[PATCH 2/2] powerpc/powernv: remove the nvlink support

From: Christoph Hellwig
Date: Mon Mar 22 2021 - 11:06:15 EST

This code was only used by the vfio-nvlink2 code, which itself had no
proper use. Drop this huge chunk of code build into every powernv
or generic build.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
arch/powerpc/include/asm/opal.h | 3 -
arch/powerpc/include/asm/pci-bridge.h | 1 -
arch/powerpc/include/asm/pci.h | 7 -
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/npu-dma.c | 705 ---------------------
arch/powerpc/platforms/powernv/opal-call.c | 2 -
arch/powerpc/platforms/powernv/pci-ioda.c | 185 +-----
arch/powerpc/platforms/powernv/pci.c | 11 -
arch/powerpc/platforms/powernv/pci.h | 17 +-
arch/powerpc/platforms/pseries/pci.c | 23 -
10 files changed, 8 insertions(+), 948 deletions(-)
delete mode 100644 arch/powerpc/platforms/powernv/npu-dma.c

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9986ac34b8e224..06eaa231697344 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -28,9 +28,6 @@ extern struct device_node *opal_node;

/* API functions */
int64_t opal_invalid_call(void);
-int64_t opal_npu_destroy_context(uint64_t phb_id, uint64_t pid, uint64_t bdf);
-int64_t opal_npu_init_context(uint64_t phb_id, int pasid, uint64_t msr,
- uint64_t bdf);
int64_t opal_npu_map_lpar(uint64_t phb_id, uint64_t bdf, uint64_t lparid,
uint64_t lpcr);
int64_t opal_npu_spa_setup(uint64_t phb_id, uint32_t bdfn,
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index d2a2a14e56f91e..74424c14515ce0 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -126,7 +126,6 @@ struct pci_controller {
#endif /* CONFIG_PPC64 */

void *private_data;
- struct npu *npu;
};

/* These are used for config access before all the PCI probing
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 6436f0b41539e3..d1f53260725ca7 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -119,11 +119,4 @@ extern void pcibios_scan_phb(struct pci_controller *hose);

