[PATCH] backlight: journada720: fix Wmisleading-indentation warning

[Arnd Bergmann]

From: Arnd Bergmann <arnd@xxxxxxxx>

With gcc-11, we get a warning about code that looks correct
but badly indented:

drivers/video/backlight/jornada720_bl.c: In function ‘jornada_bl_update_status’:
drivers/video/backlight/jornada720_bl.c:66:11: error: this ‘else’ clause does not guard... [-Werror=misleading-indentation]
   66 |         } else  /* turn on backlight */
      |           ^~~~

Change the formatting according to our normal conventions.

Fixes: 13a7b5dc0d17 ("backlight: Adds HP Jornada 700 series backlight driver")
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/video/backlight/jornada720_bl.c | 44 ++++++++++++-------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c
index 996f7ba3b373..066d0dc98f60 100644
--- a/drivers/video/backlight/jornada720_bl.c
+++ b/drivers/video/backlight/jornada720_bl.c
@@ -66,30 +66,30 @@ static int jornada_bl_update_status(struct backlight_device *bd)
 	} else  /* turn on backlight */
 		PPSR |= PPC_LDD1;
 
-		/* send command to our mcu */
-		if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
-			dev_info(&bd->dev, "failed to set brightness\n");
-			ret = -ETIMEDOUT;
-			goto out;
-		}
+	/* send command to our mcu */
+	if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
+		dev_info(&bd->dev, "failed to set brightness\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
 
-		/*
-		 * at this point we expect that the mcu has accepted
-		 * our command and is waiting for our new value
-		 * please note that maximum brightness is 255,
-		 * but due to physical layout it is equal to 0, so we simply
-		 * invert the value (MAX VALUE - NEW VALUE).
-		 */
-		if (jornada_ssp_byte(BL_MAX_BRIGHT - bd->props.brightness)
-			!= TXDUMMY) {
-			dev_err(&bd->dev, "set brightness failed\n");
-			ret = -ETIMEDOUT;
-		}
+	/*
+	 * at this point we expect that the mcu has accepted
+	 * our command and is waiting for our new value
+	 * please note that maximum brightness is 255,
+	 * but due to physical layout it is equal to 0, so we simply
+	 * invert the value (MAX VALUE - NEW VALUE).
+	 */
+	if (jornada_ssp_byte(BL_MAX_BRIGHT - bd->props.brightness)
+		!= TXDUMMY) {
+		dev_err(&bd->dev, "set brightness failed\n");
+		ret = -ETIMEDOUT;
+	}
 
-		/*
-		 * If infact we get an TXDUMMY as output we are happy and dont
-		 * make any further comments about it
-		 */
+	/*
+	 * If infact we get an TXDUMMY as output we are happy and dont
+	 * make any further comments about it
+	 */
 out:
 	jornada_ssp_end();
 
-- 
2.29.2