Re: `quirk_usb_handoff_xhci` takes 60 ms with ASM1042
From: Paul Menzel
Date: Wed May 05 2021 - 08:17:06 EST
Dear Greg,
Am 05.05.21 um 10:33 schrieb Greg Kroah-Hartman:
On Wed, May 05, 2021 at 10:27:52AM +0200, Paul Menzel wrote:
Am 05.05.21 um 10:11 schrieb Greg Kroah-Hartman:
On Wed, May 05, 2021 at 09:57:44AM +0200, Paul Menzel wrote:
On an Asus F2A85-M PRO, BIOS 6601 11/25/2014, with an ASM1042 SuperSpeed USB
Host Controller [1b21:1042], and the xHCI drivers built as modules
CONFIG_USB_XHCI_PCI=m
CONFIG_USB_XHCI_HCD=m
`quirk_usb_handoff_xhci` takes 60 ms, which is 15 % of the time to reaching
`run_init_process()`. I addded some prints, showing the f
[ 0.308841] pci 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.369858] pci 0000:03:00.0: handshake done with timeout = 0
[ 0.369862] pci 0000:03:00.0: hc_init reached
[ 0.369865] pci 0000:03:00.0: second handshake done
[ 0.369869] pci 0000:03:00.0: third handshake done
[ 0.369909] pci 0000:03:00.0: quirk_usb_early_handoff+0x0/0x670 took 59661 usecs
[…]
[ 0.415223] Run /lib/systemd/systemd as init process
Is there a way to optimize this, or move it out “the hot path”?
That's the hardware taking so long, all that function does is make some
PCI calls to the device.
In your experience, do most devices take that long?
No idea, it all depends on the device. And is 60ms really that long to
initialize the USB controller?
For the goal of “instant” startup, I’d say yes.
I also guess, this is all the ASMedia ASM1042 firmware taking so long,
right?
That's a complex beast.
I miss the PS/2 controller, which seemed to be simpler for *input*
devices like keyboard and mouse. (No idea regarding power usage even.)
If the driver is built as a module, there should not be any "hot
path" here as the module is loaded async when the device is
discovered, right?
obj-$(CONFIG_USB_PCI) += pci-quirks.o
So all quirks are run independently of the USB “variant” (UHCI, OHCI, EHCI,
xHCI).
Indeed, this driver is built into the Linux kernel.
$ grep USB_PCI .config
CONFIG_USB_PCI=y
So, should `pci-quirks.c` be split up to have more fine grained control?
What control do you need here?
Good question, as I do not know the USB spec. I’d say, disabling certain
quirks, or just run them, when the actual driver is loaded.
And yeah, I see, but this code has to be run at early-startup to match
the USB spec requirements for handing off the USB control from the
BIOS/firmware/whatever, to the kernel.
That makes the second option above a moot point.
Try changing your BIOS settings to not have "legacy" USB support in it,
that could cause this transition to go faster, at the expense of not
being able to use a USB device before Linux boots.
The firmware of the Asus F2A85-M PRO allows to disable *legacy* USB
support for only the ASMedia ASM1042. And, thank you for the suggestion,
it helped. `quirk_usb_early_handoff()` does not show up in the logs now,
meaning it’s below 50 ms. And it is well below: less than one millisecond.
[ 0.308343] pci 0000:00:15.1: PCI->APIC IRQ transform: INT A ->
IRQ 16
[ 0.308359] pci 0000:03:00.0: PCI->APIC IRQ transform: INT A ->
IRQ 17
[ 0.308376] pci 0000:03:00.0: hc_init reached
[ 0.308380] pci 0000:03:00.0: second handshake done
[ 0.308384] pci 0000:03:00.0: third handshake done
[ 0.308395] PCI: CLS 64 bytes, default 64
[…]
[ 0.401722] Run /lib/systemd/systemd as init process
And is this really the slowest thing at startup for you that it is the
last thing that needs to be optimized?
At least with decreasing SMP boot init time of the table, it was the
biggest issue. 400 ms to init on an (old) x86 desktop board seems quite
good. If you see something else in the attached log messages, I am all ears.
(By the way, as the harddisk is not encrypted, I am booting without initrd.)
Kind regards,
Paul
[ 0.000000] Linux version 5.12.0+ (root@0c79dd7d1bd6) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #303 SMP Tue May 4 05:07:27 UTC 2021
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x146/0x270 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008da22fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008da23000-0x000000008de5dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008de5e000-0x000000008de6dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008de6e000-0x000000008df46fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008df47000-0x000000008e5f9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e5fa000-0x000000008e5fafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e5fb000-0x000000008e800fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008e801000-0x000000008ec3bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ec3c000-0x000000008eff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008eff4000-0x000000008effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/F2A85-M PRO, BIOS 6601 11/25/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Initial usec timer 19293422
[ 0.000000] tsc: Detected 3900.492 MHz processor
[ 0.000598] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000601] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000609] last_pfn = 0x8f000 max_arch_pfn = 0x100000
[ 0.000766] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001005] e820: update [mem 0x8f000000-0xffffffff] usable ==> reserved
[ 0.004531] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff]
[ 0.004627] check: Scanning 1 areas for low memory corruption
[ 0.004629] initial memory mapped: [mem 0x00000000-0x117fffff]
[ 0.007396] printk: log_buf_len: 2097152 bytes
[ 0.007397] printk: early log buf free: 259384(98%)
[ 0.007401] 1408MB HIGHMEM available.
[ 0.007402] 879MB LOWMEM available.
[ 0.007403] mapped low ram: 0 - 36ffe000
[ 0.007404] low ram: 0 - 36ffe000
[ 0.007418] Zone ranges:
[ 0.007419] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007422] Normal [mem 0x0000000001000000-0x0000000036ffdfff]
[ 0.007423] HighMem [mem 0x0000000036ffe000-0x000000008effffff]
[ 0.007425] Movable zone start for each node
[ 0.007426] Early memory node ranges
[ 0.007426] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.007428] node 0: [mem 0x0000000000100000-0x000000008da22fff]
[ 0.007429] node 0: [mem 0x000000008e5fa000-0x000000008e5fafff]
[ 0.007430] node 0: [mem 0x000000008e801000-0x000000008ec3bfff]
[ 0.007432] node 0: [mem 0x000000008eff4000-0x000000008effffff]
[ 0.007433] Initmem setup node 0 [mem 0x0000000000001000-0x000000008effffff]
[ 0.007436] On node 0 totalpages: 581128
[ 0.007437] DMA zone: 32 pages used for memmap
[ 0.007438] DMA zone: 0 pages reserved
[ 0.007439] DMA zone: 3997 pages, LIFO batch:0
[ 0.007615] DMA zone: 12387 pages in unavailable ranges
[ 0.007616] Normal zone: 1728 pages used for memmap
[ 0.007617] Normal zone: 221182 pages, LIFO batch:63
[ 0.009943] Normal zone: 4098 pages in unavailable ranges
[ 0.009946] HighMem zone: 355949 pages, LIFO batch:63
[ 0.013772] HighMem zone: 8597 pages in unavailable ranges
[ 0.013776] Using APIC driver default
[ 0.013969] Intel MultiProcessor Specification v1.4
[ 0.013970] Virtual Wire compatibility mode.
