[tip: x86/core] x86/stackprotector/32: Make the canary into a regular percpu variable
From: tip-bot2 for Andy Lutomirski
Date: Mon Mar 08 2021 - 08:15:22 EST
The following commit has been merged into the x86/core branch of tip:
Commit-ID: 3fb0fdb3bbe7aed495109b3296b06c2409734023
Gitweb: https://git.kernel.org/tip/3fb0fdb3bbe7aed495109b3296b06c2409734023
Author: Andy Lutomirski <luto@xxxxxxxxxx>
AuthorDate: Sat, 13 Feb 2021 11:19:44 -08:00
Committer: Borislav Petkov <bp@xxxxxxx>
CommitterDate: Mon, 08 Mar 2021 13:19:05 +01:00
x86/stackprotector/32: Make the canary into a regular percpu variable
On 32-bit kernels, the stackprotector canary is quite nasty -- it is
stored at %gs:(20), which is nasty because 32-bit kernels use %fs for
percpu storage. It's even nastier because it means that whether %gs
contains userspace state or kernel state while running kernel code
depends on whether stackprotector is enabled (this is
CONFIG_X86_32_LAZY_GS), and this setting radically changes the way
that segment selectors work. Supporting both variants is a
maintenance and testing mess.
Merely rearranging so that percpu and the stack canary
share the same segment would be messy as the 32-bit percpu address
layout isn't currently compatible with putting a variable at a fixed
offset.
Fortunately, GCC 8.1 added options that allow the stack canary to be
accessed as %fs:__stack_chk_guard, effectively turning it into an ordinary
percpu variable. This lets us get rid of all of the code to manage the
stack canary GDT descriptor and the CONFIG_X86_32_LAZY_GS mess.
(That name is special. We could use any symbol we want for the
%fs-relative mode, but for CONFIG_SMP=n, gcc refuses to let us use any
name other than __stack_chk_guard.)
Forcibly disable stackprotector on older compilers that don't support
the new options and turn the stack canary into a percpu variable. The
"lazy GS" approach is now used for all 32-bit configurations.
Also makes load_gs_index() work on 32-bit kernels. On 64-bit kernels,
it loads the GS selector and updates the user GSBASE accordingly. (This
is unchanged.) On 32-bit kernels, it loads the GS selector and updates
GSBASE, which is now always the user base. This means that the overall
effect is the same on 32-bit and 64-bit, which avoids some ifdeffery.
[ bp: Massage commit message. ]
Signed-off-by: Andy Lutomirski <luto@xxxxxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Link: https://lkml.kernel.org/r/c0ff7dba14041c7e5d1cae5d4df052f03759bef3.1613243844.git.luto@xxxxxxxxxx
---
arch/x86/Kconfig | 7 +--
arch/x86/Makefile | 8 ++-
arch/x86/entry/entry_32.S | 56 +---------------
arch/x86/include/asm/processor.h | 15 +---
arch/x86/include/asm/ptrace.h | 5 +-
arch/x86/include/asm/segment.h | 30 ++------
arch/x86/include/asm/stackprotector.h | 79 ++++------------------
arch/x86/include/asm/suspend_32.h | 6 +--
arch/x86/kernel/asm-offsets_32.c | 5 +-
arch/x86/kernel/cpu/common.c | 5 +-
arch/x86/kernel/doublefault_32.c | 4 +-
arch/x86/kernel/head_32.S | 18 +-----
arch/x86/kernel/setup_percpu.c | 1 +-
arch/x86/kernel/tls.c | 8 +--
arch/x86/lib/insn-eval.c | 4 +-
arch/x86/platform/pvh/head.S | 14 +----
arch/x86/power/cpu.c | 6 +--
arch/x86/xen/enlighten_pv.c | 1 +-
scripts/gcc-x86_32-has-stack-protector.sh | 6 +-
19 files changed, 60 insertions(+), 218 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2792879..10cc619 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -360,10 +360,6 @@ config X86_64_SMP
def_bool y
depends on X86_64 && SMP
-config X86_32_LAZY_GS
- def_bool y
- depends on X86_32 && !STACKPROTECTOR
-
config ARCH_SUPPORTS_UPROBES
def_bool y
@@ -386,7 +382,8 @@ config CC_HAS_SANE_STACKPROTECTOR
default $(success,$(srctree)/scripts/gcc-x86_32-has-stack-protector.sh $(CC))
help
We have to make sure stack protector is unconditionally disabled if
- the compiler produces broken code.
