[PATCH v2 6/7] usb: gadget: pch_udc: Initialize device pointer before use

[Andy Shevchenko]

During conversion to use GPIO descriptors the device pointer,
which is applied to devm_gpiod_get(), is not yet initialized.

Move initialization in the ->probe() in order to have it set before use.

Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
v2: no changes
 drivers/usb/gadget/udc/pch_udc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 58cea8d3d68f..07199fd1067c 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1370,6 +1370,7 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
  */
 static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
 {
+	struct device *d = &dev->pdev->dev;
 	int err;
 	int irq_num = 0;
 	struct gpio_desc *gpiod;
@@ -1378,7 +1379,7 @@ static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
 	dev->vbus_gpio.intr = 0;
 
 	/* Retrieve the GPIO line from the USB gadget device */
-	gpiod = devm_gpiod_get(dev->gadget.dev.parent, NULL, GPIOD_IN);
+	gpiod = devm_gpiod_get(d, NULL, GPIOD_IN);
 	if (IS_ERR(gpiod))
 		return PTR_ERR(gpiod);
 	gpiod_set_consumer_name(gpiod, "pch_vbus");
@@ -3081,6 +3082,7 @@ static int pch_udc_probe(struct pci_dev *pdev,
 	if (retval)
 		return retval;
 
+	dev->pdev = pdev;
 	pci_set_drvdata(pdev, dev);
 
 	/* Determine BAR based on PCI ID */
@@ -3122,7 +3124,6 @@ static int pch_udc_probe(struct pci_dev *pdev,
 
 	/* device struct setup */
 	spin_lock_init(&dev->lock);
-	dev->pdev = pdev;
 	dev->gadget.ops = &pch_udc_ops;
 
 	retval = init_dma_pools(dev);
-- 
2.30.2