[PATCH v4 2/4] mfd: intel-m10-bmc: Simplify the legacy version reg definition

[Xu Yilun]

The version register is the only one in the legacy I/O space to be
accessed, so it is not necessary to define the legacy base & version
register offset. A direct definition of the legacy version register
address would be fine.

Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
Reviewed-by: Tom Rix <trix@xxxxxxxxxx>
---
v3: no change, rebased to 5.12-rc1
v4: improve the comments for valid version check.
---
 drivers/mfd/intel-m10-bmc.c       | 17 +++++++----------
 include/linux/mfd/intel-m10-bmc.h |  2 +-
 2 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c
index 06c9775..90d0448 100644
--- a/drivers/mfd/intel-m10-bmc.c
+++ b/drivers/mfd/intel-m10-bmc.c
@@ -116,17 +116,14 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata)
 	int ret;
 
 	/*
-	 * This check is to filter out the very old legacy BMC versions,
-	 * M10BMC_LEGACY_SYS_BASE is the offset to this old block of mmio
-	 * registers. In the old BMC chips, the BMC version info is stored
-	 * in this old version register (M10BMC_LEGACY_SYS_BASE +
-	 * M10BMC_BUILD_VER), so its read out value would have not been
-	 * LEGACY_INVALID (0xffffffff). But in new BMC chips that the
-	 * driver supports, the value of this register should be
-	 * LEGACY_INVALID.
+	 * This check is to filter out the very old legacy BMC versions. In the
+	 * old BMC chips, the BMC version info is stored in the old version
+	 * register (M10BMC_LEGACY_BUILD_VER), so its read out value would have
+	 * not been M10BMC_VER_LEGACY_INVALID (0xffffffff). But in new BMC
+	 * chips that the driver supports, the value of this register should be
+	 * M10BMC_VER_LEGACY_INVALID.
 	 */
-	ret = m10bmc_raw_read(ddata,
-			      M10BMC_LEGACY_SYS_BASE + M10BMC_BUILD_VER, &v);
+	ret = m10bmc_raw_read(ddata, M10BMC_LEGACY_BUILD_VER, &v);
 	if (ret)
 		return -ENODEV;
 
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index 9b54ca1..4f1071f 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -9,7 +9,7 @@
 
 #include <linux/regmap.h>
 
-#define M10BMC_LEGACY_SYS_BASE		0x300400
+#define M10BMC_LEGACY_BUILD_VER		0x300468
 #define M10BMC_SYS_BASE			0x300800
 #define M10BMC_MEM_END			0x1fffffff
 
-- 
2.7.4