+ the compiler produces broken code or if it does not let us control
+ the segment on 32-bit kernels.
menu "Processor type and features"
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 2d6d5a2..952f534 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -79,6 +79,14 @@ ifeq ($(CONFIG_X86_32),y)
# temporary until string.h is fixed
KBUILD_CFLAGS += -ffreestanding
+
+ ifeq ($(CONFIG_STACKPROTECTOR),y)
+ ifeq ($(CONFIG_SMP),y)
+ KBUILD_CFLAGS += -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard
+ else
+ KBUILD_CFLAGS += -mstack-protector-guard=global
+ endif
+ endif
else
BITS := 64
UTS_MACHINE := x86_64
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index df8c017..eb0cb66 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -20,7 +20,7 @@
* 1C(%esp) - %ds
* 20(%esp) - %es
* 24(%esp) - %fs
- * 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS
+ * 28(%esp) - unused -- was %gs on old stackprotector kernels
* 2C(%esp) - orig_eax
* 30(%esp) - %eip
* 34(%esp) - %cs
@@ -56,14 +56,9 @@
/*
* User gs save/restore
*
- * %gs is used for userland TLS and kernel only uses it for stack
- * canary which is required to be at %gs:20 by gcc. Read the comment
- * at the top of stackprotector.h for more info.
- *
- * Local labels 98 and 99 are used.
+ * This is leftover junk from CONFIG_X86_32_LAZY_GS. A subsequent patch
+ * will remove it entirely.
*/
-#ifdef CONFIG_X86_32_LAZY_GS
-
/* unfortunately push/pop can't be no-op */
.macro PUSH_GS
pushl $0
@@ -86,49 +81,6 @@
.macro SET_KERNEL_GS reg
.endm
-#else /* CONFIG_X86_32_LAZY_GS */
-
-.macro PUSH_GS
- pushl %gs
-.endm
-
-.macro POP_GS pop=0
-98: popl %gs
- .if \pop <> 0
- add $\pop, %esp
- .endif
-.endm
-.macro POP_GS_EX
-.pushsection .fixup, "ax"
-99: movl $0, (%esp)
- jmp 98b
-.popsection
- _ASM_EXTABLE(98b, 99b)
-.endm
-
-.macro PTGS_TO_GS
-98: mov PT_GS(%esp), %gs
-.endm
-.macro PTGS_TO_GS_EX
-.pushsection .fixup, "ax"
-99: movl $0, PT_GS(%esp)
- jmp 98b
-.popsection
- _ASM_EXTABLE(98b, 99b)
-.endm
-
-.macro GS_TO_REG reg
- movl %gs, \reg
-.endm
-.macro REG_TO_PTGS reg
- movl \reg, PT_GS(%esp)
-.endm
-.macro SET_KERNEL_GS reg
- movl $(__KERNEL_STACK_CANARY), \reg
- movl \reg, %gs
-.endm
-
-#endif /* CONFIG_X86_32_LAZY_GS */
/* Unconditionally switch to user cr3 */
.macro SWITCH_TO_USER_CR3 scratch_reg:req
@@ -779,7 +731,7 @@ SYM_CODE_START(__switch_to_asm)
#ifdef CONFIG_STACKPROTECTOR
movl TASK_stack_canary(%edx), %ebx
- movl %ebx, PER_CPU_VAR(stack_canary)+stack_canary_offset
+ movl %ebx, PER_CPU_VAR(__stack_chk_guard)
#endif
#ifdef CONFIG_RETPOLINE
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index dc6d149..bac2a42 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -439,6 +439,9 @@ struct fixed_percpu_data {
* GCC hardcodes the stack canary as %gs:40. Since the
* irq_stack is the object at %gs:0, we reserve the bottom
* 48 bytes of the irq stack for the canary.
