[PATCH 0/3] OCC: fsi and hwmon: Set sequence number in submit interface

From: Eddie James
Date: Fri Jul 16 2021 - 11:19:44 EST

Conflicting sequence numbers have resulted in users of the OCC interface
getting the wrong response. For example, both the hwmon driver and an
application might send a transfer near the same time with the same sequence
number, and then one or both will get an incorrect respnse, but cannot tell
because the sequence number looks correct.
Perform the sequence numbering in the submit interface to make sure each
transfer has a unique sequence number. This also requires that the submit
interface perform the checksum calculation for the command. Adjust the hwmon
driver accordingly too.

Eddie James (3):
fsi: occ: Force sequence numbering per OCC
hwmon: (occ) Remove sequence numbering and checksum calculation
fsi: occ: Add dynamic debug to dump command and response

drivers/fsi/fsi-occ.c | 98 +++++++++++++++++++++++++++++++-------
drivers/hwmon/occ/common.c | 30 +++++-------
drivers/hwmon/occ/common.h | 3 +-
drivers/hwmon/occ/p8_i2c.c | 15 +++---
drivers/hwmon/occ/p9_sbe.c | 4 +-
5 files changed, 105 insertions(+), 45 deletions(-)