Re: [PATCH] [RESEND] mmc: sdhci-pci-gli: Improve Random 4K Read Performance of GL9763E

[Adrian Hunter]

On 30/06/21 3:18 pm, Adrian Hunter wrote:
> On 24/06/21 6:25 am, Renius Chen wrote:
>> During a sequence of random 4K read operations, the performance will be
>> reduced due to spending much time on entering/exiting the low power state
>> between requests. We disable the low power state negotiation of GL9763E
>> during a sequence of random 4K read operations to improve the performance
>> and enable it again after the operations have finished.
>>
>> Signed-off-by: Renius Chen <reniuschengl@xxxxxxxxx>
>> ---
>>  drivers/mmc/host/sdhci-pci-gli.c | 86 ++++++++++++++++++++++++++++++++
>>  1 file changed, 86 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
>> index 302a7579a9b3..0105f728ccc4 100644
>> --- a/drivers/mmc/host/sdhci-pci-gli.c
>> +++ b/drivers/mmc/host/sdhci-pci-gli.c
>> @@ -88,6 +88,9 @@
>>  #define PCIE_GLI_9763E_SCR	 0x8E0
>>  #define   GLI_9763E_SCR_AXI_REQ	   BIT(9)
>>  
>> +#define PCIE_GLI_9763E_CFG       0x8A0
>> +#define   GLI_9763E_CFG_LPSN_DIS   BIT(12)
>> +
>>  #define PCIE_GLI_9763E_CFG2      0x8A4
>>  #define   GLI_9763E_CFG2_L1DLY     GENMASK(28, 19)
>>  #define   GLI_9763E_CFG2_L1DLY_MID 0x54
>> @@ -691,6 +694,86 @@ static void sdhci_gl9763e_dumpregs(struct mmc_host *mmc)
>>  	sdhci_dumpregs(mmc_priv(mmc));
>>  }
>>  
>> +static void gl9763e_request(struct mmc_host *mmc, struct mmc_request *mrq)
>> +{
>> +	struct sdhci_host *host = mmc_priv(mmc);
>> +	struct mmc_command *cmd;
>> +	struct sdhci_pci_slot *slot = sdhci_priv(host);
>> +	struct pci_dev *pdev = slot->chip->pdev;
>> +	u32 value;
>> +	static bool start_4k_r;
>> +	static int  continuous_4k_r;
> 
> Please do not use static variables.  Instead define a struct for them and
> set .priv_size in sdhci_pci_fixes e.g.
> 
> struct sdhci_pci_gli {
> 	static bool start_4k_r;
> 	static int  continuous_4k_r;
> };

Cut'n'pasted without paying attention.  This was meant to be:

struct sdhci_pci_gli {
	bool start_4k_r;
	int  continuous_4k_r;
};

> 
> const struct sdhci_pci_fixes sdhci_gl9763e = {
> 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> 	.probe_slot	= gli_probe_slot_gl9763e,
> 	.ops            = &sdhci_gl9763e_ops,
> #ifdef CONFIG_PM_SLEEP
> 	.resume		= sdhci_cqhci_gli_resume,
> 	.suspend	= sdhci_cqhci_gli_suspend,
> #endif
> 	.add_host       = gl9763e_add_host,
> 	.priv_size      = sizeof(struct sdhci_pci_gli);
> };
> 
> And then you can get a pointer to it:
> 
> struct sdhci_pci_gli *sdhci_pci_gli = sdhci_pci_priv(slot);
> 
> 
>> +
>> +	cmd = (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) ? mrq->sbc : mrq->cmd;
> 
> mrq->cmd is always the main command, so why look at mrq->sbc?
> 
>> +
>> +	if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK) {
>> +		if (cmd->data->blocks == 8) {
>> +			continuous_4k_r++;
>> +
>> +			if ((!start_4k_r) && (continuous_4k_r >= 3)) {
>> +				pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>> +				value &= ~GLI_9763E_VHS_REV;
>> +				value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
>> +				pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
>> +
>> +				pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value);
>> +				value |= GLI_9763E_CFG_LPSN_DIS;
>> +				pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value);
>> +
>> +				pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>> +				value &= ~GLI_9763E_VHS_REV;
>> +				value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
>> +				pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
>> +
>> +				start_4k_r = true;
>> +			}
>> +		} else {
>> +			continuous_4k_r = 0;
>> +
>> +			if (start_4k_r) {
>> +				pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>> +				value &= ~GLI_9763E_VHS_REV;
>> +				value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
>> +				pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
>> +
>> +				pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value);
>> +				value &= ~GLI_9763E_CFG_LPSN_DIS;
>> +				pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value);
>> +
>> +				pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>> +				value &= ~GLI_9763E_VHS_REV;
>> +				value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
>> +				pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
>> +
>> +				start_4k_r = false;
>> +			}
>> +		}
>> +	} else {
>> +		continuous_4k_r = 0;
>> +
>> +		if (start_4k_r)	{
>> +			pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>> +			value &= ~GLI_9763E_VHS_REV;
>> +			value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
>> +			pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
>> +
>> +			pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value);
>> +			value &= ~GLI_9763E_CFG_LPSN_DIS;
>> +			pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value);
>> +
>> +			pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>> +			value &= ~GLI_9763E_VHS_REV;
>> +			value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
>> +			pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
>> +
>> +			start_4k_r = false;
>> +		}
> 
> The code chunk above is the same as the previous and almost
> the same as the one before that.  Please make a separate function
> 
>> +	}
>> +
>> +	sdhci_request(mmc, mrq);
>> +}
>> +
>> +
>>  static void sdhci_gl9763e_cqe_pre_enable(struct mmc_host *mmc)
>>  {
>>  	struct cqhci_host *cq_host = mmc->cqe_private;
>> @@ -848,6 +931,9 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
>>  	gli_pcie_enable_msi(slot);
>>  	host->mmc_host_ops.hs400_enhanced_strobe =
>>  					gl9763e_hs400_enhanced_strobe;
>> +
>> +	host->mmc_host_ops.request = gl9763e_request;
>> +
>>  	gli_set_gl9763e(slot);
>>  	sdhci_enable_v4_mode(host);
>>  
>>
>