+ *
+ * Once we are willing to require -mstack-protector-guard-symbol=
+ * support for x86_64 stackprotector, we can get rid of this.
*/
char gs_base[40];
unsigned long stack_canary;
@@ -460,17 +463,7 @@ extern asmlinkage void ignore_sysret(void);
void current_save_fsgs(void);
#else /* X86_64 */
#ifdef CONFIG_STACKPROTECTOR
-/*
- * Make sure stack canary segment base is cached-aligned:
- * "For Intel Atom processors, avoid non zero segment base address
- * that is not aligned to cache line boundary at all cost."
- * (Optim Ref Manual Assembly/Compiler Coding Rule 15.)
- */
-struct stack_canary {
- char __pad[20]; /* canary at %gs:20 */
- unsigned long canary;
-};
-DECLARE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
+DECLARE_PER_CPU(unsigned long, __stack_chk_guard);
#endif
DECLARE_PER_CPU(struct irq_stack *, hardirq_stack_ptr);
DECLARE_PER_CPU(struct irq_stack *, softirq_stack_ptr);
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index d8324a2..b2c4c12 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -37,7 +37,10 @@ struct pt_regs {
unsigned short __esh;
unsigned short fs;
unsigned short __fsh;
- /* On interrupt, gs and __gsh store the vector number. */
+ /*
+ * On interrupt, gs and __gsh store the vector number. They never
+ * store gs any more.
+ */
unsigned short gs;
unsigned short __gsh;
/* On interrupt, this is the error code. */
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index 7fdd4fa..7204402 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -95,7 +95,7 @@
*
* 26 - ESPFIX small SS
* 27 - per-cpu [ offset to per-cpu data area ]
- * 28 - stack_canary-20 [ for stack protector ] <=== cacheline #8
+ * 28 - unused
* 29 - unused
* 30 - unused
* 31 - TSS for double fault handler
@@ -118,7 +118,6 @@
#define GDT_ENTRY_ESPFIX_SS 26
#define GDT_ENTRY_PERCPU 27
-#define GDT_ENTRY_STACK_CANARY 28
#define GDT_ENTRY_DOUBLEFAULT_TSS 31
@@ -158,12 +157,6 @@
# define __KERNEL_PERCPU 0
#endif
-#ifdef CONFIG_STACKPROTECTOR
-# define __KERNEL_STACK_CANARY (GDT_ENTRY_STACK_CANARY*8)
-#else
-# define __KERNEL_STACK_CANARY 0
-#endif
-
#else /* 64-bit: */
#include <asm/cache.h>
@@ -364,22 +357,15 @@ static inline void __loadsegment_fs(unsigned short value)
asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
/*
- * x86-32 user GS accessors:
+ * x86-32 user GS accessors. This is ugly and could do with some cleaning up.