[ 0.013973] MPTABLE: OEM ID: A M I
[ 0.013974] MPTABLE: Product ID: ALASKA
[ 0.013974] MPTABLE: APIC at: 0xFEE00000
[ 0.013976] Processor #16 (Bootup-CPU)
[ 0.013977] Processor #17
[ 0.013984] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.013991] Processors: 2
[ 0.013992] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013993] smpboot: smpboot: XXX end of prefill_possible_map
[ 0.013994] After prefill_possible_map
[ 0.013994] After init_cpu_to_node
[ 0.013995] After init_gi_nodes
[ 0.013997] After io_apic_init_mappings
[ 0.013998] After x86_init.hyper.guest_late_init
[ 0.014008] [mem 0x8f000000-0xfebfffff] available for PCI devices
[ 0.014009] After e820
[ 0.014011] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.014015] After unwind_init
[ 0.014015] After setup_arch
[ 0.014022] After setup_command_line
[ 0.014023] After setup_nr_cpu_ids
[ 0.014024] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.014104] percpu: Embedded 34 pages/cpu s109388 r0 d29876 u139264
[ 0.014108] pcpu-alloc: s109388 r0 d29876 u139264 alloc=34*4096
[ 0.014111] pcpu-alloc: [0] 0 [0] 1
[ 0.014121] After setup_per_cpu_areas
[ 0.014122] After smp_perpare_boot_cpu
[ 0.014122] After boot_cpu_hotplug_init
[ 0.014124] Built 1 zonelists, mobility grouping on. Total pages: 579368
[ 0.014126] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.12.0+ root=PARTUUID=a8d3fa41-01 rw noisapnp cryptomgr.notests quiet init=/lib/systemd/systemd memory_corruption_check=1 memory_corruption_check_size=512k memory_corruption_check_period=5 iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=serial8250_init,asus_wmi_init,wmi_bmof_driver_init udev.children_max=6 udev.log_priority=info maxcpus=4 log_buf_len=2M random.trust_cpu=on acpi=off
[ 0.014254] blacklisting initcall serial8250_init
[ 0.014256] blacklisting initcall asus_wmi_init
[ 0.014258] blacklisting initcall wmi_bmof_driver_init
[ 0.014419] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.014464] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.014474] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.014477] Initializing HighMem for node 0 (00036ffe:0008f000)
[ 0.014479] add_highpages_with_active_regions: start_pfn = 225278, end_pfn = 585728
[ 0.014480] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014482] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014484] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014485] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014487] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014488] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014490] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014491] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014492] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014494] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014495] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014497] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014498] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014500] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014501] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014503] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014504] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014506] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014507] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014509] add_highpages_with_active_regions: for_each_free_mem_range: i = 94489280513, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014510] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247809, nid = 0, pfn = 225278, e_pfn = 225278, before for loop
[ 0.014512] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247810, nid = 0, pfn = 225278, e_pfn = 580131, before for loop
[ 0.065603] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247811, nid = 0, pfn = 583162, e_pfn = 583163, before for loop
[ 0.065606] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247812, nid = 0, pfn = 583681, e_pfn = 584764, before for loop
[ 0.065766] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247813, nid = 0, pfn = 585716, e_pfn = 585728, before for loop
[ 0.065769] Initializing Movable for node 0 (00000000:00000000)
[ 0.065771] add_highpages_with_active_regions: start_pfn = 0, end_pfn = 0
[ 0.065772] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065774] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065775] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065777] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065778] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065780] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065781] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065783] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065784] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065785] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065787] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065788] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065790] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065791] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065792] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065794] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065795] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065797] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065798] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065800] add_highpages_with_active_regions: for_each_free_mem_range: i = 94489280513, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065801] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247809, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065803] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247810, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065804] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247811, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065805] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247812, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.065807] add_highpages_with_active_regions: for_each_free_mem_range: i = 98784247813, nid = 0, pfn = 0, e_pfn = 0, before for loop
[ 0.067862] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.067869] Memory: 2283036K/2324512K available (8266K kernel code, 1423K rwdata, 1780K rodata, 632K init, 488K bss, 41476K reserved, 0K cma-reserved, 1423796K highmem)
[ 0.067904] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.067910] After mm_init
[ 0.067912] ftrace: allocating 25645 entries in 51 pages
[ 0.075170] ftrace: allocated 51 pages with 4 groups
[ 0.075228] After sched_init
[ 0.075247] rcu: Hierarchical RCU implementation.
[ 0.075248] rcu: RCU event tracing is enabled.
[ 0.075248] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.075250] Rude variant of Tasks RCU enabled.
[ 0.075251] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.075252] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.075256] After rcu_init
[ 0.075653] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[ 0.075955] random: crng_init_try_arch_early failed with i = 4, X86_FEATURE_RDRAND = no
[ 0.075958] random: crng_init_try_arch_early failed with i = 5, X86_FEATURE_RDRAND = no
[ 0.075959] random: crng_init_try_arch_early failed with i = 6, X86_FEATURE_RDRAND = no
[ 0.075960] random: crng_init_try_arch_early failed with i = 7, X86_FEATURE_RDRAND = no
[ 0.075961] random: crng_init_try_arch_early failed with i = 8, X86_FEATURE_RDRAND = no
[ 0.075962] random: crng_init_try_arch_early failed with i = 9, X86_FEATURE_RDRAND = no
[ 0.075962] random: crng_init_try_arch_early failed with i = 10, X86_FEATURE_RDRAND = no
[ 0.075963] random: crng_init_try_arch_early failed with i = 11, X86_FEATURE_RDRAND = no
[ 0.075964] random: crng_init_try_arch_early failed with i = 12, X86_FEATURE_RDRAND = no
[ 0.075965] random: crng_init_try_arch_early failed with i = 13, X86_FEATURE_RDRAND = no
[ 0.075966] random: crng_init_try_arch_early failed with i = 14, X86_FEATURE_RDRAND = no
[ 0.075967] random: crng_init_try_arch_early failed with i = 15, X86_FEATURE_RDRAND = no
[ 0.075968] After add_latent_entropy
[ 0.075975] After add_device_randomness
[ 0.075977] After boot_init_stack_canary
[ 0.075992] spurious 8259A interrupt: IRQ7.
[ 0.078800] Console: colour VGA+ 80x25
[ 0.078819] printk: console [tty0] enabled
[ 0.078837] APIC: Switch to symmetric I/O mode setup
[ 0.078838] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.079242] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083836] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x707257b541d, max_idle_ns: 881591184336 ns
[ 0.083842] Calibrating delay loop (skipped), value calculated using timer frequency.. 7800.98 BogoMIPS (lpj=3900492)
[ 0.083846] pid_max: default: 32768 minimum: 301
[ 0.083857] LSM: Security Framework initializing
[ 0.083867] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.083870] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.084036] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.084038] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.084041] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.084044] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.084045] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.084047] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.084203] Freeing SMP alternatives memory: 32K
[ 0.084205] After check_bugs
[ 0.084206] After acpi_subsystem_init
[ 0.084207] After arch_post_acpi_subsys_init
[ 0.084208] After rcu_scheduler_starting
[ 0.084231] After find_task_by_pid_ns
[ 0.084231] After numa_default_policy
[ 0.084242] After rcu_read_lock
[ 0.084243] After rcu_read_unlock
[ 0.084245] After kthreadd_done
[ 0.084246] smpboot: Start of native_smp_prepare_cpus
[ 0.084247] smpboot: smpboot: zalloc 0
[ 0.084248] smpboot: smpboot: zalloc 1
[ 0.084249] smpboot: smpboot: After set_sched_topology()
[ 0.084250] smpboot: smpboot: After smp_sanity_check()
[ 0.084251] smpboot: smpboot: Before x86_init.timers.setup_percpu_clockev()
[ 0.142841] random: random: 1
[ 0.142842] random: random: 2
[ 0.142842] random: random: 3
[ 0.142843] random: random: 4
[ 0.206841] random: random: 1
[ 0.206841] random: random: 2
[ 0.206842] random: random: 3
[ 0.206842] random: random: 4
[ 0.270841] random: random: 1
[ 0.270841] random: random: 2
[ 0.270842] random: random: 3
[ 0.270842] random: random: 4
[ 0.288283] smpboot: smpboot: After x86_init.timers.setup_percpu_clockev()
[ 0.288284] smpboot: smp_get_logical_apicid()
[ 0.288285] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[ 0.288371] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.288375] ... version: 0
[ 0.288376] ... bit width: 48
[ 0.288376] ... generic registers: 6
[ 0.288377] ... value mask: 0000ffffffffffff
[ 0.288378] ... max period: 00007fffffffffff
[ 0.288379] ... fixed-purpose events: 0
[ 0.288380] ... event mask: 000000000000003f
[ 0.288422] rcu: Hierarchical SRCU implementation.
[ 0.288578] smp: Bringing up secondary CPUs ...
[ 0.288638] x86: Booting SMP configuration:
[ 0.288639] .... node #0, CPUs: #1
[ 0.288859] After schedule_preempt_disabled
[ 0.288889] smp: Brought up 1 node, 2 CPUs
[ 0.288889] smpboot: Max logical packages: 1
[ 0.288889] smpboot: Total of 2 processors activated (15601.96 BogoMIPS)
[ 0.289136] devtmpfs: initialized
[ 0.289966] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.289971] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.290080] NET: Registered protocol family 16
[ 0.290080] audit: initializing netlink subsys (disabled)
[ 0.290080] audit: type=2000 audit(1620213564.211:1): state=initialized audit_enabled=0 res=1
[ 0.290080] thermal_sys: Registered thermal governor 'step_wise'
[ 0.290080] thermal_sys: Registered thermal governor 'user_space'
[ 0.290080] cpuidle: using governor menu
[ 0.290080] PCI: after first if
[ 0.290080] PCI: after second if
[ 0.290080] pci_check_type1
[ 0.290080] PCI: After pci_direct_probe
[ 0.290080] PCI: After pci_probe
[ 0.290080] PCI: After 2nd if
[ 0.298500] PCI: After pci_pcbios_init
[ 0.298535] PCI: Using configuration type 1 for base access
[ 0.298536] PCI: Using configuration type 1 for extended access
[ 0.298542] PCI: After dmi_check
[ 0.298577] PCI: After isa_align
[ 0.299873] Kprobes globally optimized
[ 0.299880] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.299880] cryptomgr_test (28) used greatest stack depth: 7724 bytes left
[ 0.299880] SCSI subsystem initialized
[ 0.299880] libata version 3.00 loaded.