#endif /* __KERNEL__ */

-extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev);
-extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index);
-extern int pnv_npu2_init(struct pci_controller *hose);
-extern int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
- unsigned long msr);
-extern int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev);
-
#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 2eb6ae150d1fd5..be2546b968165e 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
obj-$(CONFIG_FA_DUMP) += opal-fadump.o
obj-$(CONFIG_PRESERVE_FA_DUMP) += opal-fadump.o
obj-$(CONFIG_OPAL_CORE) += opal-core.o
-obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
+obj-$(CONFIG_PCI) += pci.o pci-ioda.o pci-ioda-tce.o
obj-$(CONFIG_PCI_IOV) += pci-sriov.o
obj-$(CONFIG_CXL_BASE) += pci-cxl.o
obj-$(CONFIG_EEH) += eeh-powernv.o
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
deleted file mode 100644
index b711dc3262a308..00000000000000
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ /dev/null
@@ -1,705 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * This file implements the DMA operations for NVLink devices. The NPU
- * devices all point to the same iommu table as the parent PCI device.
- *
- * Copyright Alistair Popple, IBM Corporation 2015.
- */
-
-#include <linux/mmu_notifier.h>
-#include <linux/mmu_context.h>
-#include <linux/of.h>
-#include <linux/pci.h>
-#include <linux/memblock.h>
-#include <linux/sizes.h>
-
-#include <asm/debugfs.h>
-#include <asm/powernv.h>
-#include <asm/ppc-pci.h>
-#include <asm/opal.h>
-
-#include "pci.h"
-
-static struct pci_dev *get_pci_dev(struct device_node *dn)
-{
- struct pci_dn *pdn = PCI_DN(dn);
- struct pci_dev *pdev;
-
- pdev = pci_get_domain_bus_and_slot(pci_domain_nr(pdn->phb->bus),
- pdn->busno, pdn->devfn);
-
- /*
- * pci_get_domain_bus_and_slot() increased the reference count of
- * the PCI device, but callers don't need that actually as the PE
- * already holds a reference to the device. Since callers aren't
- * aware of the reference count change, call pci_dev_put() now to
- * avoid leaks.
- */
- if (pdev)
- pci_dev_put(pdev);
-
- return pdev;
-}
-
-/* Given a NPU device get the associated PCI device. */
-struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev)
-{
- struct device_node *dn;
- struct pci_dev *gpdev;
-
- if (WARN_ON(!npdev))
- return NULL;
-
- if (WARN_ON(!npdev->dev.of_node))
- return NULL;
-
- /* Get assoicated PCI device */
- dn = of_parse_phandle(npdev->dev.of_node, "ibm,gpu", 0);
- if (!dn)
- return NULL;
-
- gpdev = get_pci_dev(dn);
- of_node_put(dn);
-
- return gpdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_gpu_dev);
-
-/* Given the real PCI device get a linked NPU device. */
-struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index)
-{
- struct device_node *dn;
- struct pci_dev *npdev;
-
- if (WARN_ON(!gpdev))
- return NULL;
-
- /* Not all PCI devices have device-tree nodes */
- if (!gpdev->dev.of_node)
- return NULL;
-
- /* Get assoicated PCI device */
- dn = of_parse_phandle(gpdev->dev.of_node, "ibm,npu", index);
- if (!dn)
- return NULL;
-
- npdev = get_pci_dev(dn);
- of_node_put(dn);
-
- return npdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_npu_dev);
-
-#ifdef CONFIG_IOMMU_API
-/*
- * Returns the PE assoicated with the PCI device of the given
- * NPU. Returns the linked pci device if pci_dev != NULL.
- */
-static struct pnv_ioda_pe *get_gpu_pci_dev_and_pe(struct pnv_ioda_pe *npe,
- struct pci_dev **gpdev)
-{
- struct pnv_phb *phb;
- struct pci_controller *hose;
- struct pci_dev *pdev;
- struct pnv_ioda_pe *pe;
- struct pci_dn *pdn;
-
- pdev = pnv_pci_get_gpu_dev(npe->pdev);
- if (!pdev)
- return NULL;
-
- pdn = pci_get_pdn(pdev);
- if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
- return NULL;
-
- hose = pci_bus_to_host(pdev->bus);
- phb = hose->private_data;
- pe = &phb->ioda.pe_array[pdn->pe_number];
-
- if (gpdev)
- *gpdev = pdev;
-
- return pe;
-}
-
-static long pnv_npu_unset_window(struct iommu_table_group *table_group,
- int num);
-
-static long pnv_npu_set_window(struct iommu_table_group *table_group, int num,
- struct iommu_table *tbl)
-{
- struct pnv_ioda_pe *npe = container_of(table_group, struct pnv_ioda_pe,
- table_group);
- struct pnv_phb *phb = npe->phb;
- int64_t rc;
- const unsigned long size = tbl->it_indirect_levels ?
- tbl->it_level_size : tbl->it_size;
- const __u64 start_addr = tbl->it_offset << tbl->it_page_shift;
- const __u64 win_size = tbl->it_size << tbl->it_page_shift;
- int num2 = (num == 0) ? 1 : 0;
-
- /* NPU has just one TVE so if there is another table, remove it first */
- if (npe->table_group.tables[num2])
- pnv_npu_unset_window(&npe->table_group, num2);
-
- pe_info(npe, "Setting up window %llx..%llx pg=%lx\n",
- start_addr, start_addr + win_size - 1,
- IOMMU_PAGE_SIZE(tbl));
-
- rc = opal_pci_map_pe_dma_window(phb->opal_id,
- npe->pe_number,
- npe->pe_number,
- tbl->it_indirect_levels + 1,
- __pa(tbl->it_base),
- size << 3,
- IOMMU_PAGE_SIZE(tbl));
- if (rc) {
- pe_err(npe, "Failed to configure TCE table, err %lld\n", rc);
- return rc;
- }
- pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
