[PATCH v7 1/8] pwm: pca9685: Switch to atomic API

From: Clemens Gruber
Date: Tue Apr 06 2021 - 12:43:19 EST


The switch to the atomic API goes hand in hand with a few fixes to
previously experienced issues:
- The duty cycle is no longer lost after disable/enable (previously the
OFF registers were cleared in disable and the user was required to
call config to restore the duty cycle settings)
- If one sets a period resulting in the same prescale register value,
the sleep and write to the register is now skipped

Signed-off-by: Clemens Gruber <clemens.gruber@xxxxxxxxxxxx>
---
Changes since v6:
- Order of a comparison switched for improved readability

Changes since v5:
- Function documentation for set_duty
- Variable initializations
- Print warning if all LEDs channel
- Changed EOPNOTSUPP to EINVAL
- Improved error messages
- Register reset corrections moved to this patch

Changes since v4:
- Patches split up
- Use a single set_duty function
- Improve readability / new macros
- Added a patch to restrict prescale changes to the first user

Changes since v3:
- Refactoring: Extracted common functions
- Read prescale register value instead of caching it
- Return all zeros and disabled for "all LEDs" channel state
- Improved duty calculation / mapping to 0..4096

Changes since v2:
- Always set default prescale value in probe
- Simplified probe code
- Inlined functions with one callsite

Changes since v1:
- Fixed a logic error
- Impoved PM runtime handling and fixed !CONFIG_PM
- Write default prescale reg value if invalid in probe
- Reuse full_off/_on functions throughout driver
- Use cached prescale value whenever possible

drivers/pwm/pwm-pca9685.c | 261 ++++++++++++++------------------------
1 file changed, 92 insertions(+), 169 deletions(-)

diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 4a55dc18656c..5a2ce97e71fd 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -51,7 +51,6 @@
#define PCA9685_PRESCALE_MAX 0xFF /* => min. frequency of 24 Hz */

#define PCA9685_COUNTER_RANGE 4096
-#define PCA9685_DEFAULT_PERIOD 5000000 /* Default period_ns = 1/200 Hz */
#define PCA9685_OSC_CLOCK_MHZ 25 /* Internal oscillator with 25 MHz */

#define PCA9685_NUMREGS 0xFF
@@ -71,10 +70,14 @@
#define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N)))
#define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N)))

+#define REG_ON_H(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_H : LED_N_ON_H((C)))
+#define REG_ON_L(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_L : LED_N_ON_L((C)))
+#define REG_OFF_H(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_H : LED_N_OFF_H((C)))
+#define REG_OFF_L(C) ((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_L : LED_N_OFF_L((C)))
+
struct pca9685 {
struct pwm_chip chip;
struct regmap *regmap;
- int period_ns;
#if IS_ENABLED(CONFIG_GPIOLIB)
struct mutex lock;
struct gpio_chip gpio;
@@ -87,6 +90,51 @@ static inline struct pca9685 *to_pca(struct pwm_chip *chip)
return container_of(chip, struct pca9685, chip);
}

+/* Helper function to set the duty cycle ratio to duty/4096 (e.g. duty=2048 -> 50%) */
+static void pca9685_pwm_set_duty(struct pca9685 *pca, int channel, unsigned int duty)
+{
+ if (duty == 0) {
+ /* Set the full OFF bit, which has the highest precedence */
+ regmap_write(pca->regmap, REG_OFF_H(channel), LED_FULL);
+ } else if (duty >= PCA9685_COUNTER_RANGE) {
+ /* Set the full ON bit and clear the full OFF bit */
+ regmap_write(pca->regmap, REG_ON_H(channel), LED_FULL);
+ regmap_write(pca->regmap, REG_OFF_H(channel), 0);
+ } else {
+ /* Set OFF time (clears the full OFF bit) */
+ regmap_write(pca->regmap, REG_OFF_L(channel), duty & 0xff);
+ regmap_write(pca->regmap, REG_OFF_H(channel), (duty >> 8) & 0xf);
+ /* Clear the full ON bit */
+ regmap_write(pca->regmap, REG_ON_H(channel), 0);
+ }
+}
+
+static unsigned int pca9685_pwm_get_duty(struct pca9685 *pca, int channel)
+{
+ unsigned int off_h = 0, val = 0;
+
+ if (WARN_ON(channel >= PCA9685_MAXCHAN)) {
+ /* HW does not support reading state of "all LEDs" channel */
+ return 0;
+ }
+
+ regmap_read(pca->regmap, LED_N_OFF_H(channel), &off_h);
+ if (off_h & LED_FULL) {
+ /* Full OFF bit is set */
+ return 0;
+ }
+
+ regmap_read(pca->regmap, LED_N_ON_H(channel), &val);
+ if (val & LED_FULL) {
+ /* Full ON bit is set */
+ return PCA9685_COUNTER_RANGE;
+ }
+
+ val = 0;
+ regmap_read(pca->regmap, LED_N_OFF_L(channel), &val);
+ return ((off_h & 0xf) << 8) | (val & 0xff);
+}
+
#if IS_ENABLED(CONFIG_GPIOLIB)
static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx)
{
@@ -138,34 +186,23 @@ static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset)
static int pca9685_pwm_gpio_get(struct gpio_chip *gpio, unsigned int offset)
{
struct pca9685 *pca = gpiochip_get_data(gpio);
- struct pwm_device *pwm = &pca->chip.pwms[offset];
- unsigned int value;

- regmap_read(pca->regmap, LED_N_ON_H(pwm->hwpwm), &value);
-
- return value & LED_FULL;
+ return pca9685_pwm_get_duty(pca, offset) != 0;
}

static void pca9685_pwm_gpio_set(struct gpio_chip *gpio, unsigned int offset,
int value)
{
struct pca9685 *pca = gpiochip_get_data(gpio);
- struct pwm_device *pwm = &pca->chip.pwms[offset];
- unsigned int on = value ? LED_FULL : 0;
-
- /* Clear both OFF registers */
- regmap_write(pca->regmap, LED_N_OFF_L(pwm->hwpwm), 0);
- regmap_write(pca->regmap, LED_N_OFF_H(pwm->hwpwm), 0);

- /* Set the full ON bit */
- regmap_write(pca->regmap, LED_N_ON_H(pwm->hwpwm), on);
+ pca9685_pwm_set_duty(pca, offset, value ? PCA9685_COUNTER_RANGE : 0);
}

static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
{
struct pca9685 *pca = gpiochip_get_data(gpio);

- pca9685_pwm_gpio_set(gpio, offset, 0);
+ pca9685_pwm_set_duty(pca, offset, 0);
pm_runtime_put(pca->chip.dev);
pca9685_pwm_clear_inuse(pca, offset);
}
@@ -246,167 +283,56 @@ static void pca9685_set_sleep_mode(struct pca9685 *pca, bool enable)
}
}

-static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
+static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
{
struct pca9685 *pca = to_pca(chip);
- unsigned long long duty;
- unsigned int reg;
- int prescale;
-
- if (period_ns != pca->period_ns) {
- prescale = DIV_ROUND_CLOSEST(PCA9685_OSC_CLOCK_MHZ * period_ns,
- PCA9685_COUNTER_RANGE * 1000) - 1;
-
- if (prescale >= PCA9685_PRESCALE_MIN &&
- prescale <= PCA9685_PRESCALE_MAX) {
- /*
- * Putting the chip briefly into SLEEP mode
- * at this point won't interfere with the
- * pm_runtime framework, because the pm_runtime
- * state is guaranteed active here.
- */
- /* Put chip into sleep mode */
- pca9685_set_sleep_mode(pca, true);
-
- /* Change the chip-wide output frequency */
- regmap_write(pca->regmap, PCA9685_PRESCALE, prescale);
-
- /* Wake the chip up */
- pca9685_set_sleep_mode(pca, false);
-
- pca->period_ns = period_ns;
- } else {
- dev_err(chip->dev,
- "prescaler not set: period out of bounds!\n");
- return -EINVAL;
- }
- }
+ unsigned long long duty, prescale;
+ unsigned int val = 0;

- if (duty_ns < 1) {
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ return -EINVAL;

- regmap_write(pca->regmap, reg, LED_FULL);
-
- return 0;
+ prescale = DIV_ROUND_CLOSEST_ULL(PCA9685_OSC_CLOCK_MHZ * state->period,
+ PCA9685_COUNTER_RANGE * 1000) - 1;
+ if (prescale < PCA9685_PRESCALE_MIN || prescale > PCA9685_PRESCALE_MAX) {
+ dev_err(chip->dev, "pwm not changed: period out of bounds!\n");
+ return -EINVAL;
}

- if (duty_ns == period_ns) {
- /* Clear both OFF registers */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_L;
- else
- reg = LED_N_OFF_L(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, 0x0);
-
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, 0x0);
-
- /* Set the full ON bit */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_ON_H;
- else
- reg = LED_N_ON_H(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, LED_FULL);
+ duty = PCA9685_COUNTER_RANGE * state->duty_cycle;
+ duty = DIV_ROUND_CLOSEST_ULL(duty, state->period);

+ if (duty < 1 || !state->enabled) {
+ pca9685_pwm_set_duty(pca, pwm->hwpwm, 0);
+ return 0;
+ } else if (duty == PCA9685_COUNTER_RANGE) {
+ pca9685_pwm_set_duty(pca, pwm->hwpwm, duty);
return 0;
}

- duty = PCA9685_COUNTER_RANGE * (unsigned long long)duty_ns;
- duty = DIV_ROUND_UP_ULL(duty, period_ns);
-
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_L;
- else
- reg = LED_N_OFF_L(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, (int)duty & 0xff);
-
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf);
-
- /* Clear the full ON bit, otherwise the set OFF time has no effect */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_ON_H;
- else
- reg = LED_N_ON_H(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, 0);
-
- return 0;
-}
-
-static int pca9685_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct pca9685 *pca = to_pca(chip);
- unsigned int reg;
-
- /*
- * The PWM subsystem does not support a pre-delay.
- * So, set the ON-timeout to 0
- */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_ON_L;
- else
- reg = LED_N_ON_L(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, 0);
-
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_ON_H;
- else
- reg = LED_N_ON_H(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, 0);
+ regmap_read(pca->regmap, PCA9685_PRESCALE, &val);
+ if (prescale != val) {
+ /*
+ * Putting the chip briefly into SLEEP mode
+ * at this point won't interfere with the
+ * pm_runtime framework, because the pm_runtime
+ * state is guaranteed active here.
+ */
+ /* Put chip into sleep mode */
+ pca9685_set_sleep_mode(pca, true);

- /*
- * Clear the full-off bit.
- * It has precedence over the others and must be off.
- */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
+ /* Change the chip-wide output frequency */
+ regmap_write(pca->regmap, PCA9685_PRESCALE, (int)prescale);

- regmap_update_bits(pca->regmap, reg, LED_FULL, 0x0);
+ /* Wake the chip up */
+ pca9685_set_sleep_mode(pca, false);
+ }

+ pca9685_pwm_set_duty(pca, pwm->hwpwm, duty);
return 0;
}

-static void pca9685_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct pca9685 *pca = to_pca(chip);
- unsigned int reg;
-
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, LED_FULL);
-
- /* Clear the LED_OFF counter. */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_L;
- else
- reg = LED_N_OFF_L(pwm->hwpwm);
-
- regmap_write(pca->regmap, reg, 0x0);
-}
-
static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct pca9685 *pca = to_pca(chip);
@@ -422,15 +348,13 @@ static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct pca9685 *pca = to_pca(chip);

- pca9685_pwm_disable(chip, pwm);
+ pca9685_pwm_set_duty(pca, pwm->hwpwm, 0);
pm_runtime_put(chip->dev);
pca9685_pwm_clear_inuse(pca, pwm->hwpwm);
}

static const struct pwm_ops pca9685_pwm_ops = {
- .enable = pca9685_pwm_enable,
- .disable = pca9685_pwm_disable,
- .config = pca9685_pwm_config,
+ .apply = pca9685_pwm_apply,
.request = pca9685_pwm_request,
.free = pca9685_pwm_free,
.owner = THIS_MODULE,
@@ -461,7 +385,6 @@ static int pca9685_pwm_probe(struct i2c_client *client,
ret);
return ret;
}
- pca->period_ns = PCA9685_DEFAULT_PERIOD;

i2c_set_clientdata(client, pca);

@@ -484,9 +407,9 @@ static int pca9685_pwm_probe(struct i2c_client *client,
reg &= ~(MODE1_ALLCALL | MODE1_SUB1 | MODE1_SUB2 | MODE1_SUB3);
regmap_write(pca->regmap, PCA9685_MODE1, reg);

- /* Clear all "full off" bits */
- regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
- regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
+ /* Reset OFF registers to POR default */
+ regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, LED_FULL);
+ regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, LED_FULL);

pca->chip.ops = &pca9685_pwm_ops;
/* Add an extra channel for ALL_LED */
--
2.31.1