[ 0.299880] vgaarb: loaded
[ 0.299880] pps_core: LinuxPPS API ver. 1 registered
[ 0.299880] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.299880] PTP clock support registered
[ 0.299987] PCI: Probing PCI hardware
[ 0.299987] PCI: root bus 00: using default resources
[ 0.299987] PCI: Probing PCI hardware (bus 00)
[ 0.299987] PCI host bridge to bus 0000:00
[ 0.299987] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.299987] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.299987] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.299987] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.299987] pci 0000:00:01.0: [1002:9996] type 00 class 0x030000
[ 0.299987] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.299987] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.299987] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.299991] pci 0000:00:01.0: enabling Extended Tags
[ 0.300018] pci 0000:00:01.0: supports D1 D2
[ 0.300041] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.300042] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.300058] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.300068] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.300098] pci 0000:00:01.1: enabling Extended Tags
[ 0.300124] pci 0000:00:01.1: supports D1 D2
[ 0.300192] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.300215] pci 0000:00:10.0: reg 0x10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[ 0.300323] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.300324] pci 0000:00:10.0: pme_poll = true
[ 0.300325] pci 0000:00:10.0: after device_set_wakeup_capable()
[ 0.300329] pci 0000:00:10.0: after pci_pme_active()
[ 0.300388] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 0.300411] pci 0000:00:10.1: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 0.300518] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.300520] pci 0000:00:10.1: pme_poll = true
[ 0.300521] pci 0000:00:10.1: after device_set_wakeup_capable()
[ 0.300524] pci 0000:00:10.1: after pci_pme_active()
[ 0.300580] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.300596] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.300605] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.300613] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.300622] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.300630] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.300639] pci 0000:00:11.0: reg 0x24: [mem 0xfeb50000-0xfeb507ff]
[ 0.300899] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.300914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4f000-0xfeb4ffff]
[ 0.301000] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.301016] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4e000-0xfeb4e0ff]
[ 0.301089] pci 0000:00:12.2: supports D1 D2
[ 0.301090] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.301091] pci 0000:00:12.2: pme_poll = true
[ 0.301092] pci 0000:00:12.2: after device_set_wakeup_capable()
[ 0.301095] pci 0000:00:12.2: after pci_pme_active()
[ 0.301132] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.301147] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
[ 0.301231] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.301247] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
[ 0.301321] pci 0000:00:13.2: supports D1 D2
[ 0.301322] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.301323] pci 0000:00:13.2: pme_poll = true
[ 0.301324] pci 0000:00:13.2: after device_set_wakeup_capable()
[ 0.301327] pci 0000:00:13.2: after pci_pme_active()
[ 0.301366] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.301458] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.301477] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.301538] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.301540] pci 0000:00:14.2: pme_poll = true
[ 0.301541] pci 0000:00:14.2: after device_set_wakeup_capable()
[ 0.301544] pci 0000:00:14.2: after pci_pme_active()
[ 0.301573] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.301664] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.301739] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.301778] pci 0000:00:15.0: enabling Extended Tags
[ 0.301822] pci 0000:00:15.0: supports D1 D2
[ 0.301875] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.301914] pci 0000:00:15.1: enabling Extended Tags
[ 0.301956] pci 0000:00:15.1: supports D1 D2
[ 0.302003] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.302042] pci 0000:00:15.2: enabling Extended Tags
[ 0.302085] pci 0000:00:15.2: supports D1 D2
[ 0.302129] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.302173] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.302213] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.302253] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.302302] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.302343] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.302397] pci_bus 0000:01: extended config space not accessible
[ 0.302451] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.302459] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.302461] pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.302499] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.302569] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.302599] pci 0000:03:00.0: reg 0x10: [mem 0xfea00000-0xfea07fff 64bit]
[ 0.302735] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.302737] pci 0000:03:00.0: pme_poll = true
[ 0.302738] pci 0000:03:00.0: after device_set_wakeup_capable()
[ 0.302742] pci 0000:03:00.0: after pci_pme_active()
[ 0.302816] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.302822] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.302890] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.302912] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.302941] pci 0000:04:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.302959] pci 0000:04:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.303062] pci 0000:04:00.0: supports D1 D2
[ 0.303063] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.303064] pci 0000:04:00.0: pme_poll = true
[ 0.303065] pci 0000:04:00.0: after device_set_wakeup_capable()
[ 0.303069] pci 0000:04:00.0: after pci_pme_active()
[ 0.303146] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.303151] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.303157] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.303183] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
[ 0.303217] pci 0000:00:14.3: default IRQ router [1022:780e]
[ 0.303223] PCI: pci_cache_line_size set to 64 bytes
[ 0.303274] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.303276] e820: reserve RAM buffer [mem 0x8da23000-0x8fffffff]
[ 0.303278] e820: reserve RAM buffer [mem 0x8e5fb000-0x8fffffff]
[ 0.303279] e820: reserve RAM buffer [mem 0x8ec3c000-0x8fffffff]
[ 0.303280] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[ 0.303841] clocksource: Switched to clocksource tsc-early
[ 0.306735] VFS: Disk quotas dquot_6.6.0
[ 0.306751] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.307817] NET: Registered protocol family 2
[ 0.307861] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.308081] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.308086] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.308098] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.308116] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.308137] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.308143] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.308178] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.308191] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.308201] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.308205] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.308213] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.308216] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.308222] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.308229] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.308231] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.308234] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.308236] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.308238] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.308240] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.308242] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.308253] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.308273] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.308279] pci 0000:00:10.0: Skip AMD USB device
[ 0.308283] pci 0000:00:10.1: Skip AMD USB device
[ 0.308290] pci 0000:00:12.0: Skip AMD USB device
[ 0.308293] pci 0000:00:12.2: Skip AMD USB device
[ 0.308295] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.308299] pci 0000:00:13.0: Skip AMD USB device
[ 0.308302] pci 0000:00:13.2: Skip AMD USB device