- /* Add the table to the list so its TCE cache will get invalidated */
- pnv_pci_link_table_and_group(phb->hose->node, num,
- tbl, &npe->table_group);
-
- return 0;
-}
-
-static long pnv_npu_unset_window(struct iommu_table_group *table_group, int num)
-{
- struct pnv_ioda_pe *npe = container_of(table_group, struct pnv_ioda_pe,
- table_group);
- struct pnv_phb *phb = npe->phb;
- int64_t rc;
-
- if (!npe->table_group.tables[num])
- return 0;
-
- pe_info(npe, "Removing DMA window\n");
-
- rc = opal_pci_map_pe_dma_window(phb->opal_id, npe->pe_number,
- npe->pe_number,
- 0/* levels */, 0/* table address */,
- 0/* table size */, 0/* page size */);
- if (rc) {
- pe_err(npe, "Unmapping failed, ret = %lld\n", rc);
- return rc;
- }
- pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
- pnv_pci_unlink_table_and_group(npe->table_group.tables[num],
- &npe->table_group);
-
- return 0;
-}
-
-/* Switch ownership from platform code to external user (e.g. VFIO) */
-static void pnv_npu_take_ownership(struct iommu_table_group *table_group)
-{
- struct pnv_ioda_pe *npe = container_of(table_group, struct pnv_ioda_pe,
- table_group);
- struct pnv_phb *phb = npe->phb;
- int64_t rc;
- struct pci_dev *gpdev = NULL;
-
- /*
- * Note: NPU has just a single TVE in the hardware which means that
- * while used by the kernel, it can have either 32bit window or
- * DMA bypass but never both. So we deconfigure 32bit window only
- * if it was enabled at the moment of ownership change.
- */
- if (npe->table_group.tables[0]) {
- pnv_npu_unset_window(&npe->table_group, 0);
- return;
- }
-
- /* Disable bypass */
- rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
- npe->pe_number, npe->pe_number,
- 0 /* bypass base */, 0);
- if (rc) {
- pe_err(npe, "Failed to disable bypass, err %lld\n", rc);
- return;
- }
- pnv_pci_ioda2_tce_invalidate_entire(npe->phb, false);
-
- get_gpu_pci_dev_and_pe(npe, &gpdev);
- if (gpdev)
- pnv_npu2_unmap_lpar_dev(gpdev);
-}
-
-static void pnv_npu_release_ownership(struct iommu_table_group *table_group)
-{
- struct pnv_ioda_pe *npe = container_of(table_group, struct pnv_ioda_pe,
- table_group);
- struct pci_dev *gpdev = NULL;
-
- get_gpu_pci_dev_and_pe(npe, &gpdev);
- if (gpdev)
- pnv_npu2_map_lpar_dev(gpdev, 0, MSR_DR | MSR_PR | MSR_HV);
-}
-
-static struct iommu_table_group_ops pnv_pci_npu_ops = {
- .set_window = pnv_npu_set_window,
- .unset_window = pnv_npu_unset_window,
- .take_ownership = pnv_npu_take_ownership,
- .release_ownership = pnv_npu_release_ownership,
-};
-#endif /* !CONFIG_IOMMU_API */
-
-/*
- * NPU2 ATS
- */
-/* Maximum possible number of ATSD MMIO registers per NPU */
-#define NV_NMMU_ATSD_REGS 8
-#define NV_NPU_MAX_PE_NUM 16
-
-/*
- * A compound NPU IOMMU group which might consist of 1 GPU + 2xNPUs (POWER8) or
- * up to 3 x (GPU + 2xNPUs) (POWER9).
- */
-struct npu_comp {
- struct iommu_table_group table_group;
- int pe_num;
- struct pnv_ioda_pe *pe[NV_NPU_MAX_PE_NUM];
-};
-
-/* An NPU descriptor, valid for POWER9 only */
-struct npu {
- int index;
- struct npu_comp npucomp;
-};
-
-#ifdef CONFIG_IOMMU_API
-static long pnv_npu_peers_create_table_userspace(
- struct iommu_table_group *table_group,
- int num, __u32 page_shift, __u64 window_size, __u32 levels,
- struct iommu_table **ptbl)
-{
- struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
- table_group);
-
- if (!npucomp->pe_num || !npucomp->pe[0] ||
- !npucomp->pe[0]->table_group.ops ||
- !npucomp->pe[0]->table_group.ops->create_table)
- return -EFAULT;
-
- return npucomp->pe[0]->table_group.ops->create_table(
- &npucomp->pe[0]->table_group, num, page_shift,
- window_size, levels, ptbl);
-}
-
-static long pnv_npu_peers_set_window(struct iommu_table_group *table_group,
- int num, struct iommu_table *tbl)
-{
- int i, j;
- long ret = 0;
- struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
- table_group);
-
- for (i = 0; i < npucomp->pe_num; ++i) {
- struct pnv_ioda_pe *pe = npucomp->pe[i];
-
- if (!pe->table_group.ops->set_window)
- continue;
-
- ret = pe->table_group.ops->set_window(&pe->table_group,
- num, tbl);
- if (ret)
- break;
- }
-
- if (ret) {
- for (j = 0; j < i; ++j) {
- struct pnv_ioda_pe *pe = npucomp->pe[j];
-
- if (!pe->table_group.ops->unset_window)
- continue;
-
- ret = pe->table_group.ops->unset_window(
- &pe->table_group, num);
- if (ret)
- break;
- }
- } else {
- table_group->tables[num] = iommu_tce_table_get(tbl);
- }
-
- return ret;
-}
-
-static long pnv_npu_peers_unset_window(struct iommu_table_group *table_group,
- int num)
-{
- int i, j;
- long ret = 0;
- struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
- table_group);
-
- for (i = 0; i < npucomp->pe_num; ++i) {
- struct pnv_ioda_pe *pe = npucomp->pe[i];
-
- WARN_ON(npucomp->table_group.tables[num] !=
- table_group->tables[num]);
- if (!npucomp->table_group.tables[num])
- continue;
-
- if (!pe->table_group.ops->unset_window)
- continue;
-
- ret = pe->table_group.ops->unset_window(&pe->table_group, num);
- if (ret)
- break;
- }
-
- if (ret) {
- for (j = 0; j < i; ++j) {
- struct pnv_ioda_pe *pe = npucomp->pe[j];
-
- if (!npucomp->table_group.tables[num])
- continue;
-
