Re: [PATCH v4] platform/x86: add Gigabyte WMI temperature driver

[Guenter Roeck]

On 4/10/21 11:18 AM, Thomas Weißschuh wrote:
> Changes since v3:
> * Completely hide unusable sensors
> * Expose force_load parameter read-only via sysfs
> * Naming
> * Style cleanups
> 
> -- >8 --
> 
> Tested with
> * X570 I Aorus Pro Wifi (rev 1.0)
> * B550M DS3H
> * B550 Gaming X V2 (rev.1.x)
> * Z390 I AORUS PRO WIFI (rev. 1.0)
> 
> The mainboard contains an ITE IT8688E chip for management.
> This chips is also handled by drivers/hwmon/i87.c but as it is also used
> by the firmware itself it needs an ACPI driver.
> 
> Unfortunately not all sensor registers are handled by the firmware and even
> less are exposed via WMI.
> 
> Signed-off-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>

Good enough, though you may want to improve your description.

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

FWIW, on B450 AORUS M:

gigabyte-wmi DEADBEEF-2001-0000-00A0-C90629100000: Forcing load on unknown platform
gigabyte-wmi DEADBEEF-2001-0000-00A0-C90629100000: No temperature sensors usable

Wonder who came up with that GUID.

> ---

Change log and everything that is not supposed to show up in the git history
is supposed to go here.

