Re: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support

[dillon min]

Hi Alexandre,

Thanks for quickly responding.

On Thu, Mar 11, 2021 at 6:26 PM Alexandre TORGUE
<alexandre.torgue@xxxxxx> wrote:
>
> Hi Dillon
>
> > -----Original Message-----
> > From: dillon min <dillon.minfei@xxxxxxxxx>
> > Sent: mercredi 10 mars 2021 12:48
> > To: Rob Herring <robh+dt@xxxxxxxxxx>; Maxime Coquelin
> > <mcoquelin.stm32@xxxxxxxxx>; Alexandre TORGUE
> > <alexandre.torgue@xxxxxx>; open list:OPEN FIRMWARE AND FLATTENED
> > DEVICE TREE BINDINGS <devicetree@xxxxxxxxxxxxxxx>; linux-stm32@st-md-
> > mailman.stormreply.com; Linux ARM <linux-arm-
> > kernel@xxxxxxxxxxxxxxxxxxx>; Linux Kernel Mailing List <linux-
> > kernel@xxxxxxxxxxxxxxx>; linux@xxxxxxxxxxxxxxx; Vladimir Murzin
> > <vladimir.murzin@xxxxxxx>; afzal.mohd.ma@xxxxxxxxx
> > Subject: Re: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board
> > support
> >
> > for the device tree part , still waiting review. just a gentle ping.
> > if Mr Alexandre torgue can take a look, would be great.
> >
>
> Sorry for the delay. For next versions can you send it to
> Alexandre.torgue@xxxxxxxxxxx please
Okay, I will add your new e-mail address to next review mailing list.
>
> Thanks
> Alex
>
> > thanks,
> >
> > On Wed, Mar 3, 2021 at 4:05 PM <dillon.minfei@xxxxxxxxx> wrote:
> > >
> > > From: dillon min <dillon.minfei@xxxxxxxxx>
> > >
> > > This patchset intend to add art-pi board support, this board developed
> > > by rt-thread(https://www.rt-thread.org/).
> > >
> > > Board resources:
> > >
> > > 8MiB QSPI flash
> > > 16MiB SPI flash
> > > 32MiB SDRAM
> > > AP6212 wifi,bt,fm comb
> > >
> > > sw context:
> > > - as stm32h750 just has 128k bytes internal flash, so running a fw on
> > >   internal flash to download u-boot/kernel to qspi flash, boot
> > >   u-boot/kernel from qspi flash. this fw is based on rt-thread.
> > > - kernel can be xip on qspi flash or load to sdram
> > > - root filesystem is jffs2(created by buildroot), stored on spi flash
> > >
> > > to support the boad, add following changes.
> > > - fix r0-r3, r12 register restore failed after svc call,
> > > - add dts binding
> > > - update yaml doc
> > >
> > > dillon min (8):
> > >   ARM: ARMv7-M: Fix register restore corrupt after svc call
> > >   Documentation: arm: stm32: Add stm32h750 value line
> > >   dt-bindings: arm: stm32: Add compatible strings for ART-PI board
> > >   dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl
> > >   ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x
> > >   ARM: dts: stm32: add stm32h750-pinctrl.dtsi
> > >   ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
> > >   ARM: stm32: add initial support for stm32h750
> > >
> > >  Documentation/arm/index.rst                        |   1 +
> > >  Documentation/arm/stm32/stm32h750-overview.rst     |  33 ++
> > >  .../devicetree/bindings/arm/stm32/stm32.yaml       |   4 +
> > >  .../bindings/pinctrl/st,stm32-pinctrl.yaml         |   1 +
> > >  arch/arm/boot/dts/Makefile                         |   1 +
> > >  arch/arm/boot/dts/stm32h7-pinctrl.dtsi             | 392
> > +++++++++++++++++++++
> > >  arch/arm/boot/dts/stm32h743-pinctrl.dtsi           | 307 +---------------
> > >  arch/arm/boot/dts/stm32h743.dtsi                   |  30 ++
> > >  arch/arm/boot/dts/stm32h750-pinctrl.dtsi           |  11 +
> > >  arch/arm/boot/dts/stm32h750.dtsi                   |   5 +
> > >  arch/arm/boot/dts/stm32h750i-art-pi.dts            | 227 ++++++++++++
> > >  arch/arm/mach-stm32/board-dt.c                     |   1 +
> > >  arch/arm/mm/proc-v7m.S                             |   5 +-
> > >  13 files changed, 716 insertions(+), 302 deletions(-)  create mode
> > > 100644 Documentation/arm/stm32/stm32h750-overview.rst
> > >  create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi
> > >  create mode 100644 arch/arm/boot/dts/stm32h750-pinctrl.dtsi
> > >  create mode 100644 arch/arm/boot/dts/stm32h750.dtsi  create mode
> > > 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts
> > >
> > > --
> > > 2.7.4
> > >