- if (!pe->table_group.ops->set_window)
- continue;
-
- ret = pe->table_group.ops->set_window(&pe->table_group,
- num, table_group->tables[num]);
- if (ret)
- break;
- }
- } else if (table_group->tables[num]) {
- iommu_tce_table_put(table_group->tables[num]);
- table_group->tables[num] = NULL;
- }
-
- return ret;
-}
-
-static void pnv_npu_peers_take_ownership(struct iommu_table_group *table_group)
-{
- int i;
- struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
- table_group);
-
- for (i = 0; i < npucomp->pe_num; ++i) {
- struct pnv_ioda_pe *pe = npucomp->pe[i];
-
- if (!pe->table_group.ops ||
- !pe->table_group.ops->take_ownership)
- continue;
- pe->table_group.ops->take_ownership(&pe->table_group);
- }
-}
-
-static void pnv_npu_peers_release_ownership(
- struct iommu_table_group *table_group)
-{
- int i;
- struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
- table_group);
-
- for (i = 0; i < npucomp->pe_num; ++i) {
- struct pnv_ioda_pe *pe = npucomp->pe[i];
-
- if (!pe->table_group.ops ||
- !pe->table_group.ops->release_ownership)
- continue;
- pe->table_group.ops->release_ownership(&pe->table_group);
- }
-}
-
-static struct iommu_table_group_ops pnv_npu_peers_ops = {
- .get_table_size = pnv_pci_ioda2_get_table_size,
- .create_table = pnv_npu_peers_create_table_userspace,
- .set_window = pnv_npu_peers_set_window,
- .unset_window = pnv_npu_peers_unset_window,
- .take_ownership = pnv_npu_peers_take_ownership,
- .release_ownership = pnv_npu_peers_release_ownership,
-};
-
-static void pnv_comp_attach_table_group(struct npu_comp *npucomp,
- struct pnv_ioda_pe *pe)
-{
- if (WARN_ON(npucomp->pe_num == NV_NPU_MAX_PE_NUM))
- return;
-
- npucomp->pe[npucomp->pe_num] = pe;
- ++npucomp->pe_num;
-}
-
-static struct iommu_table_group *
- pnv_try_setup_npu_table_group(struct pnv_ioda_pe *pe)
-{
- struct iommu_table_group *compound_group;
- struct npu_comp *npucomp;
- struct pci_dev *gpdev = NULL;
- struct pci_controller *hose;
- struct pci_dev *npdev = NULL;
-
- list_for_each_entry(gpdev, &pe->pbus->devices, bus_list) {
- npdev = pnv_pci_get_npu_dev(gpdev, 0);
- if (npdev)
- break;
- }
-
- if (!npdev)
- /* It is not an NPU attached device, skip */
- return NULL;
-
- hose = pci_bus_to_host(npdev->bus);
-
- if (hose->npu) {
- /* P9 case: compound group is per-NPU (all gpus, all links) */
- npucomp = &hose->npu->npucomp;
- } else {
- /* P8 case: Compound group is per-GPU (1 gpu, 2 links) */
- npucomp = pe->npucomp = kzalloc(sizeof(*npucomp), GFP_KERNEL);
- }
-
- compound_group = &npucomp->table_group;
- if (!compound_group->group) {
- compound_group->ops = &pnv_npu_peers_ops;
- iommu_register_group(compound_group, hose->global_number,
- pe->pe_number);
-
- /* Steal capabilities from a GPU PE */
- compound_group->max_dynamic_windows_supported =
- pe->table_group.max_dynamic_windows_supported;
- compound_group->tce32_start = pe->table_group.tce32_start;
- compound_group->tce32_size = pe->table_group.tce32_size;
- compound_group->max_levels = pe->table_group.max_levels;
- if (!compound_group->pgsizes)
- compound_group->pgsizes = pe->table_group.pgsizes;
- }
-
- /*
- * The gpu would have been added to the iommu group that's created
- * for the PE. Pull it out now.
- */
- iommu_del_device(&gpdev->dev);
-
- /*
- * I'm not sure this is strictly required, but it's probably a good idea
- * since the table_group for the PE is going to be attached to the
- * compound table group. If we leave the PE's iommu group active then
- * we might have the same table_group being modifiable via two sepeate
- * iommu groups.
- */
- iommu_group_put(pe->table_group.group);
-
- /* now put the GPU into the compound group */
- pnv_comp_attach_table_group(npucomp, pe);
- iommu_add_device(compound_group, &gpdev->dev);
-
- return compound_group;
-}
-
-static struct iommu_table_group *pnv_npu_compound_attach(struct pnv_ioda_pe *pe)
-{
- struct iommu_table_group *table_group;
- struct npu_comp *npucomp;
- struct pci_dev *gpdev = NULL;
- struct pci_dev *npdev;
- struct pnv_ioda_pe *gpe = get_gpu_pci_dev_and_pe(pe, &gpdev);
-
- WARN_ON(!(pe->flags & PNV_IODA_PE_DEV));
- if (!gpe)
- return NULL;
-
- /*
- * IODA2 bridges get this set up from pci_controller_ops::setup_bridge
- * but NPU bridges do not have this hook defined so we do it here.
- * We do not setup other table group parameters as they won't be used
- * anyway - NVLink bridges are subordinate PEs.
- */
- pe->table_group.ops = &pnv_pci_npu_ops;
-
- table_group = iommu_group_get_iommudata(
- iommu_group_get(&gpdev->dev));
-
- /*
- * On P9 NPU PHB and PCI PHB support different page sizes,
- * keep only matching. We expect here that NVLink bridge PE pgsizes is
- * initialized by the caller.
- */
- table_group->pgsizes &= pe->table_group.pgsizes;
- npucomp = container_of(table_group, struct npu_comp, table_group);
- pnv_comp_attach_table_group(npucomp, pe);
-
- list_for_each_entry(npdev, &pe->phb->hose->bus->devices, bus_list) {
- struct pci_dev *gpdevtmp = pnv_pci_get_gpu_dev(npdev);
-
- if (gpdevtmp != gpdev)
- continue;
-
- iommu_add_device(table_group, &npdev->dev);
- }
-
- return table_group;
-}
-
-void pnv_pci_npu_setup_iommu_groups(void)
-{
