Re: [PATCH v4 0/7] clk: st: embed clock outputs within drivers

From: Alain Volmat
Date: Thu Jun 17 2021 - 16:38:05 EST


Hi Stephen,

gentle reminder about this serie. Patrick and Rob have given their
Reviewed-by already. Could you have a look at it ?

Thanks.
Alain

On Fri, Apr 30, 2021 at 06:48:30PM +0200, Alain Volmat wrote:
> Hi,
>
> Gentle reminder about this serie concerning STi platform clock drivers.
> Could you have a look at them ?
>
> Thanks.
> Alain
>
> On Wed, Mar 31, 2021 at 10:16:25PM +0200, Alain Volmat wrote:
> > Most of ST clock drivers used by STi platform are updated in
> > order to introduce clock outputs informations within each drivers
> > and thus allow to avoid having to rely on clock-output-names properties
> > within DT clock nodes.
> > For that purpose, drivers are updated to allow handling both modes
> > (with or without clock-output-names).
> > Once all DT will have been updated, the legacy mode could be removed
> > from the drivers.
> > This will also allow, once all STi DT will be corrected, to remove the
> > of_clk_detect_critical API from clk core code since STi clock drivers
> > are the only drivers using this API.
> >
> > Alain Volmat (7):
> > clk: st: clkgen-pll: remove unused variable of struct clkgen_pll
> > clk: st: flexgen: embed soc clock outputs within compatible data
> > dt-bindings: clock: st: flexgen: add new introduced compatible
> > clk: st: clkgen-pll: embed soc clock outputs within compatible data
> > dt-bindings: clock: st: clkgen-pll: add new introduced compatible
> > clk: st: clkgen-fsyn: embed soc clock outputs within compatible data
> > dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible
> >
> > .../bindings/clock/st/st,clkgen-pll.txt | 3 +
> > .../bindings/clock/st/st,flexgen.txt | 10 +
> > .../bindings/clock/st/st,quadfs.txt | 3 +
> > drivers/clk/st/clk-flexgen.c | 367 +++++++++++++++++-
> > drivers/clk/st/clkgen-fsyn.c | 113 +++++-
> > drivers/clk/st/clkgen-pll.c | 121 +++++-
> > 6 files changed, 576 insertions(+), 41 deletions(-)
> >
> > ---
> > v4: - add an additional CLK_IS_CRITICAL within flexgen driver
> > v3: - removal some useless CLK_IS_CRITICAL and add some comments
> > - only keep clk drivers/binding patches within the serie
> >
> > --
> > 2.17.1
> >
>