[PATCH v2 4/4] usb: typec: tcpci: Implement callback for apply_rc

From: Badhri Jagan Sridharan
Date: Mon May 17 2021 - 15:21:38 EST


APPLY RC is defined as ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2 and
POWER_CONTROL.AutodischargeDisconnect is 0. When ROLE_CONTROL.CC1 ==
ROLE_CONTROL.CC2, set the other CC to OPEN.

Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support")
Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
Changes since V1:
- Added Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/usb/typec/tcpm/tcpci.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 25b480752266..34b5095cc84f 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -115,6 +115,32 @@ static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc)
return 0;
}

+int tcpci_apply_rc(struct tcpc_dev *tcpc, enum typec_cc_status cc, enum typec_cc_polarity polarity)
+{
+ struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &reg);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * APPLY_RC state is when ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2 and vbus autodischarge on
+ * disconnect is disabled. Bail out when ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2.
+ */
+ if (((reg & (TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT)) >>
+ TCPC_ROLE_CTRL_CC2_SHIFT) !=
+ ((reg & (TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT)) >>
+ TCPC_ROLE_CTRL_CC1_SHIFT))
+ return 0;
+
+ return regmap_update_bits(tcpci->regmap, TCPC_ROLE_CTRL, polarity == TYPEC_POLARITY_CC1 ?
+ TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT :
+ TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT,
+ TCPC_ROLE_CTRL_CC_OPEN);
+}
+
static int tcpci_start_toggling(struct tcpc_dev *tcpc,
enum typec_port_type port_type,
enum typec_cc_status cc)
@@ -728,6 +754,7 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
tcpci->tcpc.get_vbus = tcpci_get_vbus;
tcpci->tcpc.set_vbus = tcpci_set_vbus;
tcpci->tcpc.set_cc = tcpci_set_cc;
+ tcpci->tcpc.apply_rc = tcpci_apply_rc;
tcpci->tcpc.get_cc = tcpci_get_cc;
tcpci->tcpc.set_polarity = tcpci_set_polarity;
tcpci->tcpc.set_vconn = tcpci_set_vconn;
--
2.31.1.751.gd2f1c929bd-goog