Re: [PATCH v7 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding

[Liu Ying]

On Wed, 2021-03-31 at 08:40 -0500, Rob Herring wrote:
> On Wed, 31 Mar 2021 14:33:18 +0800, Liu Ying wrote:
> > This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
> > 
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> > ---
> > v6->v7:
> > * Add Rob's R-b tag.
> > 
> > v5->v6:
> > * Drop 'select' schema. (Rob)
> > 
> > v4->v5:
> > * Newly introduced in v5. (Rob)
> > 
> >  .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml   | 192 +++++++++++++++++++++
> >  1 file changed, 192 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.example.dt.yaml:0:0: /example-0/syscon@56221000/pxl2dpi: failed to match any schema with compatible: ['fsl,imx8qxp-pxl2dpi']
> Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.example.dt.yaml:0:0: /example-0/syscon@56221000/ldb: failed to match any schema with compatible: ['fsl,imx8qxp-ldb']
> Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.example.dt.yaml:0:0: /example-0/phy@56228300: failed to match any schema with compatible: ['fsl,imx8qxp-mipi-dphy']
> 

Sorry for the errors.
But, my patch passes 'make dt_binding_check' locally upon
v5.12-rc1-dontuse at least.
My yamllint and dt-schema are up to date.

Does your bot _additionally_ check all compatibles in example?
I guess I missed something?

Regards,
Liu Ying

> See https://patchwork.ozlabs.org/patch/1460356
> 
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
>