[ 0.308304] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.308343] pci 0000:00:15.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.308359] pci 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.308376] pci 0000:03:00.0: hc_init reached
[ 0.308380] pci 0000:03:00.0: second handshake done
[ 0.308384] pci 0000:03:00.0: third handshake done
[ 0.308395] PCI: CLS 64 bytes, default 64
[ 0.308557] amd_uncore: 4 amd_nb counters detected
[ 0.310971] LVT offset 0 assigned for vector 0x400
[ 0.310985] perf: AMD IBS detected (0x000000ff)
[ 0.311008] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.311121] check: Scanning for low memory corruption every 5 seconds
[ 0.311333] workingset: timestamp_bits=30 max_order=20 bucket_order=0
[ 0.312427] bounce: pool size: 64 pages
[ 0.312438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.312440] io scheduler mq-deadline registered
[ 0.312442] io scheduler kyber registered
[ 0.312528] pcieport 0000:00:15.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.312588] pcieport 0000:00:15.0: PME: Signaling with IRQ 24
[ 0.312685] pcieport 0000:00:15.1: PME: Signaling with IRQ 25
[ 0.312741] pcieport 0000:00:15.2: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.312786] pcieport 0000:00:15.2: PME: Signaling with IRQ 26
[ 0.312898] initcall serial8250_init blacklisted
[ 0.312916] Non-volatile memory driver v1.3
[ 0.312918] Linux agpgart interface v0.103
[ 0.314193] loop: module loaded
[ 0.314245] ahci 0000:00:11.0: version 3.0
[ 0.314255] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 0.314286] ata_host_alloc: ENTER
[ 0.314325] ata_port_alloc: ENTER
[ 0.314365] ata_port_alloc: ENTER
[ 0.314403] ata_port_alloc: ENTER
[ 0.314442] ata_port_alloc: ENTER
[ 0.314481] ata_port_alloc: ENTER
[ 0.314519] ata_port_alloc: ENTER
[ 0.314557] ata_port_alloc: ENTER
[ 0.314598] ata_port_alloc: ENTER
[ 0.314735] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.314738] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio sxs
[ 0.314772] __ata_port_freeze: ata4294967295 port frozen
[ 0.314837] __ata_port_freeze: ata4294967295 port frozen
[ 0.314899] __ata_port_freeze: ata4294967295 port frozen
[ 0.314961] __ata_port_freeze: ata4294967295 port frozen
[ 0.315022] __ata_port_freeze: ata4294967295 port frozen
[ 0.315084] __ata_port_freeze: ata4294967295 port frozen
[ 0.315146] __ata_port_freeze: ata4294967295 port frozen
[ 0.315208] __ata_port_freeze: ata4294967295 port frozen
[ 0.315634] scsi host0: ahci
[ 0.315736] scsi host1: ahci
[ 0.315816] scsi host2: ahci
[ 0.315896] scsi host3: ahci
[ 0.315972] scsi host4: ahci
[ 0.316044] scsi host5: ahci
[ 0.316119] scsi host6: ahci
[ 0.316192] scsi host7: ahci
[ 0.316225] ata1: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50100 irq 27
[ 0.316228] ata2: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50180 irq 27
[ 0.316230] ata3: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50200 irq 27
[ 0.316232] ata4: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50280 irq 27
[ 0.316234] ata5: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50300 irq 27
[ 0.316236] ata6: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50380 irq 27
[ 0.316238] ata7: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50400 irq 27
[ 0.316240] ata8: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50480 irq 27
[ 0.316251] ata_std_sched_eh: port EH scheduled
[ 0.316305] ata_scsi_error: ENTER
[ 0.316345] ata_eh_link_autopsy: ENTER
[ 0.316384] ata_eh_recover: ENTER
[ 0.316425] __ata_port_freeze: ata1 port frozen
[ 0.316464] ahci_do_hardreset: ENTER
[ 0.316504] sata_link_hardreset: ENTER
[ 0.316545] ata_dev_classify: unknown device
[ 0.316584] ahci_do_hardreset: EXIT, rc=0, class=0
[ 0.316627] ata_eh_thaw_port: ata1 port thawed
[ 0.316665] ata_std_postreset: ENTER
[ 0.316707] ata1: SATA link down (SStatus 0 SControl 0)
[ 0.316709] ata_std_postreset: EXIT
[ 0.316750] ata_eh_revalidate_and_attach: ENTER
[ 0.316790] ata_eh_recover: EXIT, rc=0
[ 0.316832] ata_scsi_error: EXIT
[ 0.316875] ata_std_sched_eh: port EH scheduled
[ 0.316914] ata_scsi_error: ENTER
[ 0.316953] ata_eh_link_autopsy: ENTER
[ 0.316991] ata_eh_recover: ENTER
[ 0.317029] __ata_port_freeze: ata2 port frozen
[ 0.317068] ahci_do_hardreset: ENTER
[ 0.317085] i8042: XXX
[ 0.317105] i8042: XXX
[ 0.317107] i8042: XXX
[ 0.317108] sata_link_hardreset: ENTER
[ 0.317108] i8042: XXX
[ 0.317149] ata_dev_classify: unknown device
[ 0.317187] ahci_do_hardreset: EXIT, rc=0, class=0
[ 0.317229] ata_eh_thaw_port: ata2 port thawed
[ 0.317273] ata_std_postreset: ENTER
[ 0.317316] ata2: SATA link down (SStatus 0 SControl 0)
[ 0.317318] ata_std_postreset: EXIT
[ 0.317362] ata_eh_revalidate_and_attach: ENTER
[ 0.317400] ata_eh_recover: EXIT, rc=0
[ 0.317445] ata_scsi_error: EXIT
[ 0.317489] ata_std_sched_eh: port EH scheduled
[ 0.317530] ata_scsi_error: ENTER
[ 0.317568] ata_eh_link_autopsy: ENTER
[ 0.317612] ata_eh_recover: ENTER
[ 0.317657] __ata_port_freeze: ata3 port frozen
[ 0.317696] ahci_do_hardreset: ENTER
[ 0.317740] sata_link_hardreset: ENTER
[ 0.317785] ata_dev_classify: unknown device
[ 0.317823] ahci_do_hardreset: EXIT, rc=0, class=0
[ 0.317872] ata_eh_thaw_port: ata3 port thawed
[ 0.317912] ata_std_postreset: ENTER
[ 0.317953] ata3: SATA link down (SStatus 0 SControl 0)
[ 0.317955] ata_std_postreset: EXIT
[ 0.318000] ata_eh_revalidate_and_attach: ENTER
[ 0.318039] ata_eh_recover: EXIT, rc=0
[ 0.318082] ata_scsi_error: EXIT
[ 0.318124] ata_std_sched_eh: port EH scheduled
[ 0.318169] ata_scsi_error: ENTER
[ 0.318209] ata_eh_link_autopsy: ENTER
[ 0.318251] ata_eh_recover: ENTER
[ 0.318292] __ata_port_freeze: ata4 port frozen
[ 0.318331] ahci_do_hardreset: ENTER
[ 0.318372] sata_link_hardreset: ENTER
[ 0.318414] ata_dev_classify: unknown device
[ 0.318452] ahci_do_hardreset: EXIT, rc=0, class=0
[ 0.318499] ata_eh_thaw_port: ata4 port thawed
[ 0.318542] ata_std_postreset: ENTER
[ 0.318585] ata4: SATA link down (SStatus 0 SControl 0)
[ 0.318587] ata_std_postreset: EXIT
[ 0.318632] ata_eh_revalidate_and_attach: ENTER
[ 0.318670] ata_eh_recover: EXIT, rc=0
[ 0.318716] ata_scsi_error: EXIT
[ 0.318769] ata_std_sched_eh: port EH scheduled
[ 0.318809] ata_scsi_error: ENTER
[ 0.318847] ata_eh_link_autopsy: ENTER
[ 0.318884] ata_eh_recover: ENTER
[ 0.318928] __ata_port_freeze: ata5 port frozen
[ 0.318971] ahci_do_hardreset: ENTER
[ 0.319012] sata_link_hardreset: ENTER
[ 0.319056] ata_dev_classify: unknown device
[ 0.319097] ahci_do_hardreset: EXIT, rc=0, class=0
[ 0.319143] ata_eh_thaw_port: ata5 port thawed
[ 0.319182] ata_std_postreset: ENTER
[ 0.319225] ata5: SATA link down (SStatus 0 SControl 0)
[ 0.319226] ata_std_postreset: EXIT
[ 0.319272] ata_eh_revalidate_and_attach: ENTER
[ 0.319318] ata_eh_recover: EXIT, rc=0
[ 0.319360] ata_scsi_error: EXIT
[ 0.319405] ata_std_sched_eh: port EH scheduled
[ 0.319453] ata_scsi_error: ENTER
[ 0.319491] ata_eh_link_autopsy: ENTER
[ 0.319533] ata_eh_recover: ENTER
[ 0.319578] __ata_port_freeze: ata6 port frozen
[ 0.319620] ahci_do_hardreset: ENTER
[ 0.319661] sata_link_hardreset: ENTER
[ 0.319705] ata_dev_classify: unknown device
[ 0.319749] ahci_do_hardreset: EXIT, rc=0, class=0
[ 0.319793] ata_eh_thaw_port: ata6 port thawed
[ 0.319793] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.319831] ata_std_postreset: ENTER
[ 0.319849] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.319872] ata6: SATA link down (SStatus 0 SControl 0)
[ 0.319873] ata_std_postreset: EXIT
[ 0.319914] ata_eh_revalidate_and_attach: ENTER
[ 0.319952] ata_eh_recover: EXIT, rc=0
[ 0.319993] ata_scsi_error: EXIT
[ 0.320034] ata_std_sched_eh: port EH scheduled
[ 0.320073] ata_scsi_error: ENTER
[ 0.320074] i8042: XXX
[ 0.320111] ata_eh_link_autopsy: ENTER
[ 0.320149] ata_eh_recover: ENTER
[ 0.320187] __ata_port_freeze: ata7 port frozen
[ 0.320226] ahci_do_hardreset: ENTER
[ 0.320268] sata_link_hardreset: ENTER
[ 0.320310] ata_dev_classify: found ATA device by sig
[ 0.320349] ahci_do_hardreset: EXIT, rc=0, class=1
[ 0.320388] ahci_softreset: ENTER
[ 0.320435] ahci_do_softreset: ENTER
[ 0.320560] ata_std_sched_eh: port EH scheduled
[ 0.320599] ata_scsi_error: ENTER
[ 0.320637] ata_eh_link_autopsy: ENTER
[ 0.320640] rtc_cmos rtc_cmos: registered as rtc0
[ 0.320675] ata_eh_recover: ENTER
[ 0.320714] __ata_port_freeze: ata8 port frozen
[ 0.320752] ahci_do_hardreset: ENTER
[ 0.320752] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 0.320791] sata_link_hardreset: ENTER
[ 0.320832] ata_dev_classify: unknown device
[ 0.320870] ahci_do_hardreset: EXIT, rc=0, class=0
[ 0.320912] ata_eh_thaw_port: ata8 port thawed
[ 0.320950] ata_std_postreset: ENTER
[ 0.320991] ata8: SATA link down (SStatus 0 SControl 0)
[ 0.320993] ata_std_postreset: EXIT
[ 0.321012] hid: raw HID events driver (C) Jiri Kosina
[ 0.321033] ata_eh_revalidate_and_attach: ENTER
[ 0.321071] ata_eh_recover: EXIT, rc=0
[ 0.321112] ata_scsi_error: EXIT
[ 0.321422] Key type dns_resolver registered
[ 0.321608] microcode: CPU0: patch_level=0x06001119
[ 0.321613] microcode: CPU1: patch_level=0x06001119
[ 0.321616] microcode: Microcode Update Driver: v2.2.
