Re: [PATCH 03/13] opp: Keep track of currently programmed OPP

[Ionela Voinescu]

Hi Viresh,

On Thursday 08 Jul 2021 at 13:23:53 (+0530), Viresh Kumar wrote:
> On 07-07-21, 11:24, Ionela Voinescu wrote:
> > Now comes the interesting part: what seems to fix it is a call to
> > clk_get_rate(opp_table->clk) in _set_opp(), which is what basically
> > happened before this patch, as _find_current_opp() was always called.
> > I do not need to do anything with the returned frequency.
> 
> Wow, thanks for narrowing it down this far :)
> 
> I had a quick look and this is what I think is the problem here.
> 
> This platform uses mailbox API to send its frequency change requests to another
> processor.  And the way it is written currently, I don't see any guarantee
> whatsoever which say
> 
>   "once clk_set_rate() returns, the frequency would have already changed".
> 

I think what was strange to me was that the frequency never seems to
change, there isn't just a delay in the new frequency taking effect, as
I would expect in these cases. Or if there is a delay, that's quite large
- at least a second.

> And this may exactly be the thing you are able to hit, luckily because of this
> patchset :)
> 
> As a quick way of checking if that is right or not, this may make it work:
> 
> diff --git a/drivers/mailbox/hi3660-mailbox.c b/drivers/mailbox/hi3660-mailbox.c
> index 395ddc250828..9856c1c84dcf 100644
> --- a/drivers/mailbox/hi3660-mailbox.c
> +++ b/drivers/mailbox/hi3660-mailbox.c
> @@ -201,6 +201,9 @@ static int hi3660_mbox_send_data(struct mbox_chan *chan, void *msg)
> 
>         /* Trigger data transferring */
>         writel(BIT(mchan->ack_irq), base + MBOX_SEND_REG);
> +
> +       hi3660_mbox_check_state(chan);
> +

I gave this a try an it does work for me.

>         return 0;
>  }
> 
> -------------------------8<-------------------------
> 
> As a proper fix, something like this (not even compile tested) is required I
> believe as I don't see the clients would know if the transfer is over. Cc'ing
> mailbox guys to see what can be done.
> 

I'll give this a try as well when there is consensus. I might even try to
review it, if the time allows.

Many thanks,
Ionela.

> diff --git a/drivers/clk/hisilicon/clk-hi3660-stub.c b/drivers/clk/hisilicon/clk-hi3660-stub.c
> index 3a653d54bee0..c1e62ea4cf01 100644
> --- a/drivers/clk/hisilicon/clk-hi3660-stub.c
> +++ b/drivers/clk/hisilicon/clk-hi3660-stub.c
> @@ -89,7 +89,6 @@ static int hi3660_stub_clk_set_rate(struct clk_hw *hw, unsigned long rate,
>                 stub_clk->msg[0], stub_clk->msg[1]);
>  
>         mbox_send_message(stub_clk_chan.mbox, stub_clk->msg);
> -       mbox_client_txdone(stub_clk_chan.mbox, 0);
>  
>         stub_clk->rate = rate;
>         return 0;
> @@ -131,7 +130,7 @@ static int hi3660_stub_clk_probe(struct platform_device *pdev)
>         /* Use mailbox client without blocking */
>         stub_clk_chan.cl.dev = dev;
>         stub_clk_chan.cl.tx_done = NULL;
> -       stub_clk_chan.cl.tx_block = false;
> +       stub_clk_chan.cl.tx_block = true;
>         stub_clk_chan.cl.knows_txdone = false;
>  
>         /* Allocate mailbox channel */
> diff --git a/drivers/mailbox/hi3660-mailbox.c b/drivers/mailbox/hi3660-mailbox.c
> index 395ddc250828..8f6b787c0aba 100644
> --- a/drivers/mailbox/hi3660-mailbox.c
> +++ b/drivers/mailbox/hi3660-mailbox.c
> @@ -1,5 +1,5 @@
>  // SPDX-License-Identifier: GPL-2.0
> -// Copyright (c) 2017-2018 HiSilicon Limited.
> +// Copyright (c) 2017-2018 Hisilicon Limited.
>  // Copyright (c) 2017-2018 Linaro Limited.
>  
>  #include <linux/bitops.h>
> @@ -83,7 +83,7 @@ static struct hi3660_mbox *to_hi3660_mbox(struct mbox_controller *mbox)
>         return container_of(mbox, struct hi3660_mbox, controller);
>  }
>  
> -static int hi3660_mbox_check_state(struct mbox_chan *chan)
> +static bool hi3660_mbox_last_tx_done(struct mbox_chan *chan)
>  {
>         unsigned long ch = (unsigned long)chan->con_priv;
>         struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
> @@ -94,20 +94,20 @@ static int hi3660_mbox_check_state(struct mbox_chan *chan)
>  
>         /* Mailbox is ready to use */
>         if (readl(base + MBOX_MODE_REG) & MBOX_STATE_READY)
> -               return 0;
> +               return true;
>  
>         /* Wait for acknowledge from remote */
>         ret = readx_poll_timeout_atomic(readl, base + MBOX_MODE_REG,
>                         val, (val & MBOX_STATE_ACK), 1000, 300000);
>         if (ret) {
>                 dev_err(mbox->dev, "%s: timeout for receiving ack\n", __func__);
> -               return ret;
> +               return false;
>         }
>  
>         /* clear ack state, mailbox will get back to ready state */
>         writel(BIT(mchan->ack_irq), base + MBOX_ICLR_REG);
>  
> -       return 0;
> +       return true;
>  }
>  
>  static int hi3660_mbox_unlock(struct mbox_chan *chan)
> @@ -182,10 +182,6 @@ static int hi3660_mbox_send_data(struct mbox_chan *chan, void *msg)
>         unsigned int i;
>         int ret;
>  
> -       ret = hi3660_mbox_check_state(chan);
> -       if (ret)
> -               return ret;
> -
>         /* Clear mask for destination interrupt */
>         writel_relaxed(~BIT(mchan->dst_irq), base + MBOX_IMASK_REG);
>  
> @@ -207,6 +203,7 @@ static int hi3660_mbox_send_data(struct mbox_chan *chan, void *msg)
>  static const struct mbox_chan_ops hi3660_mbox_ops = {
>         .startup        = hi3660_mbox_startup,
>         .send_data      = hi3660_mbox_send_data,
> +       .last_tx_done   = hi3660_mbox_last_tx_done,
>  };
>  
>  static struct mbox_chan *hi3660_mbox_xlate(struct mbox_controller *controller,
> @@ -259,6 +256,7 @@ static int hi3660_mbox_probe(struct platform_device *pdev)
>         mbox->controller.num_chans = MBOX_CHAN_MAX;
>         mbox->controller.ops = &hi3660_mbox_ops;
>         mbox->controller.of_xlate = hi3660_mbox_xlate;
> +       mbox->controller.txdone_poll = true;
>  
>         /* Initialize mailbox channel data */
>         chan = mbox->chan;
> 
> -- 
> viresh