Re: [PATCH v1 3/3] phy: qcom-qusb2: Add configuration for SM4250 and SM6115

[Bjorn Andersson]

On Tue 22 Jun 15:32 CDT 2021, Iskren Chernev wrote:

> The SM4250 and SM6115 uses the same register layout as MSM8996, but the
> tune sequence is a bit different.
> 

Didn't review the initialization sequence, but it's different from the
existing ones so adding a new compatible and init_tbl seems to be the
right choice.

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qusb2.c | 34 +++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> index 8f1bf7e2186b..3c1d3b71c825 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> @@ -219,6 +219,22 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
>  	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
>  };
>  
> +static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
> +
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
> +
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
> +
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
> +	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
> +};
> +
>  static const unsigned int qusb2_v2_regs_layout[] = {
>  	[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
>  	[QUSB2PHY_PLL_STATUS]		= 0x1a0,
> @@ -342,6 +358,18 @@ static const struct qusb2_phy_cfg sdm660_phy_cfg = {
>  	.autoresume_en	 = BIT(3),
>  };
>  
> +static const struct qusb2_phy_cfg sm6115_phy_cfg = {
> +	.tbl		= sm6115_init_tbl,
> +	.tbl_num	= ARRAY_SIZE(sm6115_init_tbl),
> +	.regs		= msm8996_regs_layout,
> +
> +	.has_pll_test	= true,
> +	.se_clk_scheme_default = true,
> +	.disable_ctrl	= (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
> +	.mask_core_ready = PLL_LOCKED,
> +	.autoresume_en	 = BIT(3),
> +};
> +
>  static const char * const qusb2_phy_vreg_names[] = {
>  	"vdda-pll", "vdda-phy-dpdm",
>  };
> @@ -888,6 +916,12 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
>  	}, {
>  		.compatible	= "qcom,sdm660-qusb2-phy",
>  		.data		= &sdm660_phy_cfg,
> +	}, {
> +		.compatible	= "qcom,sm4250-qusb2-phy",
> +		.data		= &sm6115_phy_cfg,
> +	}, {
> +		.compatible	= "qcom,sm6115-qusb2-phy",
> +		.data		= &sm6115_phy_cfg,
>  	}, {
>  		/*
>  		 * Deprecated. Only here to support legacy device
> -- 
> 2.31.1
>