[ 0.321621] IPI shorthand broadcast: enabled
[ 0.321632] sched_clock: Marking stable (318584055, 2908610)->(322960294, -1467629)
[ 0.321724] registered taskstats version 1
[ 0.321907] printk: console [netcon0] enabled
[ 0.321908] netconsole: network logging started
[ 0.327323] ata_dev_classify: found ATA device by sig
[ 0.327368] ahci_do_softreset: EXIT, class=1
[ 0.327410] ata_eh_thaw_port: ata7 port thawed
[ 0.327448] ata_std_postreset: ENTER
[ 0.327489] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 0)
[ 0.327491] ata_std_postreset: EXIT
[ 0.327531] ata_eh_revalidate_and_attach: ENTER
[ 0.327569] ata7.00: ata_dev_read_id: ENTER
[ 0.327959] ata7.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[ 0.327964] ata7.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[ 0.327970] ata_dev_set_xfermode: set features - xfer mode
[ 0.328197] ata_dev_set_xfermode: EXIT, err_mask=0
[ 0.328235] ata7.00: ata_dev_read_id: ENTER
[ 0.328371] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 0.328410] ata7.00: configured for UDMA/133
[ 0.328412] ata_eh_recover: EXIT, rc=0
[ 0.328455] ata_scsi_error: EXIT
[ 0.338889] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
[ 0.339027] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 0.339056] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 0.339065] sd 6:0:0:0: [sda] Write Protect is off
[ 0.339067] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.339076] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.339414] sda: sda1
[ 0.339606] sd 6:0:0:0: [sda] Attached SCSI disk
[ 0.345677] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.350517] random: random: 1
[ 0.350521] random: random: 2
[ 0.350521] random: random: 3
[ 0.350522] random: random: 4
[ 0.350523] random: fast init done
[ 0.398582] EXT4-fs (sda1): recovery complete
[ 0.399318] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 0.399342] VFS: Mounted root (ext4 filesystem) on device 8:1.
[ 0.401175] devtmpfs: mounted
[ 0.401184] After kernel_init_freeable
[ 0.401656] Freeing unused kernel image (initmem) memory: 632K
[ 0.401714] Write protecting kernel text and read-only data: 10048k
[ 0.401715] After mark_readonly
[ 0.401716] After pti_finalize
[ 0.401717] rcu_end_inkernel_boot
[ 0.401722] Run /lib/systemd/systemd as init process
[ 0.401723] with arguments:
[ 0.401723] /lib/systemd/systemd
[ 0.401724] with environment:
[ 0.401725] HOME=/
[ 0.401725] TERM=linux
[ 0.401726] BOOT_IMAGE=/boot/vmlinuz-5.12.0+
[ 0.401727] apparmor=0
[ 0.401727] kmemleak=off
[ 0.401728] initcall_blacklist=serial8250_init
[ 0.401728] acpi=off
[ 0.551178] systemd[1]: Inserted module 'autofs4'
[ 0.556935] NET: Registered protocol family 10
[ 0.557126] Segment Routing with IPv6
[ 0.558860] NET: Registered protocol family 1
[ 0.558925] systemd[1]: Inserted module 'unix'
[ 0.568202] systemd[1]: systemd 247.3-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 0.568294] systemd[1]: Detected architecture x86.
[ 0.569322] systemd[1]: Set hostname to <kodi>.
[ 0.595726] systemd-getty-g (71) used greatest stack depth: 6268 bytes left
[ 0.732306] systemd[1]: Queued start job for default target Graphical Interface.
[ 0.732509] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.732539] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 0.732542] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 0.732706] systemd[1]: Created slice system-getty.slice.
[ 0.732758] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.732833] systemd[1]: Created slice system-modprobe.slice.
[ 0.732850] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.732912] systemd[1]: Created slice User and Session Slice.
[ 0.732998] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 0.733042] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 0.733177] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 0.733206] systemd[1]: Reached target Local Encrypted Volumes.
[ 0.733255] systemd[1]: Reached target Host and Network Name Lookups.
[ 0.733280] systemd[1]: Reached target Slices.
[ 0.733310] systemd[1]: Reached target Swap.
[ 0.735554] systemd[1]: Listening on Process Core Dump Socket.
[ 0.735641] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 0.735784] systemd[1]: Listening on Journal Audit Socket.
[ 0.735868] systemd[1]: Listening on Journal Socket (/dev/log).
[ 0.735961] systemd[1]: Listening on Journal Socket.
[ 0.736083] systemd[1]: Listening on Network Service Netlink Socket.
[ 0.739742] systemd[1]: Listening on udev Control Socket.
[ 0.739877] systemd[1]: Listening on udev Kernel Socket.
[ 0.740410] systemd[1]: Mounting Huge Pages File System...
[ 0.741041] systemd[1]: Mounting POSIX Message Queue File System...
[ 0.741776] systemd[1]: Mounting Kernel Debug File System...
[ 0.742610] systemd[1]: Mounting Kernel Trace File System...
[ 0.745087] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[ 0.745153] systemd[1]: Reached target Local File Systems.
[ 0.745201] systemd[1]: Reached target Containers.
[ 0.745272] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped.
[ 0.746281] systemd[1]: Starting Load Kernel Module configfs...
[ 0.747112] systemd[1]: Starting Load Kernel Module drm...
[ 0.747782] systemd[1]: Starting Load Kernel Module fuse...
[ 0.749699] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 0.749761] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 0.756601] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 0.758420] systemd[1]: Starting Journal Service...
[ 0.758507] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 0.758558] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 0.759851] modprobe (76) used greatest stack depth: 6252 bytes left
[ 0.760012] systemd[1]: Starting Apply Kernel Variables...
[ 0.760684] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 0.761256] mount (74) used greatest stack depth: 5900 bytes left
[ 0.761381] systemd[1]: Starting Coldplug All udev Devices...
[ 0.763204] systemd[1]: Mounted Huge Pages File System.
[ 0.763313] systemd[1]: Mounted POSIX Message Queue File System.
[ 0.763385] systemd[1]: Mounted Kernel Debug File System.
[ 0.763454] systemd[1]: Mounted Kernel Trace File System.
[ 0.763652] systemd[1]: modprobe@configfs.service: Succeeded.
[ 0.763807] systemd[1]: Finished Load Kernel Module configfs.
[ 0.764155] systemd[1]: modprobe@drm.service: Succeeded.
[ 0.764316] systemd[1]: Finished Load Kernel Module drm.
[ 0.764605] systemd[1]: modprobe@fuse.service: Succeeded.
[ 0.764767] systemd[1]: Finished Load Kernel Module fuse.
[ 0.765058] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 0.765136] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 0.772693] systemd[1]: Started Journal Service.
[ 0.826013] systemd-tmpfile (81) used greatest stack depth: 5748 bytes left
[ 0.932701] usbcore: registered new interface driver usbfs
[ 0.932713] usbcore: registered new interface driver hub
[ 0.932725] usbcore: registered new device driver usb
[ 0.943318] xhci_hcd 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.943337] QUIRK: Enable AMD PLL fix
[ 0.943348] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.943354] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.943514] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x0000000000000608
[ 0.943720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 0.943724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.943727] usb usb1: Product: xHCI Host Controller
[ 0.943729] usb usb1: Manufacturer: Linux 5.12.0+ xhci-hcd
[ 0.943730] usb usb1: SerialNumber: 0000:00:10.0
[ 0.943823] hub 1-0:1.0: USB hub found
[ 0.943831] hub 1-0:1.0: 2 ports detected
[ 0.943931] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.943935] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.943938] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 0.947321] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.947351] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12
[ 0.947354] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.947356] usb usb2: Product: xHCI Host Controller
[ 0.947358] usb usb2: Manufacturer: Linux 5.12.0+ xhci-hcd
[ 0.947360] usb usb2: SerialNumber: 0000:00:10.0
[ 0.947468] hub 2-0:1.0: USB hub found
[ 0.947478] hub 2-0:1.0: 2 ports detected
[ 0.947837] xhci_hcd 0000:00:10.1: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 0.947858] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.947864] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.948026] xhci_hcd 0000:00:10.1: hcc params 0x014042c3 hci version 0x96 quirks 0x0000000000000608
[ 0.948232] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 0.948236] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.948238] usb usb3: Product: xHCI Host Controller
[ 0.948240] usb usb3: Manufacturer: Linux 5.12.0+ xhci-hcd
[ 0.948241] usb usb3: SerialNumber: 0000:00:10.1
[ 0.948328] hub 3-0:1.0: USB hub found
[ 0.948336] hub 3-0:1.0: 2 ports detected
[ 0.948433] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.948438] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 0.948441] xhci_hcd 0000:00:10.1: Host supports USB 3.0 SuperSpeed
[ 0.960574] [drm] radeon kernel modesetting enabled.
