[PATCH 04/10] watchdog: keembay: Clear either the TO or TH interrupt bit

[shruthi . sanil]

From: Shruthi Sanil <shruthi.sanil@xxxxxxxxx>

During the interrupt service routine of the TimeOut interrupt and
the ThresHold interrupt, the respective interrupt clear bit
have to be cleared and not both.

Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay Soc")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Tested-by: Kris Pan <kris.pan@xxxxxxxxx>
Signed-off-by: Shruthi Sanil <shruthi.sanil@xxxxxxxxx>
---
 drivers/watchdog/keembay_wdt.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/keembay_wdt.c b/drivers/watchdog/keembay_wdt.c
index 6053416b8d3d..f2a16c9933c3 100644
--- a/drivers/watchdog/keembay_wdt.c
+++ b/drivers/watchdog/keembay_wdt.c
@@ -23,7 +23,8 @@
 #define TIM_WDOG_EN		0x8
 #define TIM_SAFE		0xc
 
-#define WDT_ISR_MASK		GENMASK(9, 8)
+#define WDT_TH_INT_MASK		BIT(8)
+#define WDT_TO_INT_MASK		BIT(9)
 #define WDT_ISR_CLEAR		0x8200ff18
 #define WDT_UNLOCK		0xf1d0dead
 #define WDT_LOAD_MAX		U32_MAX
@@ -142,7 +143,7 @@ static irqreturn_t keembay_wdt_to_isr(int irq, void *dev_id)
 	struct arm_smccc_res res;
 
 	keembay_wdt_writel(wdt, TIM_WATCHDOG, 1);
-	arm_smccc_smc(WDT_ISR_CLEAR, WDT_ISR_MASK, 0, 0, 0, 0, 0, 0, &res);
+	arm_smccc_smc(WDT_ISR_CLEAR, WDT_TO_INT_MASK, 0, 0, 0, 0, 0, 0, &res);
 	dev_crit(wdt->wdd.parent, "Intel Keem Bay non-sec wdt timeout.\n");
 	emergency_restart();
 
@@ -156,7 +157,7 @@ static irqreturn_t keembay_wdt_th_isr(int irq, void *dev_id)
 
 	keembay_wdt_set_pretimeout(&wdt->wdd, 0x0);
 
-	arm_smccc_smc(WDT_ISR_CLEAR, WDT_ISR_MASK, 0, 0, 0, 0, 0, 0, &res);
+	arm_smccc_smc(WDT_ISR_CLEAR, WDT_TH_INT_MASK, 0, 0, 0, 0, 0, 0, &res);
 	dev_crit(wdt->wdd.parent, "Intel Keem Bay non-sec wdt pre-timeout.\n");
 	watchdog_notify_pretimeout(&wdt->wdd);
 
-- 
2.17.1