Re: [RESEND PATCH v5 2/4] arm64: dts: rk3399: Add dfi and dmc nodes.

[Daniel Lezcano]

On 09/03/2021 12:42, Johan Jonker wrote:
> Hi Daniel,
> 
> Some comments. Have a look if it's useful or that you disagree with.
> 
> New nodes should be verifiable if possible.
> Especially with so many properties.
> Could you convert rockchip-dfi.txt and rk3399_dmc.txt to yaml instead of
> changing old txt documents?
> Add rockchip-dfi.yaml and rk3399_dmc.yaml before this patch in version 6.

I don't have a lot of bandwidth to do it but I will give a try.

Thanks for reviewing

  -- Daniel

> Nodes and properties have a sort order. Please fix.
> Some goes for [RESEND PATCH v5 3/4].
> 
> (This is a generic dtsi. How about cooling and dmc ??)
> 
> ----
> Heiko rules:
> 
> compatible
> reg
> interrupts
> [alphabetical]
> status [if needed]
> 
> ----
> My incomplete list:
> 
> For nodes:
> If exists on top: model, compatible and chosen.
> Sort things without reg alphabetical first,
> then sort the rest by reg address.
> 
> Inside nodes:
> If exists on top: compatible, reg and interrupts.
> In alphabetical order the required properties.
> Then in alphabetical order the other properties.
> And as last things that start with '#' in alphabetical order.
> Add status below all other properties for soc internal components with
> any board-specifics.
> Keep an empty line between properties and nodes.
> 
> Exceptions:
> Sort pinctrl-0 above pinctrl-names, so it stays in line with clock-names
> and dma-names.
> Sort simple-audio-card,name above other simple-audio-card properties.
> Sort regulator-name above other regulator properties.
> Sort regulator-min-microvolt above regulator-max-microvolt.
> 
> On 3/9/21 12:38 AM, Daniel Lezcano wrote:
>> From: Lin Huang <hl@xxxxxxxxxxxxxx>
>>
>> These are required to support DDR DVFS on rk3399 platform.
>>
>> Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
>> Signed-off-by: Gaël PORTAY <gael.portay@xxxxxxxxxxxxx>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 19 +++++++++++++++++++
>>  1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> index edbbf35fe19e..6f23d99236fe 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -1937,6 +1937,25 @@
>>  		status = "disabled";
>>  	};
>>  
>> +	dfi: dfi@ff630000 {
>> +		reg = <0x00 0xff630000 0x00 0x4000>;
>> +		compatible = "rockchip,rk3399-dfi";
>> +		rockchip,pmu = <&pmugrf>;
>> +		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
>> +		clocks = <&cru PCLK_DDR_MON>;
>> +		clock-names = "pclk_ddr_mon";
>> +		status = "disabled";
>> +	};
>> +
>> +	dmc: dmc {
>> +		compatible = "rockchip,rk3399-dmc";
>> +		rockchip,pmu = <&pmugrf>;
>> +		devfreq-events = <&dfi>;
>> +		clocks = <&cru SCLK_DDRC>;
>> +		clock-names = "dmc_clk";
>> +		status = "disabled";
>> +	};
>> +
>>  	pinctrl: pinctrl {
>>  		compatible = "rockchip,rk3399-pinctrl";
>>  		rockchip,grf = <&grf>;
>>
> 


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog