Re: [PATCH v2 06/10] irqchip: Add driver for WPCM450 interrupt controller

From: Marc Zyngier
Date: Wed Apr 07 2021 - 07:11:30 EST


On Tue, 06 Apr 2021 13:09:17 +0100,
Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> wrote:
>
> The WPCM450 AIC ("Advanced Interrupt Controller") is the interrupt
> controller found in the Nuvoton WPCM450 SoC and other Winbond/Nuvoton
> SoCs.
>
> The list of registers if based on the AMI vendor kernel and the
> Nuvoton W90N745 datasheet.
>
> Although the hardware supports other interrupt modes, the driver only
> supports high-level interrupts at the moment, because other modes could
> not be tested so far.
>
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
> ---
>
> v2:
> - Rename IRQS macro to AIC_NUM_IRQS
> - Fix IRQ range check
> - Use linux/printk.h header instead of linux/console.h
> - Add AIC_SCR_PRIORITY_MASK constant
> - Add missing register descriptions
> - Remove superfluous printk about IRQ flow type mismatch
> - Use BIT() macro
> - Rename _ack function to _eoi for accuracy, and use handle_fasteoi_irq
> ---
> arch/arm/mach-npcm/Kconfig | 1 +
> drivers/irqchip/Kconfig | 6 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-wpcm450-aic.c | 161 ++++++++++++++++++++++++++++++
> 4 files changed, 169 insertions(+)
> create mode 100644 drivers/irqchip/irq-wpcm450-aic.c
>
> diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
> index 658c8efb4ca14..a71cf1d189ae5 100644
> --- a/arch/arm/mach-npcm/Kconfig
> +++ b/arch/arm/mach-npcm/Kconfig
> @@ -10,6 +10,7 @@ config ARCH_WPCM450
> bool "Support for WPCM450 BMC (Hermon)"
> depends on ARCH_MULTI_V5
> select CPU_ARM926T
> + select WPCM450_AIC
> select NPCM7XX_TIMER
> help
> General support for WPCM450 BMC (Hermon).

I can't take this patch with this particular hunk, as I don't have
this file in my tree. I can either drop this line, or delay the
merging of this patch to a later point in time.

The driver otherwise looks ready.

Thanks,

M.

--
Without deviation from the norm, progress is not possible.