[ 0.960598] radeon 0000:00:01.0: vgaarb: deactivate vga console
[ 0.967185] Console: switching to colour dummy device 80x25
[ 0.967258] radeon 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.967345] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9996 0x1043:0x8526 0x00).
[ 0.967544] ATOM BIOS: 113
[ 0.967639] radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
[ 0.967643] radeon 0000:00:01.0: GTT: 1024M 0x0000000030000000 - 0x000000006FFFFFFF
[ 0.967650] [drm] Detected VRAM RAM=768M, BAR=256M
[ 0.967651] [drm] RAM width 64bits DDR
[ 0.967672] [drm] radeon: 768M of VRAM memory ready
[ 0.967674] [drm] radeon: 1024M of GTT memory ready.
[ 0.967679] [drm] Loading ARUBA Microcode
[ 0.970114] 1
[ 0.970139] 2
[ 0.970139] 1
[ 0.970151] 2
[ 0.970152] snd_hda_intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.970155] snd_hda_intel 0000:00:01.1: PCI->APIC IRQ transform: INT B -> IRQ 18
[ 0.970161] 3
[ 0.970162] 4
[ 0.970162] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 0.970162] 5
[ 0.970163] 7
[ 0.970163] 3
[ 0.970164] 4
[ 0.970165] 5
[ 0.970165] 8
[ 0.970165] 9
[ 0.970166] 7
[ 0.970170] 8
[ 0.970171] 9
[ 0.970783] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.970816] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12
[ 0.970820] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.970822] usb usb4: Product: xHCI Host Controller
[ 0.970824] usb usb4: Manufacturer: Linux 5.12.0+ xhci-hcd
[ 0.970826] usb usb4: SerialNumber: 0000:00:10.1
[ 0.971735] hub 4-0:1.0: USB hub found
[ 0.971747] hub 4-0:1.0: 2 ports detected
[ 0.971892] xhci_hcd 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.971915] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.971920] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[ 1.031620] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 1.031865] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 1.031869] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.031872] usb usb5: Product: xHCI Host Controller
[ 1.031873] usb usb5: Manufacturer: Linux 5.12.0+ xhci-hcd
[ 1.031875] usb usb5: SerialNumber: 0000:03:00.0
[ 1.031974] hub 5-0:1.0: USB hub found
[ 1.031983] hub 5-0:1.0: 2 ports detected
[ 1.032169] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.032173] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 1.032177] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 1.032200] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.032218] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12
[ 1.032221] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.032223] usb usb6: Product: xHCI Host Controller
[ 1.032225] usb usb6: Manufacturer: Linux 5.12.0+ xhci-hcd
[ 1.032226] usb usb6: SerialNumber: 0000:03:00.0
[ 1.032290] hub 6-0:1.0: USB hub found
[ 1.032297] hub 6-0:1.0: 2 ports detected
[ 1.034493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.035149] ata_scsi_translate: EXIT - defer
[ 1.035184] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 1.035189] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.035191] snd_hda_codec_generic hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.035194] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
[ 1.035195] snd_hda_codec_generic hdaudioC1D0: dig-out=0x3/0x5
[ 1.035197] snd_hda_codec_generic hdaudioC1D0: inputs:
[ 1.035520] ata_scsi_translate: EXIT - defer
[ 1.035532] ata_scsi_translate: EXIT - defer
[ 1.035997] input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:01.1/sound/card1/input3
[ 1.036094] input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:01.1/sound/card1/input4
[ 1.036440] ata_scsi_translate: EXIT - defer
[ 1.037219] ata_scsi_translate: EXIT - defer
[ 1.038016] ata_scsi_translate: EXIT - defer
[ 1.038296] ata_scsi_translate: EXIT - defer
[ 1.038327] ata_scsi_translate: EXIT - defer
[ 1.038569] ata_scsi_translate: EXIT - defer
[ 1.038574] ata_scsi_translate: EXIT - defer
[ 1.038590] ehci-pci: EHCI PCI platform driver
[ 1.038637] ehci-pci 0000:00:12.2: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 1.038667] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.038673] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 7
[ 1.038680] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.038689] ehci-pci 0000:00:12.2: debug port 1
[ 1.039096] ehci-pci 0000:00:13.2: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 1.039281] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4e000
[ 1.041323] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.041812] [drm] Internal thermal controller without fan control
[ 1.041944] [drm] radeon: dpm initialized
[ 1.042437] ohci-pci: OHCI PCI platform driver
[ 1.044509] ohci-pci 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.045667] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.045736] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 1.045740] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.045743] usb usb7: Product: EHCI Host Controller
[ 1.045745] usb usb7: Manufacturer: Linux 5.12.0+ ehci_hcd
[ 1.045747] usb usb7: SerialNumber: 0000:00:12.2
[ 1.045854] hub 7-0:1.0: USB hub found
[ 1.045862] hub 7-0:1.0: 5 ports detected
[ 1.046035] ohci-pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.046056] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.046062] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 1.060723] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 1.081593] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4d000
[ 1.082955] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.083647] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 1.083658] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.083663] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.083667] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 1.083670] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 1.083674] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 1.083676] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 1.083678] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 1.083680] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 1.112483] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 1.112538] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 1.112580] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 1.112633] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 1.112675] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 1.112715] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 1.112755] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 1.112797] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 1.127489] r8169 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.143059] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12
[ 1.143066] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.143068] usb usb8: Product: OHCI PCI host controller
[ 1.143070] usb usb8: Manufacturer: Linux 5.12.0+ ohci_hcd
[ 1.143072] usb usb8: SerialNumber: 0000:00:13.0
[ 1.143184] hub 8-0:1.0: USB hub found
[ 1.143193] hub 8-0:1.0: 5 ports detected
[ 1.143414] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.143420] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 9
[ 1.143424] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.143435] ehci-pci 0000:00:13.2: debug port 1
[ 1.143461] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4c000
[ 1.147902] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144
[ 1.149530] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.149586] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 1.149589] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.149592] usb usb9: Product: EHCI Host Controller
[ 1.149593] usb usb9: Manufacturer: Linux 5.12.0+ ehci_hcd
[ 1.149595] usb usb9: SerialNumber: 0000:00:13.2
[ 1.149703] hub 9-0:1.0: USB hub found
[ 1.149710] hub 9-0:1.0: 5 ports detected
[ 1.151155] [drm] GART: Done restoring entries
[ 1.151160] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[ 1.151289] libphy: r8169: probed
[ 1.153655] r8169 0000:04:00.0 eth0: RTL8168f/8111f, 08:60:6e:74:7a:51, XID 480, IRQ 38
[ 1.153663] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.157746] radeon 0000:00:01.0: WB enabled
[ 1.157751] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00
[ 1.158145] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 1.164580] hub 8-0:1.0: USB hub found
[ 1.164593] hub 8-0:1.0: 5 ports detected
[ 1.164750] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.164756] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 10
[ 1.186529] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4f000
[ 1.188405] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000030000c18
[ 1.188409] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000030000c1c
[ 1.188411] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04
[ 1.188413] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08
[ 1.188415] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c
[ 1.188417] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10
[ 1.200123] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 1.200165] radeon 0000:00:01.0: radeon: using MSI.
[ 1.200189] [drm] radeon: irq initialized.
[ 1.218641] [drm] ring test on 0 succeeded in 2 usecs
[ 1.218651] [drm] ring test on 3 succeeded in 3 usecs
[ 1.218657] [drm] ring test on 4 succeeded in 3 usecs
[ 1.233037] [drm] ring test on 5 succeeded in 2 usecs
[ 1.235692] [drm] UVD initialized successfully.
[ 1.242570] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12
[ 1.242576] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.242579] usb usb10: Product: OHCI PCI host controller
[ 1.242582] usb usb10: Manufacturer: Linux 5.12.0+ ohci_hcd
[ 1.242584] usb usb10: SerialNumber: 0000:00:12.0
[ 1.242699] hub 10-0:1.0: USB hub found
[ 1.242707] hub 10-0:1.0: 5 ports detected
[ 1.346810] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x707257b541d, max_idle_ns: 881591184336 ns
[ 1.346828] clocksource: Switched to clocksource tsc
[ 1.348535] [drm] ring test on 6 succeeded in 17 usecs
[ 1.348551] [drm] ring test on 7 succeeded in 4 usecs
[ 1.348552] [drm] VCE initialized successfully.