*/
#ifdef CONFIG_X86_32
-# ifdef CONFIG_X86_32_LAZY_GS
-# define get_user_gs(regs) (u16)({ unsigned long v; savesegment(gs, v); v; })
-# define set_user_gs(regs, v) loadsegment(gs, (unsigned long)(v))
-# define task_user_gs(tsk) ((tsk)->thread.gs)
-# define lazy_save_gs(v) savesegment(gs, (v))
-# define lazy_load_gs(v) loadsegment(gs, (v))
-# else /* X86_32_LAZY_GS */
-# define get_user_gs(regs) (u16)((regs)->gs)
-# define set_user_gs(regs, v) do { (regs)->gs = (v); } while (0)
-# define task_user_gs(tsk) (task_pt_regs(tsk)->gs)
-# define lazy_save_gs(v) do { } while (0)
-# define lazy_load_gs(v) do { } while (0)
-# endif /* X86_32_LAZY_GS */
+# define get_user_gs(regs) (u16)({ unsigned long v; savesegment(gs, v); v; })
+# define set_user_gs(regs, v) loadsegment(gs, (unsigned long)(v))
+# define task_user_gs(tsk) ((tsk)->thread.gs)
+# define lazy_save_gs(v) savesegment(gs, (v))
+# define lazy_load_gs(v) loadsegment(gs, (v))
+# define load_gs_index(v) loadsegment(gs, (v))
#endif /* X86_32 */
#endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index 7fb482f..b6ffe58 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -5,30 +5,23 @@
* Stack protector works by putting predefined pattern at the start of
* the stack frame and verifying that it hasn't been overwritten when
* returning from the function. The pattern is called stack canary
- * and unfortunately gcc requires it to be at a fixed offset from %gs.
- * On x86_64, the offset is 40 bytes and on x86_32 20 bytes. x86_64
- * and x86_32 use segment registers differently and thus handles this
- * requirement differently.
+ * and unfortunately gcc historically required it to be at a fixed offset
+ * from the percpu segment base. On x86_64, the offset is 40 bytes.
*
- * On x86_64, %gs is shared by percpu area and stack canary. All
- * percpu symbols are zero based and %gs points to the base of percpu
- * area. The first occupant of the percpu area is always
- * fixed_percpu_data which contains stack_canary at offset 40. Userland
- * %gs is always saved and restored on kernel entry and exit using
- * swapgs, so stack protector doesn't add any complexity there.
+ * The same segment is shared by percpu area and stack canary. On
+ * x86_64, percpu symbols are zero based and %gs (64-bit) points to the
+ * base of percpu area. The first occupant of the percpu area is always
+ * fixed_percpu_data which contains stack_canary at the approproate
+ * offset. On x86_32, the stack canary is just a regular percpu
+ * variable.
*
- * On x86_32, it's slightly more complicated. As in x86_64, %gs is
- * used for userland TLS. Unfortunately, some processors are much
- * slower at loading segment registers with different value when
- * entering and leaving the kernel, so the kernel uses %fs for percpu
- * area and manages %gs lazily so that %gs is switched only when
- * necessary, usually during task switch.
+ * Putting percpu data in %fs on 32-bit is a minor optimization compared to
+ * using %gs. Since 32-bit userspace normally has %fs == 0, we are likely
+ * to load 0 into %fs on exit to usermode, whereas with percpu data in
+ * %gs, we are likely to load a non-null %gs on return to user mode.
*
- * As gcc requires the stack canary at %gs:20, %gs can't be managed
- * lazily if stack protector is enabled, so the kernel saves and
- * restores userland %gs on kernel entry and exit. This behavior is
- * controlled by CONFIG_X86_32_LAZY_GS and accessors are defined in
- * system.h to hide the details.
+ * Once we are willing to require GCC 8.1 or better for 64-bit stackprotector
+ * support, we can remove some of this complexity.
*/
#ifndef _ASM_STACKPROTECTOR_H
@@ -45,14 +38,6 @@
#include <linux/sched.h>
/*
- * 24 byte read-only segment initializer for stack canary. Linker
- * can't handle the address bit shifting. Address will be set in
- * head_32 for boot CPU and setup_per_cpu_areas() for others.
- */
-#define GDT_STACK_CANARY_INIT \
- [GDT_ENTRY_STACK_CANARY] = GDT_ENTRY_INIT(0x4090, 0, 0x18),
-
-/*
* Initialize the stackprotector canary value.
