Re: [PATCH V1 net-next 1/5] dt-bindings: fec: add the missing clocks properties
From: Rob Herring
Date: Wed Jul 14 2021 - 19:19:20 EST
On Fri, Jul 09, 2021 at 04:18:19PM +0800, Joakim Zhang wrote:
> From: Fugang Duan <fugang.duan@xxxxxxx>
> Both driver and dts have already used these clocks properties, so add the
> missing clocks info.
> Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> Documentation/devicetree/bindings/net/fsl-fec.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
There's enough changes in this series, please convert this to schema.
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index 9b543789cd52..6754be1b91c4 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -39,6 +39,17 @@ Optional properties:
> tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts.
> For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse
> per second interrupt associated with 1588 precision time protocol(PTP).
> +- clocks: Phandles to input clocks.
> +- clock-name: Should be the names of the clocks
> + - "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing.
> + - "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock.
> + - "ptp"(option), for IEEE1588 timer clock that requires the clock.
> + - "enet_clk_ref"(option), for MAC transmit/receiver reference clock like
> + RGMII TXC clock or RMII reference clock. It depends on board design,
> + the clock is required if RGMII TXC and RMII reference clock source from
> + SOC internal PLL.
> + - "enet_out"(option), output clock for external device, like supply clock
> + for PHY. The clock is required if PHY clock source from SOC.
> Optional subnodes:
> - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes