Re: [PATCH 3/6] clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC

From: Cristian Ciocaltea
Date: Thu May 27 2021 - 09:35:03 EST


On Wed, May 26, 2021 at 03:48:30PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Mar 16, 2021 at 08:37:53PM +0200, Cristian Ciocaltea wrote:
> > On Tue, Mar 16, 2021 at 09:47:39AM +0530, Manivannan Sadhasivam wrote:
> > > On Mon, Mar 08, 2021 at 07:18:28PM +0200, Cristian Ciocaltea wrote:
> > > > The following clocks of the Actions Semi Owl S500 SoC have been defined
> > > > to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE,
> > > > VDE, BISP, SENSOR[0-1]
> > > >
> > > > There are several issues involved in this approach:
> > > >
> > > > * 'bisp_factor_table[]' describes the configuration of a regular 8-rates
> > > > divider, so its usage is redundant. Additionally, judging by the BISP
> > > > clock context, it is incomplete since it maps only 8 out of 12
> > > > possible entries.
> > > >
> > > > * The clocks mentioned above are not identical in terms of the available
> > > > rates, therefore cannot rely on the same factor table. Specifically,
> > > > BISP and SENSOR* are standard 12-rate dividers so their configuration
> > > > should rely on a proper clock div table, while VCE and VDE require a
> > > > factor table that is a actually a subset of the one needed for DE[1-2]
> > > > clocks.
> > > >
> > > > Let's fix this by implementing the following:
> > > >
> > > > * Add new factor tables 'de_factor_table' and 'hde_factor_table' to
> > > > properly handle DE[1-2], VCE and VDE clocks.
> > > >
> > > > * Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1]
> > > > clocks converted to OWL_COMP_DIV.
> > > >
> > > > * Drop the now unused 'bisp_factor_table[]'.
> > > >
> > >
> > > Nice!
> > >
> > > > Additionally, since SENSOR[0-1] are not gated, unset the OWL_GATE_HW
> > > > configuration and drop the CLK_IGNORE_UNUSED flag in their definitions.
> > > >
> > >
> > > No. You should not screen the functionality exposed by the hw, that's what the
> > > purpose of these CLK_ flags.
> >
> > I'm not sure I get this, or maybe I wasn't clear enough with my
> > explanation regarding the changes to SENSOR clocks: they are not gated
> > in hardware, hence the statement 'OWL_GATE_HW(CMU_DEVCLKEN0, 14, 0)'
> > was invalid and I replaced it with '{ 0 }'.
> >
>
> This clock is gated in hw as per the datasheet. Again, please don't make
> judgements based on the vendor code as it is not upto date with HW. I
> know it is silly but that's how things are...

Indeed, a newer datasheet states the clock is gated. I fixed the patch
accordingly in v2.

> > Additionally, I assumed the 'CLK_IGNORE_UNUSED' flag makes sense only
> > for the gated clocks. Do I miss something?
> >
>
> CLK_IGNORE_UNUSED is used by the clk framework to essentially skip
> gating the clocks which are turned ON by the bootloader and there is no
> other driver using it. But I think you can remove this flag because
> there is no reason to leave this specific clock to be ON always.

Thanks for the explanation, I kept the flag removed in v2.

Regards,
Cristi

> Thanks,
> Mani
>
> > > Other than that, this patch looks good to me.
> >
> > Thanks,
> > Cristi
> >
> > [...]