[ 1.348646] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.348702] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.348854] [drm] ib test on ring 4 succeeded in 0 usecs
[ 1.368874] [drm] ib test on ring 5 succeeded
[ 1.381874] [drm] ib test on ring 6 succeeded in 1 usecs
[ 1.392872] [drm] ib test on ring 7 succeeded in 1 usecs
[ 1.393163] [drm] Radeon Display Connectors
[ 1.393165] [drm] Connector 0:
[ 1.393166] [drm] DP-1
[ 1.393167] [drm] HPD1
[ 1.393168] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 1.393170] [drm] Encoders:
[ 1.393171] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.393173] [drm] Connector 1:
[ 1.393174] [drm] VGA-1
[ 1.393174] [drm] HPD2
[ 1.393175] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 1.393178] [drm] Encoders:
[ 1.393179] [drm] CRT1: INTERNAL_UNIPHY2
[ 1.393180] [drm] CRT1: NUTMEG
[ 1.393181] [drm] Connector 2:
[ 1.393182] [drm] HDMI-A-1
[ 1.393182] [drm] HPD3
[ 1.393183] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 1.393185] [drm] Encoders:
[ 1.393186] [drm] DFP2: INTERNAL_UNIPHY
[ 1.494266] usb 10-1: new low-speed USB device number 2 using ohci-pci
[ 1.517757] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 1.540884] RTL8211E Gigabit Ethernet r8169-400:00: attached PHY driver (mii_bus:phy_addr=r8169-400:00, irq=MAC)
[ 1.555232] [drm] fb mappable at 0xC03E9000
[ 1.555237] [drm] vram apper at 0xC0000000
[ 1.555238] [drm] size 5242880
[ 1.555239] [drm] fb depth is 24
[ 1.555240] [drm] pitch is 5120
[ 1.555303] fbcon: radeondrmfb (fb0) is primary device
[ 1.597225] ata_scsi_translate: EXIT - defer
[ 1.600413] ata_scsi_translate: EXIT - defer
[ 1.601079] ata_scsi_translate: EXIT - defer
[ 1.601519] ata_scsi_translate: EXIT - defer
[ 1.602410] ata_scsi_translate: EXIT - defer
[ 1.604463] ata_scsi_translate: EXIT - defer
[ 1.647766] Console: switching to colour frame buffer device 160x64
[ 1.651815] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[ 1.655903] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 1.659603] usb 10-1: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01
[ 1.659610] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.659612] usb 10-1: Product: Dell QuietKey Keyboard
[ 1.659614] usb 10-1: Manufacturer: DELL
[ 1.679770] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:12.0/usb10/10-1/10-1:1.0/0003:413C:2106.0001/input/input13
[ 1.731047] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:12.0-1/input0
[ 1.731086] usbcore: registered new interface driver usbhid
[ 1.731088] usbhid: USB HID core driver
[ 1.774104] r8169 0000:04:00.0 enp4s0: Link is Down
[ 1.778822] NET: Registered protocol family 17
[ 2.162959] usb 10-2: new low-speed USB device number 3 using ohci-pci
[ 2.272585] ata_scsi_translate: EXIT - defer
[ 2.275179] ata_scsi_translate: EXIT - defer
[ 2.275944] ata_scsi_translate: EXIT - defer
[ 2.276109] ata_scsi_translate: EXIT - defer
[ 2.313813] ata_scsi_translate: EXIT - defer
[ 2.319170] ata_scsi_translate: EXIT - defer
[ 2.319301] ata_scsi_translate: EXIT - defer
[ 2.320411] ata_scsi_translate: EXIT - defer
[ 2.334472] usb 10-2: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40
[ 2.334480] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.334482] usb 10-2: Product: Optical USB Mouse
[ 2.334484] usb 10-2: Manufacturer: Logitech
[ 2.341723] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb10/10-2/10-2:1.0/0003:046D:C016.0002/input/input14
[ 2.341941] hid-generic 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-2/input0
[ 2.398607] ata_scsi_translate: EXIT - defer
[ 2.428129] ata_scsi_translate: EXIT - defer
[ 2.429585] ata_scsi_translate: EXIT - defer
[ 2.431423] ata_scsi_translate: EXIT - defer
[ 2.449175] ata_scsi_translate: EXIT - defer
[ 2.449669] ata_scsi_translate: EXIT - defer
[ 2.450708] ata_scsi_translate: EXIT - defer
[ 2.452628] ata_scsi_translate: EXIT - defer
[ 2.453358] ata_scsi_translate: EXIT - defer
[ 2.457963] ata_scsi_translate: EXIT - defer
[ 2.458106] ata_scsi_translate: EXIT - defer
[ 2.458695] ata_scsi_translate: EXIT - defer
[ 2.459163] ata_scsi_translate: EXIT - defer
[ 2.459770] ata_scsi_translate: EXIT - defer
[ 2.459969] ata_scsi_translate: EXIT - defer
[ 2.463399] ata_scsi_translate: EXIT - defer
[ 2.466883] ata_scsi_translate: EXIT - defer
[ 2.467528] ata_scsi_translate: EXIT - defer
[ 2.480514] ata_scsi_translate: EXIT - defer
[ 2.481082] ata_scsi_translate: EXIT - defer
[ 2.481699] ata_scsi_translate: EXIT - defer
[ 2.482306] ata_scsi_translate: EXIT - defer
[ 2.482517] ata_scsi_translate: EXIT - defer
[ 2.482786] ata_scsi_translate: EXIT - defer
[ 2.483860] ata_scsi_translate: EXIT - defer
[ 2.483960] ata_scsi_translate: EXIT - defer
[ 2.484318] ata_scsi_translate: EXIT - defer
[ 2.485247] ata_scsi_translate: EXIT - defer
[ 2.521618] ata_scsi_translate: EXIT - defer
[ 2.522088] ata_scsi_translate: EXIT - defer
[ 2.523774] ata_scsi_translate: EXIT - defer
[ 2.527019] ata_scsi_translate: EXIT - defer
[ 2.528152] ata_scsi_translate: EXIT - defer
[ 2.528514] ata_scsi_translate: EXIT - defer
[ 2.532779] ata_scsi_translate: EXIT - defer
[ 2.543983] ata_scsi_translate: EXIT - defer
[ 2.547250] ata_scsi_translate: EXIT - defer
[ 2.547512] ata_scsi_translate: EXIT - defer
[ 2.550494] ata_scsi_translate: EXIT - defer
[ 2.550962] ata_scsi_translate: EXIT - defer
[ 2.551244] ata_scsi_translate: EXIT - defer
[ 2.551548] ata_scsi_translate: EXIT - defer
[ 2.552841] ata_scsi_translate: EXIT - defer
[ 2.556493] ata_scsi_translate: EXIT - defer
[ 2.556918] ata_scsi_translate: EXIT - defer
[ 2.558573] ata_scsi_translate: EXIT - defer
[ 2.559385] ata_scsi_translate: EXIT - defer
[ 2.559759] ata_scsi_translate: EXIT - defer
[ 2.560049] ata_scsi_translate: EXIT - defer
[ 2.560470] ata_scsi_translate: EXIT - defer
[ 2.560785] ata_scsi_translate: EXIT - defer
[ 2.571774] ata_scsi_translate: EXIT - defer
[ 2.571980] ata_scsi_translate: EXIT - defer
[ 2.573834] ata_scsi_translate: EXIT - defer
[ 2.574409] ata_scsi_translate: EXIT - defer
[ 2.574657] ata_scsi_translate: EXIT - defer
[ 2.576667] ata_scsi_translate: EXIT - defer
[ 2.576808] ata_scsi_translate: EXIT - defer
[ 2.577151] ata_scsi_translate: EXIT - defer
[ 2.577533] ata_scsi_translate: EXIT - defer
[ 2.580527] ata_scsi_translate: EXIT - defer
[ 2.580650] ata_scsi_translate: EXIT - defer
[ 2.581087] ata_scsi_translate: EXIT - defer
[ 2.581614] ata_scsi_translate: EXIT - defer
[ 2.581707] ata_scsi_translate: EXIT - defer
[ 2.581924] ata_scsi_translate: EXIT - defer
