << 8) | 'T')
-
-#define WAKEUP_CHARS 256 /* hard coded for now */
-#define TX_SIZE 254
-
-#define BOARD_COUNT 4
-#define PORT_COUNT (BOARD_COUNT*16)
-
-/* character sizes */
-
-#define ISICOM_CS5 0x0000
-#define ISICOM_CS6 0x0001
-#define ISICOM_CS7 0x0002
-#define ISICOM_CS8 0x0003
-
-/* stop bits */
-
-#define ISICOM_1SB 0x0000
-#define ISICOM_2SB 0x0004
-
-/* parity */
-
-#define ISICOM_NOPAR 0x0000
-#define ISICOM_ODPAR 0x0008
-#define ISICOM_EVPAR 0x0018
-
-/* flow control */
-
-#define ISICOM_CTSRTS 0x03
-#define ISICOM_INITIATE_XONXOFF 0x04
-#define ISICOM_RESPOND_XONXOFF 0x08
-
-#define BOARD(line) (((line) >> 4) & 0x3)
-
- /* isi kill queue bitmap */
-
-#define ISICOM_KILLTX 0x01
-#define ISICOM_KILLRX 0x02
-
- /* isi_board status bitmap */
-
-#define FIRMWARE_LOADED 0x0001
-#define BOARD_ACTIVE 0x0002
-#define BOARD_INIT 0x0004
-
- /* isi_port status bitmap */
-
-#define ISI_CTS 0x1000
-#define ISI_DSR 0x2000
-#define ISI_RI 0x4000
-#define ISI_DCD 0x8000
-#define ISI_DTR 0x0100
-#define ISI_RTS 0x0200
-
-
-#define ISI_TXOK 0x0001
-
-#endif /* ISICOM_H */
--
2.30.1