[PATCH 10/18] staging: rtl8723bs: remove some unused 5Ghz macro definitions

From: Fabio Aiuto
Date: Sat Jun 19 2021 - 06:49:09 EST


remove some unused 5Ghz macro definitions. Fix
comments accordingly.

Signed-off-by: Fabio Aiuto <fabioaiuto83@xxxxxxxxx>
---
drivers/staging/rtl8723bs/hal/odm.h | 1 -
drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h | 2 --
drivers/staging/rtl8723bs/include/hal_com_reg.h | 1 -
drivers/staging/rtl8723bs/include/hal_pg.h | 2 --
4 files changed, 6 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 788fc1c068b5..afb36de7a4e5 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -628,7 +628,6 @@ struct fat_t { /* _FAST_ANTENNA_TRAINNING_ */
u32 MinMaxRSSI;
u8 idx_AntDiv_counter_2G;
u8 idx_AntDiv_counter_5G;
- u32 AntDiv_2G_5G;
u32 CCK_counter_main;
u32 CCK_counter_aux;
u32 OFDM_counter_main;
diff --git a/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h b/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
index 4b3a7c051630..aad962548278 100644
--- a/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
+++ b/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
@@ -558,7 +558,6 @@

#define b3WireRFPowerDown 0x1 /* Useless now */
/* define bHWSISelect 0x8 */
-#define b5GPAPEPolarity 0x40000000
#define b2GPAPEPolarity 0x80000000
#define bRFSW_TxDefaultAnt 0x3
#define bRFSW_TxOptionAnt 0x30
@@ -577,7 +576,6 @@
#define bRFSI_ANTSW 0x100
#define bRFSI_ANTSWB 0x200
#define bRFSI_PAPE 0x400
-#define bRFSI_PAPE5G 0x800
#define bBandSelect 0x1
#define bHTSIG2_GI 0x80
#define bHTSIG2_Smoothing 0x01
diff --git a/drivers/staging/rtl8723bs/include/hal_com_reg.h b/drivers/staging/rtl8723bs/include/hal_com_reg.h
index b14585cb0233..b2f179b48019 100644
--- a/drivers/staging/rtl8723bs/include/hal_com_reg.h
+++ b/drivers/staging/rtl8723bs/include/hal_com_reg.h
@@ -717,7 +717,6 @@ Default: 00b.
/* BW_OPMODE bits (Offset 0x603, 8bit) */
/* */
#define BW_OPMODE_20MHZ BIT2
-#define BW_OPMODE_5G BIT1

/* */
/* CAM Config Setting (offset 0x680, 1 byte) */
diff --git a/drivers/staging/rtl8723bs/include/hal_pg.h b/drivers/staging/rtl8723bs/include/hal_pg.h
index 0b7a8adf5c74..2d8ccc9ddebb 100644
--- a/drivers/staging/rtl8723bs/include/hal_pg.h
+++ b/drivers/staging/rtl8723bs/include/hal_pg.h
@@ -16,10 +16,8 @@

/* For VHT series TX power by rate table. */
/* VHT TX power by rate off setArray = */
-/* Band:-2G&5G = 0 / 1 */
/* RF: at most 4*4 = ABCD = 0/1/2/3 */
/* CCK = 0 OFDM = 1/2 HT-MCS 0-15 =3/4/56 VHT =7/8/9/10/11 */
-#define TX_PWR_BY_RATE_NUM_BAND 2
#define TX_PWR_BY_RATE_NUM_RF 4
#define TX_PWR_BY_RATE_NUM_RATE 84
#define MAX_RF_PATH_NUM 2
--
2.20.1