[PATCH net-next v7 2/9] net: dsa: microchip: ksz8795: move cpu_select_interface to extra function

From: Oleksij Rempel
Date: Mon Apr 26 2021 - 09:19:27 EST


From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>

This patch moves the cpu interface selection code to a individual
function specific for ksz8795. It will make it simpler to customize the
code path for different switches supported by this driver.

Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

---
v1 -> v5: - extracted this from previous bigger patch
---
drivers/net/dsa/microchip/ksz8795.c | 92 ++++++++++++++++-------------
1 file changed, 50 insertions(+), 42 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 91297df4371c..85fb727c13eb 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -909,10 +909,58 @@ static void ksz8_port_mirror_del(struct dsa_switch *ds, int port,
PORT_MIRROR_SNIFFER, false);
}

+static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port)
+{
+ struct ksz_port *p = &dev->ports[port];
+ u8 data8;
+
+ if (!p->interface && dev->compat_interface) {
+ dev_warn(dev->dev,
+ "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+ "Please update your device tree.\n",
+ port);
+ p->interface = dev->compat_interface;
+ }
+
+ /* Configure MII interface for proper network communication. */
+ ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
+ data8 &= ~PORT_INTERFACE_TYPE;
+ data8 &= ~PORT_GMII_1GPS_MODE;
+ switch (p->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ p->phydev.speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ data8 |= PORT_INTERFACE_RMII;
+ p->phydev.speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ data8 |= PORT_GMII_1GPS_MODE;
+ data8 |= PORT_INTERFACE_GMII;
+ p->phydev.speed = SPEED_1000;
+ break;
+ default:
+ data8 &= ~PORT_RGMII_ID_IN_ENABLE;
+ data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ data8 |= PORT_RGMII_ID_IN_ENABLE;
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ data8 |= PORT_RGMII_ID_OUT_ENABLE;
+ data8 |= PORT_GMII_1GPS_MODE;
+ data8 |= PORT_INTERFACE_RGMII;
+ p->phydev.speed = SPEED_1000;
+ break;
+ }
+ ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
+ p->phydev.duplex = 1;
+}
+
static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
{
struct ksz_port *p = &dev->ports[port];
- u8 data8, member;
+ u8 member;

/* enable broadcast storm limit */
ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
@@ -929,47 +977,7 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);

if (cpu_port) {
- if (!p->interface && dev->compat_interface) {
- dev_warn(dev->dev,
- "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
- "Please update your device tree.\n",
- port);
- p->interface = dev->compat_interface;
- }
-
- /* Configure MII interface for proper network communication. */
- ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
- data8 &= ~PORT_INTERFACE_TYPE;
- data8 &= ~PORT_GMII_1GPS_MODE;
- switch (p->interface) {
- case PHY_INTERFACE_MODE_MII:
- p->phydev.speed = SPEED_100;
- break;
- case PHY_INTERFACE_MODE_RMII:
- data8 |= PORT_INTERFACE_RMII;
- p->phydev.speed = SPEED_100;
- break;
- case PHY_INTERFACE_MODE_GMII:
- data8 |= PORT_GMII_1GPS_MODE;
- data8 |= PORT_INTERFACE_GMII;
- p->phydev.speed = SPEED_1000;
- break;
- default:
- data8 &= ~PORT_RGMII_ID_IN_ENABLE;
- data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
- if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
- data8 |= PORT_RGMII_ID_IN_ENABLE;
- if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
- data8 |= PORT_RGMII_ID_OUT_ENABLE;
- data8 |= PORT_GMII_1GPS_MODE;
- data8 |= PORT_INTERFACE_RGMII;
- p->phydev.speed = SPEED_1000;
- break;
- }
- ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
- p->phydev.duplex = 1;
+ ksz8795_cpu_interface_select(dev, port);

member = dev->port_mask;
} else {
--
2.29.2