*
* NOTE: this must only be called from functions that never return
@@ -86,7 +71,7 @@ static __always_inline void boot_init_stack_canary(void)
#ifdef CONFIG_X86_64
this_cpu_write(fixed_percpu_data.stack_canary, canary);
#else
- this_cpu_write(stack_canary.canary, canary);
+ this_cpu_write(__stack_chk_guard, canary);
#endif
}
@@ -95,48 +80,16 @@ static inline void cpu_init_stack_canary(int cpu, struct task_struct *idle)
#ifdef CONFIG_X86_64
per_cpu(fixed_percpu_data.stack_canary, cpu) = idle->stack_canary;
#else
- per_cpu(stack_canary.canary, cpu) = idle->stack_canary;
-#endif
-}
-
-static inline void setup_stack_canary_segment(int cpu)
-{
-#ifdef CONFIG_X86_32
- unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu);
- struct desc_struct *gdt_table = get_cpu_gdt_rw(cpu);
- struct desc_struct desc;
-
- desc = gdt_table[GDT_ENTRY_STACK_CANARY];
- set_desc_base(&desc, canary);
- write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
-#endif
-}
-
-static inline void load_stack_canary_segment(void)
-{
-#ifdef CONFIG_X86_32
- asm("mov %0, %%gs" : : "r" (__KERNEL_STACK_CANARY) : "memory");
+ per_cpu(__stack_chk_guard, cpu) = idle->stack_canary;
#endif
}
#else /* STACKPROTECTOR */
-#define GDT_STACK_CANARY_INIT
-
/* dummy boot_init_stack_canary() is defined in linux/stackprotector.h */
-static inline void setup_stack_canary_segment(int cpu)
-{ }
-
static inline void cpu_init_stack_canary(int cpu, struct task_struct *idle)
{ }
-static inline void load_stack_canary_segment(void)
-{
-#ifdef CONFIG_X86_32
- asm volatile ("mov %0, %%gs" : : "r" (0));
-#endif
-}
-
#endif /* STACKPROTECTOR */
#endif /* _ASM_STACKPROTECTOR_H */
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
index fdbd9d7..7b132d0 100644
--- a/arch/x86/include/asm/suspend_32.h
+++ b/arch/x86/include/asm/suspend_32.h
@@ -13,12 +13,10 @@
/* image of the saved processor state */
struct saved_context {
/*
- * On x86_32, all segment registers, with the possible exception of
- * gs, are saved at kernel entry in pt_regs.
+ * On x86_32, all segment registers except gs are saved at kernel
+ * entry in pt_regs.
*/
-#ifdef CONFIG_X86_32_LAZY_GS
u16 gs;
-#endif
unsigned long cr0, cr2, cr3, cr4;
u64 misc_enable;
bool misc_enable_saved;
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 6e043f2..2b411cd 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -53,11 +53,6 @@ void foo(void)
offsetof(struct cpu_entry_area, tss.x86_tss.sp1) -
offsetofend(struct cpu_entry_area, entry_stack_page.stack));
-#ifdef CONFIG_STACKPROTECTOR
- BLANK();
- OFFSET(stack_canary_offset, stack_canary, canary);
-#endif
-
BLANK();
DEFINE(EFI_svam, offsetof(efi_runtime_services_t, set_virtual_address_map));
}
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index ab640ab..23cb9d6 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -161,7 +161,6 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
[GDT_ENTRY_ESPFIX_SS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
[GDT_ENTRY_PERCPU] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
- GDT_STACK_CANARY_INIT
#endif
} };
EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
@@ -599,7 +598,6 @@ void load_percpu_segment(int cpu)
__loadsegment_simple(gs, 0);
wrmsrl(MSR_GS_BASE, cpu_kernelmode_gs_base(cpu));
