Re: [PATCH v4 3/4] locking/qspinlock: Add ARCH_USE_QUEUED_SPINLOCKS_XCHG32

[Guo Ren]

Hi Paul,

Thx for the explanation, here is my comment.

On Wed, Mar 31, 2021 at 1:33 PM Paul Campbell <taniwha@xxxxxxxxx> wrote:
>
> On Wednesday, 31 March 2021 5:18:56 PM NZDT Guo Ren wrote:
> > > > [1]
> > > > https://github.com/c-sky/csky-linux/commit/e837aad23148542771794d8a2fcc
> > > > 52afd0fcbf88> >
> > > > > It also seems that the current "amoswap" based implementation
> > > > > would be reliable independent of RsrvEventual/RsrvNonEventual.
> > > >
> > > > Yes, the hardware implementation of AMO could be different from LR/SC.
> > > > AMO could use ACE snoop holding to lock the bus in hw coherency
> > > > design, but LR/SC uses an exclusive monitor without locking the bus.
> > > >
> > > > RISC-V hasn't CAS instructions, and it uses LR/SC for cmpxchg. I don't
> > > > think LR/SC would be slower than CAS, and CAS is just good for code
> > > > size.
> > >
> > > What I meant here is that the current spinlock uses a simple amoswap,
> > > which presumably does not suffer from the lack of forward process you
> > > described.
> >
> > Does that mean we should prevent using LR/SC (if RsrvNonEventual)?
>
> Let me provide another data-point, I'm working on a high-end highly
> speculative implementation with many concurrent instructions in flight - from
> my point of view  both sorts of AMO (LR/SC and swap/add/etc) require me to
> grab a cache line in an exclusive modifiable state (so no difference there).
>
> More importantly both sorts of AMO instructions  (unlike most loads and
> stores) can't be speculated (not even LR because it changes hidden state, I
> found this out the hard way bringing up the kernel).
>
> This means that both LR AND SC individually can't be executed until all
> speculation is resolved (that means that they happen really late in the
> execute path and block the resolution of the speculation of subsequent
> instructions) - equally a single amoswap/add/etc instruction can't happen
> until late in the execute path - so both require the same cache line state,
> but one of these sorts of events is better than two of them.
>
> Which in short means that amoswap/add/etc is better for small things - small
> buzzy lock loops, while LR/SC is better for more complex things with actual
> processing between the LR and SC.
Seems your machine using the same way to implement LR/SC and AMO, but
some machines would differ them.

For AMO, I think it's would be like what you've described:
 - AMO would be separated into three parts: load & lock, ALU
operation, store & unlock
 - load & lock, eg: we could using ACE protocol -SNOOP channel to
holding the bus
 - Doing atomic AMO
 - store & unlock: Write the result back and releasing the ACE
protocol -SNOOP channel
I think the above is what you describe as how to "grab a cache line in
an exclusive modifiable state".

But for LR/SC, it's different. Because we have separated AMO into real
three parts of instruction:
 - LR
 - Operation instructions
 - SC
If we let LR holding ACE protocol -SNOOP channel and let SC release
channel, that would break the ISA design (we couldn't let an
instruction holding the snoop bus and made other harts hang up.)

So LR/SC would use address monitors for every hart, to detect the
target address has been written or not.
That means LR/SC won't be implemented fwd progress guarantees. If you
care about fwd progress guarantees, I think ISA should choose cmpxchg
(eg: cas) instead of LR/SC.


>
> ----
>
> Another issue here is to consider is what happens when you hit one of these
> tight spinlocks when the branch target cache is empty and they fail (ie loop
> back and try again) - the default branch prediction, and resulting
> speculation, is (very) likely to be looping back, while hopefully most locks
> are not contended when you hit them and that speculation would be wrong - a
> spinlock like this may not be so good:
>
>         li a0, 1
> loop:
>         amoswap a1, a0, (a2)
>         beqz    a1, loop
>         ..... subsequent code
>
> In my world with no BTC info the pipe fills with dozens of amoswaps, rather
> than  the 'subsequent code'. While (in my world) code like this:
>
>         li a0, 1
> loop:
>         amoswap a1, a0, (a2)
>         bnez    a1, 1f
>         .... subsequent code
>
> 1:      j loop
>
> would actually be better (in my world unconditional jump instructions are
> folded early and never see execution so they're sort of free, though they mess
> with the issue/decode rate). Smart compilers could move the "j loop" out of
> the way, while the double branch on failure is not a big deal since either the
> lock is still held (and you don't care if it's slow) or it's been released in
> which case the cache line has been stolen and the refetch of that cache line
> is going to dominate the next time around the loop
Thx for sharing the view of the spinlock speculative path. But I think
we should use smp_cond_load_acquire not looping.
That means we could use wfe/cpu_relax to let other harts utilized the
core's pipeline. So we needn't optimize the "subsequent code"
speculative path in the multi-threads processing core and just let the
hart relax.


>
> I need to stress here that this is how my architecture works, other's will of
> course be different though I expect that other heavily speculative
> architectures to have similar issues :-)
>
>         Paul Campbell
>         Moonbase Otago
>
>
>


-- 
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/