[ 2.582102] ata_scsi_translate: EXIT - defer
[ 2.582443] ata_scsi_translate: EXIT - defer
[ 2.597978] ata_scsi_translate: EXIT - defer
[ 2.599913] ata_scsi_translate: EXIT - defer
[ 2.600119] ata_scsi_translate: EXIT - defer
[ 2.600367] ata_scsi_translate: EXIT - defer
[ 2.600516] ata_scsi_translate: EXIT - defer
[ 2.601003] ata_scsi_translate: EXIT - defer
[ 2.603647] ata_scsi_translate: EXIT - defer
[ 2.614412] ata_scsi_translate: EXIT - defer
[ 2.623907] ata_scsi_translate: EXIT - defer
[ 2.624968] ata_scsi_translate: EXIT - defer
[ 2.625283] ata_scsi_translate: EXIT - defer
[ 2.625480] ata_scsi_translate: EXIT - defer
[ 2.625536] ata_scsi_translate: EXIT - defer
[ 2.625823] ata_scsi_translate: EXIT - defer
[ 2.649646] ata_scsi_translate: EXIT - defer
[ 2.651157] ata_scsi_translate: EXIT - defer
[ 2.651274] ata_scsi_translate: EXIT - defer
[ 2.662003] ata_scsi_translate: EXIT - defer
[ 2.662321] ata_scsi_translate: EXIT - defer
[ 2.663151] ata_scsi_translate: EXIT - defer
[ 2.663350] ata_scsi_translate: EXIT - defer
[ 2.664073] ata_scsi_translate: EXIT - defer
[ 2.664587] ata_scsi_translate: EXIT - defer
[ 2.678435] ata_scsi_translate: EXIT - defer
[ 2.679176] ata_scsi_translate: EXIT - defer
[ 2.680036] ata_scsi_translate: EXIT - defer
[ 2.682355] ata_scsi_translate: EXIT - defer
[ 2.683777] ata_scsi_translate: EXIT - defer
[ 2.684547] ata_scsi_translate: EXIT - defer
[ 2.685028] ata_scsi_translate: EXIT - defer
[ 2.685553] ata_scsi_translate: EXIT - defer
[ 2.686266] ata_scsi_translate: EXIT - defer
[ 2.686440] ata_scsi_translate: EXIT - defer
[ 2.687180] ata_scsi_translate: EXIT - defer
[ 2.687452] ata_scsi_translate: EXIT - defer
[ 2.773795] ata_scsi_translate: EXIT - defer
[ 2.774683] ata_scsi_translate: EXIT - defer
[ 2.774869] ata_scsi_translate: EXIT - defer
[ 2.776009] ata_scsi_translate: EXIT - defer
[ 2.776092] ata_scsi_translate: EXIT - defer
[ 2.776921] ata_scsi_translate: EXIT - defer
[ 2.781672] ata_scsi_translate: EXIT - defer
[ 2.783813] ata_scsi_translate: EXIT - defer
[ 2.784336] ata_scsi_translate: EXIT - defer
[ 2.785775] ata_scsi_translate: EXIT - defer
[ 2.786355] ata_scsi_translate: EXIT - defer
[ 2.786519] ata_scsi_translate: EXIT - defer
[ 2.786717] ata_scsi_translate: EXIT - defer
[ 2.786786] ata_scsi_translate: EXIT - defer
[ 2.787070] ata_scsi_translate: EXIT - defer
[ 2.793208] ata_scsi_translate: EXIT - defer
[ 2.793422] ata_scsi_translate: EXIT - defer
[ 2.796963] ata_scsi_translate: EXIT - defer
[ 2.797355] ata_scsi_translate: EXIT - defer
[ 2.798181] ata_scsi_translate: EXIT - defer
[ 2.798614] ata_scsi_translate: EXIT - defer
[ 2.798645] ata_scsi_translate: EXIT - defer
[ 2.809739] ata_scsi_translate: EXIT - defer
[ 2.809945] ata_scsi_translate: EXIT - defer
[ 2.810115] ata_scsi_translate: EXIT - defer
[ 2.810197] ata_scsi_translate: EXIT - defer
[ 2.810499] ata_scsi_translate: EXIT - defer
[ 2.812139] ata_scsi_translate: EXIT - defer
[ 2.842645] ata_scsi_translate: EXIT - defer
[ 2.845992] ata_scsi_translate: EXIT - defer
[ 2.846693] ata_scsi_translate: EXIT - defer
[ 2.850225] ata_scsi_translate: EXIT - defer
[ 2.857330] ata_scsi_translate: EXIT - defer
[ 2.857426] ata_scsi_translate: EXIT - defer
[ 2.864862] ata_scsi_translate: EXIT - defer
[ 2.866223] ata_scsi_translate: EXIT - defer
[ 2.866490] ata_scsi_translate: EXIT - defer
[ 2.871742] ata_scsi_translate: EXIT - defer
[ 2.872223] ata_scsi_translate: EXIT - defer
[ 2.874367] ata_scsi_translate: EXIT - defer
[ 2.874833] ata_scsi_translate: EXIT - defer
[ 2.875392] ata_scsi_translate: EXIT - defer
[ 2.876229] ata_scsi_translate: EXIT - defer
[ 2.876405] ata_scsi_translate: EXIT - defer
[ 2.876574] ata_scsi_translate: EXIT - defer
[ 2.876644] ata_scsi_translate: EXIT - defer
[ 2.878149] ata_scsi_translate: EXIT - defer
[ 2.884172] ata_scsi_translate: EXIT - defer
[ 2.884431] ata_scsi_translate: EXIT - defer
[ 2.885592] ata_scsi_translate: EXIT - defer
[ 2.888631] ata_scsi_translate: EXIT - defer
[ 2.889146] ata_scsi_translate: EXIT - defer
[ 2.890240] ata_scsi_translate: EXIT - defer
[ 2.891398] ata_scsi_translate: EXIT - defer
[ 2.892616] ata_scsi_translate: EXIT - defer
[ 2.908474] ata_scsi_translate: EXIT - defer
[ 2.909774] ata_scsi_translate: EXIT - defer
[ 2.924350] ata_scsi_translate: EXIT - defer
[ 2.924909] ata_scsi_translate: EXIT - defer
[ 2.925489] ata_scsi_translate: EXIT - defer
[ 2.926541] ata_scsi_translate: EXIT - defer
[ 2.926777] ata_scsi_translate: EXIT - defer
[ 2.934815] ata_scsi_translate: EXIT - defer
[ 2.935004] ata_scsi_translate: EXIT - defer
[ 2.937908] ata_scsi_translate: EXIT - defer
[ 2.938340] ata_scsi_translate: EXIT - defer
[ 2.944516] ata_scsi_translate: EXIT - defer
[ 2.946574] ata_scsi_translate: EXIT - defer
[ 2.947001] ata_scsi_translate: EXIT - defer
[ 2.947356] ata_scsi_translate: EXIT - defer
[ 2.947473] ata_scsi_translate: EXIT - defer
[ 2.947559] ata_scsi_translate: EXIT - defer
[ 2.947776] ata_scsi_translate: EXIT - defer
[ 2.953013] ata_scsi_translate: EXIT - defer
[ 2.957776] ata_scsi_translate: EXIT - defer
[ 2.957882] ata_scsi_translate: EXIT - defer
[ 2.958348] ata_scsi_translate: EXIT - defer
[ 2.959475] ata_scsi_translate: EXIT - defer
[ 2.960148] ata_scsi_translate: EXIT - defer
[ 2.960199] ata_scsi_translate: EXIT - defer
[ 2.960271] ata_scsi_translate: EXIT - defer
[ 2.960531] ata_scsi_translate: EXIT - defer
[ 2.967741] ata_scsi_translate: EXIT - defer
[ 2.969755] ata_scsi_translate: EXIT - defer
[ 2.971594] ata_scsi_translate: EXIT - defer
[ 2.976559] ata_scsi_translate: EXIT - defer
[ 2.976701] ata_scsi_translate: EXIT - defer
[ 2.977676] ata_scsi_translate: EXIT - defer
[ 2.977754] ata_scsi_translate: EXIT - defer
[ 2.978196] ata_scsi_translate: EXIT - defer
[ 3.005778] ata_scsi_translate: EXIT - defer
[ 3.007740] ata_scsi_translate: EXIT - defer
[ 3.008321] ata_scsi_translate: EXIT - defer
[ 3.010101] ata_scsi_translate: EXIT - defer
[ 3.011389] ata_scsi_translate: EXIT - defer
[ 3.011629] ata_scsi_translate: EXIT - defer
[ 3.012101] ata_scsi_translate: EXIT - defer
[ 3.012184] ata_scsi_translate: EXIT - defer
[ 3.012516] ata_scsi_translate: EXIT - defer
[ 3.295487] random: crng init done
[ 3.295492] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.276620] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 4.276633] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 6.051394] systemd-udevd (92) used greatest stack depth: 5220 bytes left
[ 6.052101] systemd-udevd (93) used greatest stack depth: 4796 bytes left