Re: [PATCH v4 2/2] drm/bridge: anx7625: disable regulators when power off

[Xin Ji]

On Thu, Mar 18, 2021 at 12:26:25PM +0800, Hsin-Yi Wang wrote:
> On Wed, Feb 24, 2021 at 2:14 PM Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> wrote:
> >
> > When suspending the driver, anx7625_power_standby() will be called to
> > turn off reset-gpios and enable-gpios. However, power supplies are not
> > disabled. To save power, the driver can get the power supply regulators
> > and turn off them in anx7625_power_standby().
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> > Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>
> > ---
Hi Hsin-Yi, it's OK for me, please add my r-b.
Reviewed-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>

Thanks,
Xin
> 
> Ping on the thread, thanks.
> 
> >  drivers/gpu/drm/bridge/analogix/anx7625.c | 34 +++++++++++++++++++++++
> >  drivers/gpu/drm/bridge/analogix/anx7625.h |  1 +
> >  2 files changed, 35 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 65cc05982f826..23283ba0c4f93 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -11,6 +11,7 @@
> >  #include <linux/kernel.h>
> >  #include <linux/module.h>
> >  #include <linux/mutex.h>
> > +#include <linux/regulator/consumer.h>
> >  #include <linux/slab.h>
> >  #include <linux/types.h>
> >  #include <linux/workqueue.h>
> > @@ -875,12 +876,25 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
> >  static void anx7625_power_on(struct anx7625_data *ctx)
> >  {
> >         struct device *dev = &ctx->client->dev;
> > +       int ret, i;
> >
> >         if (!ctx->pdata.low_power_mode) {
> >                 DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
> >                 return;
> >         }
> >
> > +       for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) {
> > +               ret = regulator_enable(ctx->pdata.supplies[i].consumer);
> > +               if (ret < 0) {
> > +                       DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n",
> > +                                            i, ret);
> > +                       goto reg_err;
> > +               }
> > +               usleep_range(2000, 2100);
> > +       }
> > +
> > +       usleep_range(4000, 4100);
> > +
> >         /* Power on pin enable */
> >         gpiod_set_value(ctx->pdata.gpio_p_on, 1);
> >         usleep_range(10000, 11000);
> > @@ -889,11 +903,16 @@ static void anx7625_power_on(struct anx7625_data *ctx)
> >         usleep_range(10000, 11000);
> >
> >         DRM_DEV_DEBUG_DRIVER(dev, "power on !\n");
> > +       return;
> > +reg_err:
> > +       for (--i; i >= 0; i--)
> > +               regulator_disable(ctx->pdata.supplies[i].consumer);
> >  }
> >
> >  static void anx7625_power_standby(struct anx7625_data *ctx)
> >  {
> >         struct device *dev = &ctx->client->dev;
> > +       int ret;
> >
> >         if (!ctx->pdata.low_power_mode) {
> >                 DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
> > @@ -904,6 +923,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx)
> >         usleep_range(1000, 1100);
> >         gpiod_set_value(ctx->pdata.gpio_p_on, 0);
> >         usleep_range(1000, 1100);
> > +
> > +       ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
> > +                                    ctx->pdata.supplies);
> > +       if (ret < 0)
> > +               DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret);
> > +
> >         DRM_DEV_DEBUG_DRIVER(dev, "power down\n");
> >  }
> >
> > @@ -1742,6 +1767,15 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> >         platform->client = client;
> >         i2c_set_clientdata(client, platform);
> >
> > +       pdata->supplies[0].supply = "vdd10";
> > +       pdata->supplies[1].supply = "vdd18";
> > +       pdata->supplies[2].supply = "vdd33";
> > +       ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies),
> > +                                     pdata->supplies);
> > +       if (ret) {
> > +               DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret);
> > +               return ret;
> > +       }
> >         anx7625_init_gpio(platform);
> >
> >         atomic_set(&platform->power_status, 0);
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > index 193ad86c54503..e4a086b3a3d7b 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > @@ -350,6 +350,7 @@ struct s_edid_data {
> >  struct anx7625_platform_data {
> >         struct gpio_desc *gpio_p_on;
> >         struct gpio_desc *gpio_reset;
> > +       struct regulator_bulk_data supplies[3];
> >         struct drm_bridge *panel_bridge;
> >         int intp_irq;
> >         u32 low_power_mode;
> > --
> > 2.30.1.766.gb4fecdf3b7-goog
> >