#endif
- load_stack_canary_segment();
}
#ifdef CONFIG_X86_32
@@ -1796,7 +1794,8 @@ DEFINE_PER_CPU(unsigned long, cpu_current_top_of_stack) =
EXPORT_PER_CPU_SYMBOL(cpu_current_top_of_stack);
#ifdef CONFIG_STACKPROTECTOR
-DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
+DEFINE_PER_CPU(unsigned long, __stack_chk_guard);
+EXPORT_PER_CPU_SYMBOL(__stack_chk_guard);
#endif
#endif /* CONFIG_X86_64 */
diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c
index 759d392..d1d49e3 100644
--- a/arch/x86/kernel/doublefault_32.c
+++ b/arch/x86/kernel/doublefault_32.c
@@ -100,9 +100,7 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack) = {
.ss = __KERNEL_DS,
.ds = __USER_DS,
.fs = __KERNEL_PERCPU,
-#ifndef CONFIG_X86_32_LAZY_GS
- .gs = __KERNEL_STACK_CANARY,
-#endif
+ .gs = 0,
.__cr3 = __pa_nodebug(swapper_pg_dir),
},
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 7ed84c2..67f5904 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -318,8 +318,8 @@ SYM_FUNC_START(startup_32_smp)
movl $(__KERNEL_PERCPU), %eax
movl %eax,%fs # set this cpu's percpu
- movl $(__KERNEL_STACK_CANARY),%eax
- movl %eax,%gs
+ xorl %eax,%eax
+ movl %eax,%gs # clear possible garbage in %gs
xorl %eax,%eax # Clear LDT
lldt %ax
@@ -339,20 +339,6 @@ SYM_FUNC_END(startup_32_smp)
*/
__INIT
setup_once:
-#ifdef CONFIG_STACKPROTECTOR
- /*
- * Configure the stack canary. The linker can't handle this by
- * relocation. Manually set base address in stack canary
- * segment descriptor.
- */
- movl $gdt_page,%eax
- movl $stack_canary,%ecx
- movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
- shrl $16, %ecx
- movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
- movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
-#endif
-
andl $0,setup_once_ref /* Once is enough, thanks */
ret
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index fd945ce..0941d2f 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -224,7 +224,6 @@ void __init setup_per_cpu_areas(void)
per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
per_cpu(cpu_number, cpu) = cpu;
setup_percpu_segment(cpu);
- setup_stack_canary_segment(cpu);
/*
* Copy data used in early init routines from the
* initial arrays to the per cpu data areas. These
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index 64a496a..3c883e0 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -164,17 +164,11 @@ int do_set_thread_area(struct task_struct *p, int idx,
savesegment(fs, sel);
if (sel == modified_sel)
loadsegment(fs, sel);
-
- savesegment(gs, sel);
- if (sel == modified_sel)
- load_gs_index(sel);
#endif
-#ifdef CONFIG_X86_32_LAZY_GS
savesegment(gs, sel);
if (sel == modified_sel)
- loadsegment(gs, sel);
-#endif
+ load_gs_index(sel);
} else {
#ifdef CONFIG_X86_64
if (p->thread.fsindex == modified_sel)
diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c
index 4229950..7f89a09 100644
--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -404,10 +404,6 @@ static short get_segment_selector(struct pt_regs *regs, int seg_reg_idx)
case INAT_SEG_REG_FS:
return (unsigned short)(regs->fs & 0xffff);
case INAT_SEG_REG_GS:
- /*
- * GS may or may not be in regs as per CONFIG_X86_32_LAZY_GS.
- * The macro below takes care of both cases.