- struct pci_controller *hose;
- struct pnv_phb *phb;
- struct pnv_ioda_pe *pe;
-
- /*
- * For non-nvlink devices the IOMMU group is registered when the PE is
- * configured and devices are added to the group when the per-device
- * DMA setup is run. That's done in hose->ops.dma_dev_setup() which is
- * only initialise for "normal" IODA PHBs.
- *
- * For NVLink devices we need to ensure the NVLinks and the GPU end up
- * in the same IOMMU group, so that's handled here.
- */
- list_for_each_entry(hose, &hose_list, list_node) {
- phb = hose->private_data;
-
- if (phb->type == PNV_PHB_IODA2)
- list_for_each_entry(pe, &phb->ioda.pe_list, list)
- pnv_try_setup_npu_table_group(pe);
- }
-
- /*
- * Now we have all PHBs discovered, time to add NPU devices to
- * the corresponding IOMMU groups.
- */
- list_for_each_entry(hose, &hose_list, list_node) {
- unsigned long pgsizes;
-
- phb = hose->private_data;
-
- if (phb->type != PNV_PHB_NPU_NVLINK)
- continue;
-
- pgsizes = pnv_ioda_parse_tce_sizes(phb);
- list_for_each_entry(pe, &phb->ioda.pe_list, list) {
- /*
- * IODA2 bridges get this set up from
- * pci_controller_ops::setup_bridge but NPU bridges
- * do not have this hook defined so we do it here.
- */
- pe->table_group.pgsizes = pgsizes;
- pnv_npu_compound_attach(pe);
- }
- }
-}
-#endif /* CONFIG_IOMMU_API */
-
-int pnv_npu2_init(struct pci_controller *hose)
-{
- static int npu_index;
- struct npu *npu;
- int ret;
-
- npu = kzalloc(sizeof(*npu), GFP_KERNEL);
- if (!npu)
- return -ENOMEM;
-
- npu_index++;
- if (WARN_ON(npu_index >= NV_MAX_NPUS)) {
- ret = -ENOSPC;
- goto fail_exit;
- }
- npu->index = npu_index;
- hose->npu = npu;
-
- return 0;
-
-fail_exit:
- kfree(npu);
- return ret;
-}
-
-int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
- unsigned long msr)
-{
- int ret;
- struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
- struct pci_controller *hose;
- struct pnv_phb *nphb;
-
- if (!npdev)
- return -ENODEV;
-
- hose = pci_bus_to_host(npdev->bus);
- if (hose->npu == NULL) {
- dev_info_once(&npdev->dev, "Nvlink1 does not support contexts");
- return 0;
- }
-
- nphb = hose->private_data;
-
- dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu lparid=%u\n",
- nphb->opal_id, lparid);
- /*
- * Currently we only support radix and non-zero LPCR only makes sense
- * for hash tables so skiboot expects the LPCR parameter to be a zero.
- */
- ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), lparid,
- 0 /* LPCR bits */);
- if (ret) {
- dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
- return ret;
- }
-
- dev_dbg(&gpdev->dev, "init context opalid=%llu msr=%lx\n",
- nphb->opal_id, msr);
- ret = opal_npu_init_context(nphb->opal_id, 0/*__unused*/, msr,
- pci_dev_id(gpdev));
- if (ret < 0)
- dev_err(&gpdev->dev, "Failed to init context: %d\n", ret);
- else
- ret = 0;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pnv_npu2_map_lpar_dev);
-
-void pnv_npu2_map_lpar(struct pnv_ioda_pe *gpe, unsigned long msr)
-{
- struct pci_dev *gpdev;
-
- list_for_each_entry(gpdev, &gpe->pbus->devices, bus_list)
- pnv_npu2_map_lpar_dev(gpdev, 0, msr);
-}
-
-int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev)
-{
- int ret;
- struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
- struct pci_controller *hose;
- struct pnv_phb *nphb;
-
- if (!npdev)
- return -ENODEV;
-
- hose = pci_bus_to_host(npdev->bus);
- if (hose->npu == NULL) {
- dev_info_once(&npdev->dev, "Nvlink1 does not support contexts");
- return 0;
- }
-
- nphb = hose->private_data;
-
- dev_dbg(&gpdev->dev, "destroy context opalid=%llu\n",
- nphb->opal_id);
- ret = opal_npu_destroy_context(nphb->opal_id, 0/*__unused*/,
- pci_dev_id(gpdev));
- if (ret < 0) {
- dev_err(&gpdev->dev, "Failed to destroy context: %d\n", ret);
- return ret;
- }
-
- /* Set LPID to 0 anyway, just to be safe */
- dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu lparid=0\n", nphb->opal_id);
- ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), 0 /*LPID*/,
- 0 /* LPCR bits */);
- if (ret)
- dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(pnv_npu2_unmap_lpar_dev);
diff --git a/arch/powerpc/platforms/powernv/opal-call.c b/arch/powerpc/platforms/powernv/opal-call.c
index 5cd0f52d258f64..01401e3da7ca14 100644
--- a/arch/powerpc/platforms/powernv/opal-call.c
+++ b/arch/powerpc/platforms/powernv/opal-call.c
@@ -267,8 +267,6 @@ OPAL_CALL(opal_xive_get_queue_state, OPAL_XIVE_GET_QUEUE_STATE);
OPAL_CALL(opal_xive_set_queue_state, OPAL_XIVE_SET_QUEUE_STATE);
OPAL_CALL(opal_xive_get_vp_state, OPAL_XIVE_GET_VP_STATE);
OPAL_CALL(opal_signal_system_reset, OPAL_SIGNAL_SYSTEM_RESET);
-OPAL_CALL(opal_npu_init_context, OPAL_NPU_INIT_CONTEXT);
-OPAL_CALL(opal_npu_destroy_context, OPAL_NPU_DESTROY_CONTEXT);
OPAL_CALL(opal_npu_map_lpar, OPAL_NPU_MAP_LPAR);
OPAL_CALL(opal_imc_counters_init, OPAL_IMC_COUNTERS_INIT);
OPAL_CALL(opal_imc_counters_start, OPAL_IMC_COUNTERS_START);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index f0f901683a2fe1..5c88d7145a23e0 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -47,8 +47,7 @@
#define PNV_IODA1_M64_SEGS 8 /* Segments per M64 BAR */
#define PNV_IODA1_DMA32_SEGSIZE 0x10000000

