[PATCH net-next] stmmac: align RX buffers

From: Matteo Croce
Date: Sun Jun 13 2021 - 22:27:12 EST


From: Matteo Croce <mcroce@xxxxxxxxxxxxx>

On RX an SKB is allocated and the received buffer is copied into it.
But on some architectures, the memcpy() needs the source and destination
buffers to have the same alignment to be efficient.

This is not our case, because SKB data pointer is misaligned by two bytes
to compensate the ethernet header.

Align the RX buffer the same way as the SKB one, so the copy is faster.
An iperf3 RX test gives a decent improvement on a RISC-V machine:

before:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 733 MBytes 615 Mbits/sec 88 sender
[ 5] 0.00-10.01 sec 730 MBytes 612 Mbits/sec receiver

after:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 1.09 GBytes 940 Mbits/sec receiver

And the memcpy() overhead during the RX drops dramatically.

before:
Overhead Shared O Symbol
43.35% [kernel] [k] memcpy
33.77% [kernel] [k] __asm_copy_to_user
3.64% [kernel] [k] sifive_l2_flush64_range

after:
Overhead Shared O Symbol
45.40% [kernel] [k] __asm_copy_to_user
28.09% [kernel] [k] memcpy
4.27% [kernel] [k] sifive_l2_flush64_range

Signed-off-by: Matteo Croce <mcroce@xxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b6cd43eda7ac..04bdb3950d63 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -338,9 +338,9 @@ static inline bool stmmac_xdp_is_enabled(struct stmmac_priv *priv)
static inline unsigned int stmmac_rx_offset(struct stmmac_priv *priv)
{
if (stmmac_xdp_is_enabled(priv))
- return XDP_PACKET_HEADROOM;
+ return XDP_PACKET_HEADROOM + NET_IP_ALIGN;

- return 0;
+ return NET_SKB_PAD + NET_IP_ALIGN;
}

void stmmac_disable_rx_queue(struct stmmac_priv *priv, u32 queue);
--
2.31.1