Re: [PATCH v2,1/3] dt-bindings: media: mtk-vcodec: Separating mtk vcodec encoder node
From: Irui Wang
Date: Sun Mar 07 2021 - 21:12:40 EST
On Sat, 2021-03-06 at 13:46 -0700, Rob Herring wrote:
> On Thu, Feb 25, 2021 at 03:36:01PM +0800, Irui Wang wrote:
> > Updates binding document since the avc and vp8 hardware encoder in
> > MT8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to
> > "mediatek,mt8173-vcodec-enc-vp8" and "mediatek,mt8173-vcodec-enc".
>
> This is not a compatible change. Please explain that here and why that's
> okay (if it is).
>
Dear Rob,
As the following commit message, this is a patch for smi cleaning up
"mediatek,larb", or put the following message in the commit message:
this patch separates the two devices, it's a preparing patch for adding
device_link between the larbs and venc-device. It's mainly for fixing
the problem:
https://lkml.org/lkml/2019/9/3/316
Is this OK ?
> >
> > This is a preparing patch for smi cleaning up "mediatek,larb".
> >
> > Acked-by: Tiffany Lin <tiffany.lin@xxxxxxxxxxxx>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> > Signed-off-by: Maoguang Meng <maoguang.meng@xxxxxxxxxxxx>
> > Signed-off-by: Irui Wang <irui.wang@xxxxxxxxxxxx>
> > ---
> > Change since v1:
> > - rename compatible and device node
> > ---
> > .../bindings/media/mediatek-vcodec.txt | 55 ++++++++++---------
> > 1 file changed, 29 insertions(+), 26 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > index 8217424fd4bd..03209cbd7540 100644
> > --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > @@ -4,7 +4,9 @@ Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
> > supports high resolution encoding and decoding functionalities.
> >
> > Required properties:
> > -- compatible : "mediatek,mt8173-vcodec-enc" for MT8173 encoder
> > +- compatible : must be one of the following string:
> > + "mediatek,mt8173-vcodec-enc-vp8" for mt8173 vp8 encoder.
> > + "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder.
> > "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
> > "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
> > - reg : Physical base address of the video codec registers and length of
> > @@ -13,10 +15,10 @@ Required properties:
> > - mediatek,larb : must contain the local arbiters in the current Socs.
> > - clocks : list of clock specifiers, corresponding to entries in
> > the clock-names property.
> > -- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
> > - "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll",
> > - "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll",
> > - "venc_lt_sel", "vdec_bus_clk_src".
> > +- clock-names:
> > + encoder must contain "venc_sel";
>
> What happened to the other clocks?
>
> Seems like you are dropping what are parent clocks? That seems unrelated
> to the VP8 split? If so, that's a separate change.
Dear Rob,
"venc_sel" is for avc encoder clock, "venc_sel_src" is its parent, we
remove the parent because we set "assigned-clocks" and
"assigned-clock-parents"
same as venc_lt_sel" for vp8 encoder, we split the device node, so the
clocks need split as well. or can we say:
- clock-names:
avc venc must contain "venc_sel";
vp8 venc must contain "venc_lt_sel";
Dear Alexandre,
could you help to give some more suggestions about this?
Thanks
Best Regards
>
> > + decoder must contain "vcodecpll", "univpll_d2", "clk_cci400_sel",
> > + "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel", "vdec_bus_clk_src".
> > - iommus : should point to the respective IOMMU block with master port as
> > argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> > for details.
> > @@ -80,14 +82,10 @@ vcodec_dec: vcodec@16000000 {
> > assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
> > };
> >
> > - vcodec_enc: vcodec@18002000 {
> > +vcodec_enc_avc: vcodec@18002000 {
> > compatible = "mediatek,mt8173-vcodec-enc";
> > - reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
> > - <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
> > - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
> > - <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> > - mediatek,larb = <&larb3>,
> > - <&larb5>;
> > + reg = <0 0x18002000 0 0x1000>;
> > + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
> > iommus = <&iommu M4U_PORT_VENC_RCPU>,
> > <&iommu M4U_PORT_VENC_REC>,
> > <&iommu M4U_PORT_VENC_BSDMA>,
> > @@ -98,8 +96,20 @@ vcodec_dec: vcodec@16000000 {
> > <&iommu M4U_PORT_VENC_REF_LUMA>,
> > <&iommu M4U_PORT_VENC_REF_CHROMA>,
> > <&iommu M4U_PORT_VENC_NBM_RDMA>,
> > - <&iommu M4U_PORT_VENC_NBM_WDMA>,
> > - <&iommu M4U_PORT_VENC_RCPU_SET2>,
> > + <&iommu M4U_PORT_VENC_NBM_WDMA>;
> > + mediatek,larb = <&larb3>;
> > + mediatek,vpu = <&vpu>;
> > + clocks = <&topckgen CLK_TOP_VENC_SEL>;
> > + clock-names = "venc_sel";
> > + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
> > + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
> > + };
> > +
> > +vcodec_enc_vp8: vcodec@19002000 {
> > + compatible = "mediatek,mt8173-vcodec-enc-vp8";
> > + reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
> > + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> > + iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
> > <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
> > <&iommu M4U_PORT_VENC_BSDMA_SET2>,
> > <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
> > @@ -108,17 +118,10 @@ vcodec_dec: vcodec@16000000 {
> > <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
> > <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
> > <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
> > + mediatek,larb = <&larb5>;
> > mediatek,vpu = <&vpu>;
> > - clocks = <&topckgen CLK_TOP_VENCPLL_D2>,
> > - <&topckgen CLK_TOP_VENC_SEL>,
> > - <&topckgen CLK_TOP_UNIVPLL1_D2>,
> > - <&topckgen CLK_TOP_VENC_LT_SEL>;
> > - clock-names = "venc_sel_src",
> > - "venc_sel",
> > - "venc_lt_sel_src",
> > - "venc_lt_sel";
> > - assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
> > - <&topckgen CLK_TOP_VENC_LT_SEL>;
> > - assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
> > - <&topckgen CLK_TOP_UNIVPLL1_D2>;
> > + clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
> > + clock-names = "venc_lt_sel";
> > + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
> > + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
> > };
> > --
> > 2.25.1
> >