Re: [PATCH AUTOSEL 4.19 06/21] usb: dwc3: gadget: Ignore EP queue requests during bus reset

[Pavel Machek]

Hi!

> [ Upstream commit 71ca43f30df9c642970f9dc9b2d6f463f4967e7b ]
> 
> The current dwc3_gadget_reset_interrupt() will stop any active
> transfers, but only addresses blocking of EP queuing for while we are
> coming from a disconnected scenario, i.e. after receiving the disconnect
> event.  If the host decides to issue a bus reset on the device, the
> connected parameter will still be set to true, allowing for EP queuing
> to continue while we are disabling the functions.  To avoid this, set the
> connected flag to false until the stop active transfers is complete.

This is mismerged / crazy. Will probably break the driver completely.


> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2717,6 +2717,15 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
>  
>  	dwc->connected = true;
>  
> +	/*
> +	 * Ideally, dwc3_reset_gadget() would trigger the function
> +	 * drivers to stop any active transfers through ep disable.
> +	 * However, for functions which defer ep disable, such as mass
> +	 * storage, we will need to rely on the call to stop active
> +	 * transfers here, and avoid allowing of request queuing.
> +	 */
> +	dwc->connected = false;
> +
>  	/*
>  	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
>  	 * would cause a missing Disconnect Event if there's a

See how connected = true is immediately overwritten? In mainline
= true assignment is done below, so it does not have this problem.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Attachment: signature.asc
Description: PGP signature