[PATCH v2 12/24] ARM: at91: pm: add self-refresh support for sama7g5
From: Claudiu Beznea
Date: Fri Apr 09 2021 - 07:16:40 EST
Add self-refresh support for SAMA7G5.
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
arch/arm/mach-at91/pm.h | 2 +
arch/arm/mach-at91/pm_data-offsets.c | 2 +
arch/arm/mach-at91/pm_suspend.S | 199 +++++++++++++++++++++++++++
3 files changed, 203 insertions(+)
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index bfb260be371e..666474088d55 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,6 +12,7 @@
#include <linux/mfd/syscon/atmel-mc.h>
#include <soc/at91/at91sam9_ddrsdr.h>
#include <soc/at91/at91sam9_sdramc.h>
+#include <soc/at91/sama7-ddr.h>
#define AT91_MEMCTRL_MC 0
#define AT91_MEMCTRL_SDRAMC 1
@@ -27,6 +28,7 @@
struct at91_pm_data {
void __iomem *pmc;
void __iomem *ramc[2];
+ void __iomem *ramc_phy;
unsigned long uhp_udp_mask;
unsigned int memctrl;
unsigned int mode;
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index 82089ff258c0..40bd4e8fe40a 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -8,6 +8,8 @@ int main(void)
DEFINE(PM_DATA_PMC, offsetof(struct at91_pm_data, pmc));
DEFINE(PM_DATA_RAMC0, offsetof(struct at91_pm_data, ramc[0]));
DEFINE(PM_DATA_RAMC1, offsetof(struct at91_pm_data, ramc[1]));
+ DEFINE(PM_DATA_RAMC_PHY, offsetof(struct at91_pm_data,
+ ramc_phy));
DEFINE(PM_DATA_MEMCTRL, offsetof(struct at91_pm_data, memctrl));
DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc));
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 7669b32d5257..84418120ba67 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -87,6 +87,200 @@ tmp3 .req r6
.arm
+#ifdef CONFIG_SOC_SAMA7
+/**
+ * Enable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7
+ */
+.macro at91_sramc_self_refresh_ena
+ ldr r2, .sramc_base
+ ldr r3, .sramc_phy_base
+ ldr r7, .pm_mode
+
+ dsb
+
+ /* Disable all AXI ports. */
+ ldr tmp1, [r2, #UDDRC_PCTRL_0]
+ bic tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_0]
+
+ ldr tmp1, [r2, #UDDRC_PCTRL_1]
+ bic tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_1]
+
+ ldr tmp1, [r2, #UDDRC_PCTRL_2]
+ bic tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_2]
+
+ ldr tmp1, [r2, #UDDRC_PCTRL_3]
+ bic tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_3]
+
+ ldr tmp1, [r2, #UDDRC_PCTRL_4]
+ bic tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_4]
+
+sr_ena_1:
+ /* Wait for all ports to disable. */
+ ldr tmp1, [r2, #UDDRC_PSTAT]
+ ldr tmp2, =UDDRC_PSTAT_ALL_PORTS
+ tst tmp1, tmp2
+ bne sr_ena_1
+
+ /* Switch to self-refresh. */
+ ldr tmp1, [r2, #UDDRC_PWRCTL]
+ orr tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+ str tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_ena_2:
+ /* Wait for self-refresh enter. */
+ ldr tmp1, [r2, #UDDRC_STAT]
+ bic tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK
+ cmp tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
+ bne sr_ena_2
+
+ /* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+ cmp r7, #AT91_PM_BACKUP
+ beq sr_ena_3
+ ldr tmp1, [r3, #DDR3PHY_PIR]
+ orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
+ str tmp1, [r3, #DDR3PHY_PIR]
+
+sr_ena_3:
+ /* Power down DDR PHY data receivers. */
+ ldr tmp1, [r3, #DDR3PHY_DXCCR]
+ orr tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+ str tmp1, [r3, #DDR3PHY_DXCCR]
+
+ /* Power down ADDR/CMD IO. */
+ ldr tmp1, [r3, #DDR3PHY_ACIOCR]
+ orr tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+ orr tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+ orr tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+ str tmp1, [r3, #DDR3PHY_ACIOCR]
+
+ /* Power down ODT. */
+ ldr tmp1, [r3, #DDR3PHY_DSGCR]
+ orr tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+ str tmp1, [r3, #DDR3PHY_DSGCR]
+.endm
+
+/**
