[PATCH 13/15] ASoC: cs42l42: Only start PLL if it is needed

[Lucas Tanure]

From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>

The PLL is only needed for sclk < 11289600 Hz and cs42l42_pll_config()
will not configure it for higher rates. So it must only be enabled
when it is needed.

Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
---
 sound/soc/codecs/cs42l42.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 5755f8baddbcf..68b5a450623d3 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -855,8 +855,9 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 	} else {
 		if (!cs42l42->stream_use) {
 			/* SCLK must be running before codec unmute */
-			snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
-						      CS42L42_PLL_START_MASK, 1);
+			if ((cs42l42->bclk < 11289600) && (cs42l42->sclk < 11289600))
+				snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
+							      CS42L42_PLL_START_MASK, 1);
 
 			/* Mark SCLK as present, turn off internal oscillator */
 			regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_sclk_seq,
-- 
2.30.1