[PATCH 6/8] MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc
From: Paul Cercueil
Date: Sun May 30 2021 - 13:19:02 EST
The "ingenic,jz4780-i2c" should have "ingenic,jz4770-i2c" as a fallback
compatible, as per the Device Tree documentation found in
Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
arch/mips/boot/dts/ingenic/jz4780.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 8d01feef7ff5..9e34f433b9b5 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -339,7 +339,7 @@ uart4: serial@10034000 {
};
i2c0: i2c@10050000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -357,7 +357,7 @@ i2c0: i2c@10050000 {
};
i2c1: i2c@10051000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10051000 0x1000>;
@@ -374,7 +374,7 @@ i2c1: i2c@10051000 {
};
i2c2: i2c@10052000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10052000 0x1000>;
@@ -391,7 +391,7 @@ i2c2: i2c@10052000 {
};
i2c3: i2c@10053000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10053000 0x1000>;
@@ -408,7 +408,7 @@ i2c3: i2c@10053000 {
};
i2c4: i2c@10054000 {
- compatible = "ingenic,jz4780-i2c";
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10054000 0x1000>;
--
2.30.2