-static const char * const pnv_phb_names[] = { "IODA1", "IODA2", "NPU_NVLINK",
- "NPU_OCAPI" };
+static const char * const pnv_phb_names[] = { "IODA1", "IODA2", "NPU_OCAPI" };

static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable);
static void pnv_pci_configure_bus(struct pci_bus *bus);
@@ -192,8 +191,6 @@ void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
unsigned int pe_num = pe->pe_number;

WARN_ON(pe->pdev);
- WARN_ON(pe->npucomp); /* NPUs for nvlink are not supposed to be freed */
- kfree(pe->npucomp);
memset(pe, 0, sizeof(struct pnv_ioda_pe));

mutex_lock(&phb->ioda.pe_alloc_mutex);
@@ -875,7 +872,7 @@ int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
* Release from all parents PELT-V. NPUs don't have a PELTV
* table
*/
- if (phb->type != PNV_PHB_NPU_NVLINK && phb->type != PNV_PHB_NPU_OCAPI)
+ if (phb->type != PNV_PHB_NPU_OCAPI)
pnv_ioda_unset_peltv(phb, pe, parent);

rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
@@ -946,7 +943,7 @@ int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
* Configure PELTV. NPUs don't have a PELTV table so skip
* configuration on them.
*/
- if (phb->type != PNV_PHB_NPU_NVLINK && phb->type != PNV_PHB_NPU_OCAPI)
+ if (phb->type != PNV_PHB_NPU_OCAPI)
pnv_ioda_set_peltv(phb, pe, true);

/* Setup reverse map */
@@ -1002,8 +999,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)

/* NOTE: We don't get a reference for the pointer in the PE
* data structure, both the device and PE structures should be
- * destroyed at the same time. However, removing nvlink
- * devices will need some work.
+ * destroyed at the same time.
*
* At some point we want to remove the PDN completely anyways
*/
@@ -1099,113 +1095,6 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
return pe;
}

-static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
-{
- int pe_num, found_pe = false, rc;
- long rid;
- struct pnv_ioda_pe *pe;
- struct pci_dev *gpu_pdev;
- struct pci_dn *npu_pdn;
- struct pnv_phb *phb = pci_bus_to_pnvhb(npu_pdev->bus);
-
- /*
- * Intentionally leak a reference on the npu device (for
- * nvlink only; this is not an opencapi path) to make sure it
- * never goes away, as it's been the case all along and some
- * work is needed otherwise.
- */
- pci_dev_get(npu_pdev);
-
- /*
- * Due to a hardware errata PE#0 on the NPU is reserved for
- * error handling. This means we only have three PEs remaining
- * which need to be assigned to four links, implying some
- * links must share PEs.
- *
- * To achieve this we assign PEs such that NPUs linking the
- * same GPU get assigned the same PE.
- */
- gpu_pdev = pnv_pci_get_gpu_dev(npu_pdev);
- for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) {
- pe = &phb->ioda.pe_array[pe_num];
- if (!pe->pdev)
- continue;
-
- if (pnv_pci_get_gpu_dev(pe->pdev) == gpu_pdev) {
- /*
- * This device has the same peer GPU so should
- * be assigned the same PE as the existing
- * peer NPU.
- */
- dev_info(&npu_pdev->dev,
- "Associating to existing PE %x\n", pe_num);
- npu_pdn = pci_get_pdn(npu_pdev);
- rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
- npu_pdn->pe_number = pe_num;
- phb->ioda.pe_rmap[rid] = pe->pe_number;
- pe->device_count++;
-
- /* Map the PE to this link */
- rc = opal_pci_set_pe(phb->opal_id, pe_num, rid,
- OpalPciBusAll,
- OPAL_COMPARE_RID_DEVICE_NUMBER,
- OPAL_COMPARE_RID_FUNCTION_NUMBER,
- OPAL_MAP_PE);
- WARN_ON(rc != OPAL_SUCCESS);
- found_pe = true;
- break;
- }
- }
-
- if (!found_pe)
- /*
- * Could not find an existing PE so allocate a new
- * one.
- */
- return pnv_ioda_setup_dev_PE(npu_pdev);
- else
- return pe;
-}
-
-static void pnv_ioda_setup_npu_PEs(struct pci_bus *bus)
-{
- struct pci_dev *pdev;
-
- list_for_each_entry(pdev, &bus->devices, bus_list)
- pnv_ioda_setup_npu_PE(pdev);
-}
-
-static void pnv_pci_ioda_setup_nvlink(void)
-{
- struct pci_controller *hose;
- struct pnv_phb *phb;
- struct pnv_ioda_pe *pe;
-
- list_for_each_entry(hose, &hose_list, list_node) {
- phb = hose->private_data;
- if (phb->type == PNV_PHB_NPU_NVLINK) {
- /* PE#0 is needed for error reporting */
- pnv_ioda_reserve_pe(phb, 0);
- pnv_ioda_setup_npu_PEs(hose->bus);
- if (phb->model == PNV_PHB_MODEL_NPU2)
- WARN_ON_ONCE(pnv_npu2_init(hose));
- }
- }
- list_for_each_entry(hose, &hose_list, list_node) {
- phb = hose->private_data;
- if (phb->type != PNV_PHB_IODA2)
- continue;
-
- list_for_each_entry(pe, &phb->ioda.pe_list, list)
- pnv_npu2_map_lpar(pe, MSR_DR | MSR_PR | MSR_HV);
- }
-
-#ifdef CONFIG_IOMMU_API
- /* setup iommu groups so we can do nvlink pass-thru */
- pnv_pci_npu_setup_iommu_groups();
-#endif
-}
-
static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
struct pnv_ioda_pe *pe);

