[PATCH 06/11] drm/ingenic: Set DMA descriptor chain register when starting CRTC

[Paul Cercueil]

Setting the DMA descriptor chain register in the probe function has been
fine until now, because we only ever had one descriptor per foreground.

As the driver will soon have real descriptor chains, and the DMA
descriptor chain register updates itself to point to the current
descriptor being processed, this register needs to be reset after a full
modeset to point to the first descriptor of the chain.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 639994329c60..5ba3283da97d 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -210,6 +210,10 @@ static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 
 	regmap_write(priv->map, JZ_REG_LCD_STATE, 0);
 
+	/* Set address of our DMA descriptor chain */
+	regmap_write(priv->map, JZ_REG_LCD_DA0, dma_hwdesc_addr(priv, 0));
+	regmap_write(priv->map, JZ_REG_LCD_DA1, dma_hwdesc_addr(priv, 1));
+
 	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
 			   JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE,
 			   JZ_LCD_CTRL_ENABLE);
@@ -1218,10 +1222,6 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
 		}
 	}
 
-	/* Set address of our DMA descriptor chain */
-	regmap_write(priv->map, JZ_REG_LCD_DA0, dma_hwdesc_phys_f0);
-	regmap_write(priv->map, JZ_REG_LCD_DA1, dma_hwdesc_phys_f1);
-
 	/* Enable OSD if available */
 	if (soc_info->has_osd)
 		regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
-- 
2.30.2