Re: [PATCH v3 7/7] bindings: ipmi: Add binding for Aspeed SSIF BMC driver

[Rob Herring]

On Wed, 19 May 2021 14:49:34 +0700, Quan Nguyen wrote:
> Add device tree binding document for the Aspeed SSIF BMC driver.
> 
> Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
> ---
> v3:
>   + Switched to use DT schema format [Rob]
> 
>  .../bindings/ipmi/aspeed-ssif-bmc.yaml        | 33 +++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dts:21.13-26: Warning (reg_format): /example-0/ssif-bmc@10:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: example-0: ssif-bmc@10:reg:0: [16] is too short
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

See https://patchwork.ozlabs.org/patch/1480727

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.