@@ -1468,18 +1357,6 @@ static struct iommu_table_ops pnv_ioda1_iommu_ops = {
#define PHB3_TCE_KILL_INVAL_PE PPC_BIT(1)
#define PHB3_TCE_KILL_INVAL_ONE PPC_BIT(2)

-static void pnv_pci_phb3_tce_invalidate_entire(struct pnv_phb *phb, bool rm)
-{
- __be64 __iomem *invalidate = pnv_ioda_get_inval_reg(phb, rm);
- const unsigned long val = PHB3_TCE_KILL_INVAL_ALL;
-
- mb(); /* Ensure previous TCE table stores are visible */
- if (rm)
- __raw_rm_writeq_be(val, invalidate);
- else
- __raw_writeq_be(val, invalidate);
-}
-
static inline void pnv_pci_phb3_tce_invalidate_pe(struct pnv_ioda_pe *pe)
{
/* 01xb - invalidate TCEs that match the specified PE# */
@@ -1539,20 +1416,6 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
struct pnv_phb *phb = pe->phb;
unsigned int shift = tbl->it_page_shift;

- /*
- * NVLink1 can use the TCE kill register directly as
- * it's the same as PHB3. NVLink2 is different and
- * should go via the OPAL call.
- */
- if (phb->model == PNV_PHB_MODEL_NPU) {
- /*
- * The NVLink hardware does not support TCE kill
- * per TCE entry so we have to invalidate
- * the entire cache for it.
- */
- pnv_pci_phb3_tce_invalidate_entire(phb, rm);
- continue;
- }
if (phb->model == PNV_PHB_MODEL_PHB3 && phb->regs)
pnv_pci_phb3_tce_invalidate(pe, rm, shift,
index, npages);
@@ -1564,14 +1427,6 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
}
}

-void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm)
-{
- if (phb->model == PNV_PHB_MODEL_NPU || phb->model == PNV_PHB_MODEL_PHB3)
- pnv_pci_phb3_tce_invalidate_entire(phb, rm);
- else
- opal_pci_tce_kill(phb->opal_id, OPAL_PCI_TCE_KILL, 0, 0, 0, 0);
-}
-
static int pnv_ioda2_tce_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
@@ -2450,7 +2305,6 @@ static void pnv_pci_enable_bridges(void)

static void pnv_pci_ioda_fixup(void)
{
- pnv_pci_ioda_setup_nvlink();
pnv_pci_ioda_create_dbgfs();

pnv_pci_enable_bridges();
@@ -2823,15 +2677,6 @@ static void pnv_pci_release_device(struct pci_dev *pdev)
pnv_ioda_release_pe(pe);
}

-static void pnv_npu_disable_device(struct pci_dev *pdev)
-{
- struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
- struct eeh_pe *eehpe = edev ? edev->pe : NULL;
-
- if (eehpe && eeh_ops && eeh_ops->reset)
- eeh_ops->reset(eehpe, EEH_RESET_HOT);
-}
-
static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
{
struct pnv_phb *phb = hose->private_data;
@@ -2873,16 +2718,6 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
.shutdown = pnv_pci_ioda_shutdown,
};

-static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
- .setup_msi_irqs = pnv_setup_msi_irqs,
- .teardown_msi_irqs = pnv_teardown_msi_irqs,
- .enable_device_hook = pnv_pci_enable_device_hook,
- .window_alignment = pnv_pci_window_alignment,
- .reset_secondary_bus = pnv_pci_reset_secondary_bus,
- .shutdown = pnv_pci_ioda_shutdown,
- .disable_device = pnv_npu_disable_device,
-};
-
static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
.enable_device_hook = pnv_ocapi_enable_device_hook,
.release_device = pnv_pci_release_device,
@@ -2956,10 +2791,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
phb->model = PNV_PHB_MODEL_P7IOC;
else if (of_device_is_compatible(np, "ibm,power8-pciex"))
phb->model = PNV_PHB_MODEL_PHB3;
- else if (of_device_is_compatible(np, "ibm,power8-npu-pciex"))
- phb->model = PNV_PHB_MODEL_NPU;
- else if (of_device_is_compatible(np, "ibm,power9-npu-pciex"))
- phb->model = PNV_PHB_MODEL_NPU2;
else
phb->model = PNV_PHB_MODEL_UNKNOWN;