+ * Disable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3
+ */
+.macro at91_sramc_self_refresh_dis
+ ldr r2, .sramc_base
+ ldr r3, .sramc_phy_base
+
+ /* Power up DDR PHY data receivers. */
+ ldr tmp1, [r3, #DDR3PHY_DXCCR]
+ bic tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+ str tmp1, [r3, #DDR3PHY_DXCCR]
+
+ /* Power up the output of CK and CS pins. */
+ ldr tmp1, [r3, #DDR3PHY_ACIOCR]
+ bic tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+ bic tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+ bic tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+ str tmp1, [r3, #DDR3PHY_ACIOCR]
+
+ /* Power up ODT. */
+ ldr tmp1, [r3, #DDR3PHY_DSGCR]
+ bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+ str tmp1, [r3, #DDR3PHY_DSGCR]
+
+ /* Take DDR PHY's DLL out of bypass mode. */
+ ldr tmp1, [r3, #DDR3PHY_PIR]
+ bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
+ str tmp1, [r3, #DDR3PHY_PIR]
+
+ /* Enable quasi-dynamic programming. */
+ mov tmp1, #0
+ str tmp1, [r2, #UDDRC_SWCTRL]
+
+ /* De-assert SDRAM initialization. */
+ ldr tmp1, [r2, #UDDRC_DFIMISC]
+ bic tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+ str tmp1, [r2, #UDDRC_DFIMISC]
+
+ /* Quasi-dynamic programming done. */
+ mov tmp1, #UDDRC_SWCTRL_SW_DONE
+ str tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_1:
+ ldr tmp1, [r2, #UDDRC_SWSTAT]
+ tst tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+ beq sr_dis_1
+
+ /* DLL soft-reset + DLL lock wait + ITM reset */
+ mov tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \
+ DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST)
+ str tmp1, [r3, #DDR3PHY_PIR]
+
+sr_dis_4:
+ /* Wait for it. */
+ ldr tmp1, [r3, #DDR3PHY_PGSR]
+ tst tmp1, #DDR3PHY_PGSR_IDONE
+ beq sr_dis_4
+
+ /* Enable quasi-dynamic programming. */
+ mov tmp1, #0
+ str tmp1, [r2, #UDDRC_SWCTRL]
+
+ /* Assert PHY init complete enable signal. */
+ ldr tmp1, [r2, #UDDRC_DFIMISC]
+ orr tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+ str tmp1, [r2, #UDDRC_DFIMISC]
+
+ /* Programming is done. Set sw_done. */
+ mov tmp1, #UDDRC_SWCTRL_SW_DONE
+ str tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_5:
+ /* Wait for it. */
+ ldr tmp1, [r2, #UDDRC_SWSTAT]
+ tst tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+ beq sr_dis_5
+
+ /* Trigger self-refresh exit. */
+ ldr tmp1, [r2, #UDDRC_PWRCTL]
+ bic tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+ str tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_dis_6:
+ /* Wait for self-refresh exit done. */
+ ldr tmp1, [r2, #UDDRC_STAT]
+ bic tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK
+ cmp tmp1, #UDDRC_STAT_OPMODE_NORMAL
+ bne sr_dis_6
+
+ /* Enable all AXI ports. */
+ ldr tmp1, [r2, #UDDRC_PCTRL_0]
+ orr tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_0]
+
+ ldr tmp1, [r2, #UDDRC_PCTRL_1]
+ orr tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_1]
+
+ ldr tmp1, [r2, #UDDRC_PCTRL_2]
+ orr tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_2]
+
+ ldr tmp1, [r2, #UDDRC_PCTRL_3]
+ orr tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_3]
+
+ ldr tmp1, [r2, #UDDRC_PCTRL_4]
+ orr tmp1, tmp1, #0x1
+ str tmp1, [r2, #UDDRC_PCTRL_4]
+
+ dsb
+.endm
+#else
/**
* Enable self-refresh
*
@@ -228,6 +422,7 @@ sdramc_exit_sf:
sr_dis_exit:
.endm
+#endif
.macro at91_pm_ulp0_mode
ldr pmc, .pmc_base
@@ -668,6 +863,8 @@ ENTRY(at91_pm_suspend_in_sram)
str tmp1, .sramc_base
ldr tmp1, [r0, #PM_DATA_RAMC1]
str tmp1, .sramc1_base
+ ldr tmp1, [r0, #PM_DATA_RAMC_PHY]
+ str tmp1, .sramc_phy_base
ldr tmp1, [r0, #PM_DATA_MEMCTRL]
str tmp1, .memtype
ldr tmp1, [r0, #PM_DATA_MODE]
@@ -721,6 +918,8 @@ ENDPROC(at91_pm_suspend_in_sram)
.word 0
.sramc1_base:
.word 0
+.sramc_phy_base:
+ .word 0
.shdwc:
.word 0
.sfrbu:
--
2.25.1