[PATCH v7 0/5] DTS updates for Marvell Armada CN913x platforms

[kostap]

From: Konstantin Porotchkin <kostap@xxxxxxxxxxx>

This patch series contains the following changes/fixes:
1. Add support for Armada CN913x Development Board topology "B"
2. Add support for Armada CN913x Reference Design boards (CRB)
3. Fixes the NAND paritioninig scheme in DTS eliminating gap between
   consecutive partitions
4. Fix 10Gb ports PHY mode names

v2:
- extract common nodes from DB boards to separate DTSI files
- disable eth2 on CRB boards until the required phy mode support is added
- mention the switch part ID in CRB board description

v3:
- do not rename setup A DTS files for DB variants
- fix a couple of wrong include names

v4:
- Rebase on top of Linus master branch (v5.11-rc7)
- Remove HS400 timing from CRB AP SDHCI (not supported by connected eMMC)
- Add cd-gpio entry to CP0 SDHCI for SD card support
- Add a comment to CN9130-CRB patch about the required defconfig
  changes for supporting the onboard i2c expander
- Add Stefan's patch to enable 10G port on CN9130-DB platforms

v5:
- Extend enablement of 10G port to CN9131-DB platform

v6:
- Rebased on top of 5.13-rc, merging UTMI settings
  (requested by Gregory Clement)

v7:
- Remove documentation patch fixing CP11X references in PHY binding document
- Change Armada's family 10Gb port phy mode names from 10gbase-kr to 10gbase-r

Konstantin Porotchkin (4):
  arch/arm64/boot/dts/marvell: fix NAND partitioning scheme
  arm64: dts: cn913x: add device trees for topology B boards
  arm64: dts: add support for Marvell cn9130-crb platform
  arch/arm64: dts: change 10gbase-kr to 10gbase-r in Armada

Stefan Chulski (1):
  dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boards

 arch/arm64/boot/dts/marvell/Makefile          |   5 +
 .../arm64/boot/dts/marvell/armada-7040-db.dts |   2 +-
 .../arm64/boot/dts/marvell/armada-8040-db.dts |   4 +-
 arch/arm64/boot/dts/marvell/cn9130-crb-A.dts  |  38 ++
 arch/arm64/boot/dts/marvell/cn9130-crb-B.dts  |  46 ++
 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi   | 222 ++++++++++
 arch/arm64/boot/dts/marvell/cn9130-db-B.dts   |  22 +
 arch/arm64/boot/dts/marvell/cn9130-db.dts     | 403 +----------------
 arch/arm64/boot/dts/marvell/cn9130-db.dtsi    | 410 ++++++++++++++++++
 arch/arm64/boot/dts/marvell/cn9131-db-B.dts   |  22 +
 arch/arm64/boot/dts/marvell/cn9131-db.dts     | 197 +--------
 arch/arm64/boot/dts/marvell/cn9131-db.dtsi    | 206 +++++++++
 arch/arm64/boot/dts/marvell/cn9132-db-B.dts   |  22 +
 arch/arm64/boot/dts/marvell/cn9132-db.dts     | 218 +---------
 arch/arm64/boot/dts/marvell/cn9132-db.dtsi    | 227 ++++++++++
 15 files changed, 1241 insertions(+), 803 deletions(-)
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db-B.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db-B.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9132-db-B.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9132-db.dtsi

-- 
2.17.1