- */
return get_user_gs(regs);
case INAT_SEG_REG_IGNORE:
default:
diff --git a/arch/x86/platform/pvh/head.S b/arch/x86/platform/pvh/head.S
index d2ccadc..b049070 100644
--- a/arch/x86/platform/pvh/head.S
+++ b/arch/x86/platform/pvh/head.S
@@ -46,10 +46,8 @@
#define PVH_GDT_ENTRY_CS 1
#define PVH_GDT_ENTRY_DS 2
-#define PVH_GDT_ENTRY_CANARY 3
#define PVH_CS_SEL (PVH_GDT_ENTRY_CS * 8)
#define PVH_DS_SEL (PVH_GDT_ENTRY_DS * 8)
-#define PVH_CANARY_SEL (PVH_GDT_ENTRY_CANARY * 8)
SYM_CODE_START_LOCAL(pvh_start_xen)
cld
@@ -111,17 +109,6 @@ SYM_CODE_START_LOCAL(pvh_start_xen)
#else /* CONFIG_X86_64 */
- /* Set base address in stack canary descriptor. */
- movl $_pa(gdt_start),%eax
- movl $_pa(canary),%ecx
- movw %cx, (PVH_GDT_ENTRY_CANARY * 8) + 2(%eax)
- shrl $16, %ecx
- movb %cl, (PVH_GDT_ENTRY_CANARY * 8) + 4(%eax)
- movb %ch, (PVH_GDT_ENTRY_CANARY * 8) + 7(%eax)
-
- mov $PVH_CANARY_SEL,%eax
- mov %eax,%gs
-
call mk_early_pgtbl_32
mov $_pa(initial_page_table), %eax
@@ -165,7 +152,6 @@ SYM_DATA_START_LOCAL(gdt_start)
.quad GDT_ENTRY(0xc09a, 0, 0xfffff) /* PVH_CS_SEL */
#endif
.quad GDT_ENTRY(0xc092, 0, 0xfffff) /* PVH_DS_SEL */
- .quad GDT_ENTRY(0x4090, 0, 0x18) /* PVH_CANARY_SEL */
SYM_DATA_END_LABEL(gdt_start, SYM_L_LOCAL, gdt_end)
.balign 16
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index db1378c..ef4329d 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -99,11 +99,8 @@ static void __save_processor_state(struct saved_context *ctxt)
/*
* segment registers
*/
-#ifdef CONFIG_X86_32_LAZY_GS
savesegment(gs, ctxt->gs);
-#endif
#ifdef CONFIG_X86_64
- savesegment(gs, ctxt->gs);
savesegment(fs, ctxt->fs);
savesegment(ds, ctxt->ds);
savesegment(es, ctxt->es);
@@ -232,7 +229,6 @@ static void notrace __restore_processor_state(struct saved_context *ctxt)
wrmsrl(MSR_GS_BASE, ctxt->kernelmode_gs_base);
#else
loadsegment(fs, __KERNEL_PERCPU);
- loadsegment(gs, __KERNEL_STACK_CANARY);
#endif
/* Restore the TSS, RO GDT, LDT, and usermode-relevant MSRs. */
@@ -255,7 +251,7 @@ static void notrace __restore_processor_state(struct saved_context *ctxt)
*/
wrmsrl(MSR_FS_BASE, ctxt->fs_base);
wrmsrl(MSR_KERNEL_GS_BASE, ctxt->usermode_gs_base);
-#elif defined(CONFIG_X86_32_LAZY_GS)
+#else
loadsegment(gs, ctxt->gs);
#endif
diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index dc0a337..33e797b 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1204,7 +1204,6 @@ static void __init xen_setup_gdt(int cpu)
pv_ops.cpu.write_gdt_entry = xen_write_gdt_entry_boot;
pv_ops.cpu.load_gdt = xen_load_gdt_boot;
- setup_stack_canary_segment(cpu);
switch_to_new_gdt(cpu);
pv_ops.cpu.write_gdt_entry = xen_write_gdt_entry;
diff --git a/scripts/gcc-x86_32-has-stack-protector.sh b/scripts/gcc-x86_32-has-stack-protector.sh
index f5c1194..825c75c 100755
--- a/scripts/gcc-x86_32-has-stack-protector.sh
+++ b/scripts/gcc-x86_32-has-stack-protector.sh
@@ -1,4 +1,8 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
-echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m32 -O0 -fstack-protector - -o - 2> /dev/null | grep -q "%gs"
+# This requires GCC 8.1 or better. Specifically, we require
+# -mstack-protector-guard-reg, added by
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81708
+
+echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m32 -O0 -fstack-protector -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard - -o - 2> /dev/null | grep -q "%fs"