[PATCH 5.10 108/146] PCI: Mark some NVIDIA GPUs to avoid bus reset

[Greg Kroah-Hartman]

From: Shanker Donthineni <sdonthineni@xxxxxxxxxx>

commit 4c207e7121fa92b66bf1896bf8ccb9edfb0f9731 upstream.

Some NVIDIA GPU devices do not work with SBR.  Triggering SBR leaves the
device inoperable for the current system boot. It requires a system
hard-reboot to get the GPU device back to normal operating condition
post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the
issue.

This issue will be fixed in the next generation of hardware.

Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@xxxxxxxxx
Signed-off-by: Shanker Donthineni <sdonthineni@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reviewed-by: Sinan Kaya <okaya@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/pci/quirks.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3558,6 +3558,18 @@ static void quirk_no_bus_reset(struct pc
 }
 
 /*
+ * Some NVIDIA GPU devices do not work with bus reset, SBR needs to be
+ * prevented for those affected devices.
+ */
+static void quirk_nvidia_no_bus_reset(struct pci_dev *dev)
+{
+	if ((dev->device & 0xffc0) == 0x2340)
+		quirk_no_bus_reset(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+			 quirk_nvidia_no_bus_reset);
+
+/*
  * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset.
  * The device will throw a Link Down error on AER-capable systems and
  * regardless of AER, config space of the device is never accessible again