[PATCH AUTOSEL 5.12 019/134] drm/amd/pm/swsmu: clean up user profile function

[Sasha Levin]

From: Arunpravin <Arunpravin.PaneerSelvam@xxxxxxx>

[ Upstream commit d8cce9306801cfbf709055677f7896905094ff95 ]

Remove unnecessary comments, enable restore mode using
'|=' operator, fixes the alignment to improve the code
readability.

v2: Move all restoration flag check to bitwise '&' operator

Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@xxxxxxx>
Reviewed-by: Evan Quan <evan.quan@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 34 ++++++++---------------
 1 file changed, 12 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index cd905e41080e..42c4dbe3e362 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -279,35 +279,25 @@ static void smu_set_user_clk_dependencies(struct smu_context *smu, enum smu_clk_
 	if (smu->adev->in_suspend)
 		return;
 
-	/*
-	 * mclk, fclk and socclk are interdependent
-	 * on each other
-	 */
 	if (clk == SMU_MCLK) {
-		/* reset clock dependency */
 		smu->user_dpm_profile.clk_dependency = 0;
-		/* set mclk dependent clocks(fclk and socclk) */
 		smu->user_dpm_profile.clk_dependency = BIT(SMU_FCLK) | BIT(SMU_SOCCLK);
 	} else if (clk == SMU_FCLK) {
-		/* give priority to mclk, if mclk dependent clocks are set */
+		/* MCLK takes precedence over FCLK */
 		if (smu->user_dpm_profile.clk_dependency == (BIT(SMU_FCLK) | BIT(SMU_SOCCLK)))
 			return;
 
-		/* reset clock dependency */
 		smu->user_dpm_profile.clk_dependency = 0;
-		/* set fclk dependent clocks(mclk and socclk) */
 		smu->user_dpm_profile.clk_dependency = BIT(SMU_MCLK) | BIT(SMU_SOCCLK);
 	} else if (clk == SMU_SOCCLK) {
-		/* give priority to mclk, if mclk dependent clocks are set */
+		/* MCLK takes precedence over SOCCLK */
 		if (smu->user_dpm_profile.clk_dependency == (BIT(SMU_FCLK) | BIT(SMU_SOCCLK)))
 			return;
 
-		/* reset clock dependency */
 		smu->user_dpm_profile.clk_dependency = 0;
-		/* set socclk dependent clocks(mclk and fclk) */
 		smu->user_dpm_profile.clk_dependency = BIT(SMU_MCLK) | BIT(SMU_FCLK);
 	} else
-		/* add clk dependencies here, if any */
+		/* Add clk dependencies here, if any */
 		return;
 }
 
@@ -331,7 +321,7 @@ static void smu_restore_dpm_user_profile(struct smu_context *smu)
 		return;
 
 	/* Enable restore flag */
-	smu->user_dpm_profile.flags = SMU_DPM_USER_PROFILE_RESTORE;
+	smu->user_dpm_profile.flags |= SMU_DPM_USER_PROFILE_RESTORE;
 
 	/* set the user dpm power limit */
 	if (smu->user_dpm_profile.power_limit) {
@@ -354,8 +344,8 @@ static void smu_restore_dpm_user_profile(struct smu_context *smu)
 				ret = smu_force_clk_levels(smu, clk_type,
 						smu->user_dpm_profile.clk_mask[clk_type]);
 				if (ret)
-					dev_err(smu->adev->dev, "Failed to set clock type = %d\n",
-							clk_type);
+					dev_err(smu->adev->dev,
+						"Failed to set clock type = %d\n", clk_type);
 			}
 		}
 	}
@@ -1777,7 +1767,7 @@ int smu_force_clk_levels(struct smu_context *smu,
 
 	if (smu->ppt_funcs && smu->ppt_funcs->force_clk_levels) {
 		ret = smu->ppt_funcs->force_clk_levels(smu, clk_type, mask);
-		if (!ret && smu->user_dpm_profile.flags != SMU_DPM_USER_PROFILE_RESTORE) {
+		if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) {
 			smu->user_dpm_profile.clk_mask[clk_type] = mask;
 			smu_set_user_clk_dependencies(smu, clk_type);
 		}
@@ -2034,7 +2024,7 @@ int smu_set_fan_speed_rpm(struct smu_context *smu, uint32_t speed)
 	if (smu->ppt_funcs->set_fan_speed_percent) {
 		percent = speed * 100 / smu->fan_max_rpm;
 		ret = smu->ppt_funcs->set_fan_speed_percent(smu, percent);
-		if (!ret && smu->user_dpm_profile.flags != SMU_DPM_USER_PROFILE_RESTORE)
+		if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE))
 			smu->user_dpm_profile.fan_speed_percent = percent;
 	}
 
@@ -2104,7 +2094,7 @@ int smu_set_power_limit(struct smu_context *smu, uint32_t limit)
 
 	if (smu->ppt_funcs->set_power_limit) {
 		ret = smu->ppt_funcs->set_power_limit(smu, limit);
-		if (!ret && smu->user_dpm_profile.flags != SMU_DPM_USER_PROFILE_RESTORE)
+		if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE))
 			smu->user_dpm_profile.power_limit = limit;
 	}
 
@@ -2285,7 +2275,7 @@ int smu_set_fan_control_mode(struct smu_context *smu, int value)
 
 	if (smu->ppt_funcs->set_fan_control_mode) {
 		ret = smu->ppt_funcs->set_fan_control_mode(smu, value);
-		if (!ret && smu->user_dpm_profile.flags != SMU_DPM_USER_PROFILE_RESTORE)
+		if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE))
 			smu->user_dpm_profile.fan_mode = value;
 	}
 
@@ -2293,7 +2283,7 @@ int smu_set_fan_control_mode(struct smu_context *smu, int value)
 
 	/* reset user dpm fan speed */
 	if (!ret && value != AMD_FAN_CTRL_MANUAL &&
-			smu->user_dpm_profile.flags != SMU_DPM_USER_PROFILE_RESTORE)
+			!(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE))
 		smu->user_dpm_profile.fan_speed_percent = 0;
 
 	return ret;
@@ -2335,7 +2325,7 @@ int smu_set_fan_speed_percent(struct smu_context *smu, uint32_t speed)
 		if (speed > 100)
 			speed = 100;
 		ret = smu->ppt_funcs->set_fan_speed_percent(smu, speed);
-		if (!ret && smu->user_dpm_profile.flags != SMU_DPM_USER_PROFILE_RESTORE)
+		if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE))
 			smu->user_dpm_profile.fan_speed_percent = speed;
 	}
 
-- 
2.30.2