@@ -3117,9 +2948,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;

switch (phb->type) {
- case PNV_PHB_NPU_NVLINK:
- hose->controller_ops = pnv_npu_ioda_controller_ops;
- break;
case PNV_PHB_NPU_OCAPI:
hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
break;
@@ -3172,11 +3000,6 @@ void __init pnv_pci_init_ioda2_phb(struct device_node *np)
pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
}

-void __init pnv_pci_init_npu_phb(struct device_node *np)
-{
- pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_NVLINK);
-}
-
void __init pnv_pci_init_npu2_opencapi_phb(struct device_node *np)
{
pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_OCAPI);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 9b9bca169275a8..b18468dc31ff5b 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -926,17 +926,6 @@ void __init pnv_pci_init(void)
for_each_compatible_node(np, NULL, "ibm,ioda3-phb")
pnv_pci_init_ioda2_phb(np);

- /* Look for NPU PHBs */
- for_each_compatible_node(np, NULL, "ibm,ioda2-npu-phb")
- pnv_pci_init_npu_phb(np);
-
- /*
- * Look for NPU2 PHBs which we treat mostly as NPU PHBs with
- * the exception of TCE kill which requires an OPAL call.
- */
- for_each_compatible_node(np, NULL, "ibm,ioda2-npu2-phb")
- pnv_pci_init_npu_phb(np);
-
/* Look for NPU2 OpenCAPI PHBs */
for_each_compatible_node(np, NULL, "ibm,ioda2-npu2-opencapi-phb")
pnv_pci_init_npu2_opencapi_phb(np);
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 36d22920f5a3cb..c8d4f222a86fe3 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -10,10 +10,9 @@
struct pci_dn;

enum pnv_phb_type {
- PNV_PHB_IODA1 = 0,
- PNV_PHB_IODA2 = 1,
- PNV_PHB_NPU_NVLINK = 2,
- PNV_PHB_NPU_OCAPI = 3,
+ PNV_PHB_IODA1,
+ PNV_PHB_IODA2,
+ PNV_PHB_NPU_OCAPI,
};

/* Precise PHB model for error management */
@@ -21,8 +20,6 @@ enum pnv_phb_model {
PNV_PHB_MODEL_UNKNOWN,
PNV_PHB_MODEL_P7IOC,
PNV_PHB_MODEL_PHB3,
- PNV_PHB_MODEL_NPU,
- PNV_PHB_MODEL_NPU2,
};

#define PNV_PCI_DIAG_BUF_SIZE 8192
@@ -81,7 +78,6 @@ struct pnv_ioda_pe {

/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
struct iommu_table_group table_group;
- struct npu_comp *npucomp;

/* 64-bit TCE bypass region */
bool tce_bypass_enabled;
@@ -289,9 +285,7 @@ extern struct iommu_table *pnv_pci_table_alloc(int nid);

extern void pnv_pci_init_ioda_hub(struct device_node *np);
extern void pnv_pci_init_ioda2_phb(struct device_node *np);
-extern void pnv_pci_init_npu_phb(struct device_node *np);
extern void pnv_pci_init_npu2_opencapi_phb(struct device_node *np);
-extern void pnv_npu2_map_lpar(struct pnv_ioda_pe *gpe, unsigned long msr);
extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);

@@ -314,11 +308,6 @@ extern void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
#define pe_info(pe, fmt, ...) \
pe_level_printk(pe, KERN_INFO, fmt, ##__VA_ARGS__)

-/* Nvlink functions */
-extern void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass);
-extern void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm);
-extern void pnv_pci_npu_setup_iommu_groups(void);
-
/* pci-ioda-tce.c */
#define POWERNV_IOMMU_DEFAULT_LEVELS 2
#define POWERNV_IOMMU_MAX_LEVELS 5
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 1bffbd1c9a94b1..3b6800f774c241 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -224,8 +224,6 @@ static void __init pSeries_request_regions(void)

void __init pSeries_final_fixup(void)
{
- struct pci_controller *hose;
-
pSeries_request_regions();

eeh_show_enabled();
@@ -234,27 +232,6 @@ void __init pSeries_final_fixup(void)
ppc_md.pcibios_sriov_enable = pseries_pcibios_sriov_enable;
ppc_md.pcibios_sriov_disable = pseries_pcibios_sriov_disable;
#endif
- list_for_each_entry(hose, &hose_list, list_node) {
- struct device_node *dn = hose->dn, *nvdn;
-
- while (1) {
- dn = of_find_all_nodes(dn);
- if (!dn)
- break;
- nvdn = of_parse_phandle(dn, "ibm,nvlink", 0);
- if (!nvdn)
- continue;
- if (!of_device_is_compatible(nvdn, "ibm,npu-link"))
- continue;
- if (!of_device_is_compatible(nvdn->parent,
- "ibm,power9-npu"))
- continue;
-#ifdef CONFIG_PPC_POWERNV
- WARN_ON_ONCE(pnv_npu2_init(hose));
-#endif
- break;
- }
- }
}

/*
--
2.30.1