Guenter

>  MAINTAINERS                         |   6 +
>  drivers/platform/x86/Kconfig        |  11 ++
>  drivers/platform/x86/Makefile       |   1 +
>  drivers/platform/x86/gigabyte-wmi.c | 195 ++++++++++++++++++++++++++++
>  4 files changed, 213 insertions(+)
>  create mode 100644 drivers/platform/x86/gigabyte-wmi.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d92f85ca831d..9c10cfc00fe8 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7543,6 +7543,12 @@ F:	Documentation/filesystems/gfs2*
>  F:	fs/gfs2/
>  F:	include/uapi/linux/gfs2_ondisk.h
>  
> +GIGABYTE WMI DRIVER
> +M:	Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> +L:	platform-driver-x86@xxxxxxxxxxxxxxx
> +S:	Maintained
> +F:	drivers/platform/x86/gigabyte-wmi.c
> +
>  GNSS SUBSYSTEM
>  M:	Johan Hovold <johan@xxxxxxxxxx>
>  S:	Maintained
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index ad4e630e73e2..96622a2106f7 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -123,6 +123,17 @@ config XIAOMI_WMI
>  	  To compile this driver as a module, choose M here: the module will
>  	  be called xiaomi-wmi.
>  
> +config GIGABYTE_WMI
> +	tristate "Gigabyte WMI temperature driver"
> +	depends on ACPI_WMI
> +	depends on HWMON
> +	help
> +	  Say Y here if you want to support WMI-based temperature reporting on
> +	  Gigabyte mainboards.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called gigabyte-wmi.
> +
>  config ACERHDF
>  	tristate "Acer Aspire One temperature and fan driver"
>  	depends on ACPI && THERMAL
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 60d554073749..1621ebfd04fd 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
>  obj-$(CONFIG_MXM_WMI)			+= mxm-wmi.o
>  obj-$(CONFIG_PEAQ_WMI)			+= peaq-wmi.o
>  obj-$(CONFIG_XIAOMI_WMI)		+= xiaomi-wmi.o
> +obj-$(CONFIG_GIGABYTE_WMI)		+= gigabyte-wmi.o
>  
>  # Acer
>  obj-$(CONFIG_ACERHDF)		+= acerhdf.o
> diff --git a/drivers/platform/x86/gigabyte-wmi.c b/drivers/platform/x86/gigabyte-wmi.c
> new file mode 100644
> index 000000000000..c17e51fcf000
> --- /dev/null
> +++ b/drivers/platform/x86/gigabyte-wmi.c
> @@ -0,0 +1,195 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + *  Copyright (C) 2021 Thomas Weißschuh <thomas@xxxxxxxxxxxxxx>
> + */
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/acpi.h>
> +#include <linux/dmi.h>
> +#include <linux/hwmon.h>
> +#include <linux/module.h>
> +#include <linux/wmi.h>
> +
> +#define GIGABYTE_WMI_GUID	"DEADBEEF-2001-0000-00A0-C90629100000"
> +#define NUM_TEMPERATURE_SENSORS	6
> +
> +static bool force_load;
> +module_param(force_load, bool, 0444);
> +MODULE_PARM_DESC(force_load, "Force loading on unknown platform");
> +
> +static u8 usable_sensors_mask;
> +
> +enum gigabyte_wmi_commandtype {
> +	GIGABYTE_WMI_BUILD_DATE_QUERY       =   0x1,
> +	GIGABYTE_WMI_MAINBOARD_TYPE_QUERY   =   0x2,
> +	GIGABYTE_WMI_FIRMWARE_VERSION_QUERY =   0x4,
> +	GIGABYTE_WMI_MAINBOARD_NAME_QUERY   =   0x5,
> +	GIGABYTE_WMI_TEMPERATURE_QUERY      = 0x125,
> +};
> +
> +struct gigabyte_wmi_args {
> +	u32 arg1;
> +};
> +
> +static int gigabyte_wmi_perform_query(struct wmi_device *wdev,
> +				      enum gigabyte_wmi_commandtype command,
> +				      struct gigabyte_wmi_args *args, struct acpi_buffer *out)
> +{
> +	const struct acpi_buffer in = {
> +		.length = sizeof(*args),
> +		.pointer = args,
> +	};
> +
> +	acpi_status ret = wmidev_evaluate_method(wdev, 0x0, command, &in, out);
> +
> +	if ACPI_FAILURE(ret)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +static int gigabyte_wmi_query_integer(struct wmi_device *wdev,
> +				      enum gigabyte_wmi_commandtype command,
> +				      struct gigabyte_wmi_args *args, u64 *res)
> +{
> +	union acpi_object *obj;
> +	struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL };
> +	int ret;
> +
> +	ret = gigabyte_wmi_perform_query(wdev, command, args, &result);
> +	if (ret)
> +		return ret;
> +	obj = result.pointer;
> +	if (obj && obj->type == ACPI_TYPE_INTEGER)
> +		*res = obj->integer.value;
> +	else
> +		ret = -EIO;
> +	kfree(result.pointer);
> +	return ret;
> +}
> +
> +static int gigabyte_wmi_temperature(struct wmi_device *wdev, u8 sensor, long *res)
> +{
> +	struct gigabyte_wmi_args args = {
> +		.arg1 = sensor,
> +	};
> +	u64 temp;
> +	acpi_status ret;
> +
> +	ret = gigabyte_wmi_query_integer(wdev, GIGABYTE_WMI_TEMPERATURE_QUERY, &args, &temp);
> +	if (ret == 0) {
> +		if (temp == 0)
> +			return -ENODEV;
> +		*res = (s8)temp * 1000; // value is a signed 8-bit integer
> +	}
> +	return ret;
> +}
> +
> +static int gigabyte_wmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> +				   u32 attr, int channel, long *val)
> +{
> +	struct wmi_device *wdev = dev_get_drvdata(dev);
> +
> +	return gigabyte_wmi_temperature(wdev, channel, val);
> +}
> +
> +static umode_t gigabyte_wmi_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
> +					     u32 attr, int channel)
> +{
> +	return usable_sensors_mask & BIT(channel) ? 0444  : 0;
> +}
> +
> +static const struct hwmon_channel_info *gigabyte_wmi_hwmon_info[] = {
> +	HWMON_CHANNEL_INFO(temp,
> +			   HWMON_T_INPUT,
> +			   HWMON_T_INPUT,
> +			   HWMON_T_INPUT,
> +			   HWMON_T_INPUT,
> +			   HWMON_T_INPUT,
> +			   HWMON_T_INPUT),
> +	NULL
> +};
> +
> +static const struct hwmon_ops gigabyte_wmi_hwmon_ops = {
> +	.read = gigabyte_wmi_hwmon_read,
> +	.is_visible = gigabyte_wmi_hwmon_is_visible,
> +};
> +
> +static const struct hwmon_chip_info gigabyte_wmi_hwmon_chip_info = {
> +	.ops = &gigabyte_wmi_hwmon_ops,
> +	.info = gigabyte_wmi_hwmon_info,
> +};
> +
> +static u8 gigabyte_wmi_detect_sensor_usability(struct wmi_device *wdev)
> +{
> +	int i;
> +	long temp;
> +	u8 r = 0;
> +
> +	for (i = 0; i < NUM_TEMPERATURE_SENSORS; i++) {
> +		if (!gigabyte_wmi_temperature(wdev, i, &temp))
> +			r |= BIT(i);
> +	}
> +	return r;
> +}
> +
> +static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = {
> +	{ .matches = {
> +		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
> +		DMI_EXACT_MATCH(DMI_BOARD_NAME, "B550 GAMING X V2"),
> +	}},
> +	{ .matches = {
> +		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
> +		DMI_EXACT_MATCH(DMI_BOARD_NAME, "B550M DS3H"),
> +	}},
> +	{ .matches = {
> +		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
> +		DMI_EXACT_MATCH(DMI_BOARD_NAME, "Z390 I AORUS PRO WIFI-CF"),
> +	}},
> +	{ .matches = {
> +		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
> +		DMI_EXACT_MATCH(DMI_BOARD_NAME, "X570 I AORUS PRO WIFI"),
> +	}},
> +	{ }
> +};
> +
> +static int gigabyte_wmi_probe(struct wmi_device *wdev, const void *context)
> +{
> +	struct device *hwmon_dev;
> +
> +	if (!dmi_check_system(gigabyte_wmi_known_working_platforms)) {
> +		if (!force_load)
> +			return -ENODEV;
> +		dev_warn(&wdev->dev, "Forcing load on unknown platform");
> +	}
> +
> +	usable_sensors_mask = gigabyte_wmi_detect_sensor_usability(wdev);
> +	if (!usable_sensors_mask) {
> +		dev_info(&wdev->dev, "No temperature sensors usable");
> +		return -ENODEV;
> +	}
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(&wdev->dev, "gigabyte_wmi", wdev,
> +							 &gigabyte_wmi_hwmon_chip_info, NULL);
> +
> +	return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static const struct wmi_device_id gigabyte_wmi_id_table[] = {
> +	{ GIGABYTE_WMI_GUID, NULL },
> +	{ }
> +};
> +
> +static struct wmi_driver gigabyte_wmi_driver = {
> +	.driver = {
> +		.name = "gigabyte-wmi",
> +	},
> +	.id_table = gigabyte_wmi_id_table,
> +	.probe = gigabyte_wmi_probe,
> +};
> +module_wmi_driver(gigabyte_wmi_driver);
> +
> +MODULE_DEVICE_TABLE(wmi, gigabyte_wmi_id_table);
> +MODULE_AUTHOR("Thomas Weißschuh <thomas@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Gigabyte WMI temperature Driver");
> +MODULE_LICENSE("GPL");
> 
> base-commit: 144c79ef33536b4ecb4951e07dbc1f2b7fa99d32
>